mtu 12 v used for sale

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Manufacturer: Graco Membranenpumpe, Type: A-1211, Transmission ratio: 125-8,6,

Manufacturer: Kremlin, Type: 16-120 F, Transmission ratio: 16 : 1, Compressed air bar max: 96, Förderleistung l/min: 6, Druckluft max bar: 6, FREE TEXT: geprüft,

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-D125100 ENGINE: Deutz BF4M1013FC FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1900kg DIMENSIONS L/W/HEIGHT (MM): 280011501600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry wit ...

Key data: 120 KW, 150 kVA, 400 V

MODEL: EQ-D150120 ENGINE: Deutz BF6M1013EC G1 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 150(kVA) / 120(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2200kg DIMENSIONS L/W/HEIGHT (MM): 280011501600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry  ...

Qty. 1 Second-hand extrusion press with piercer Mfc.: UBE Force: 800 MT Built: 1979 Revamped: new hydraulic in 2010 Container dimensions: Dia. 90 x 555 mm Dia. 127 x 560 mm Dia. 132 x560 mm Material: Copper, Brass, Aluminium, Silver etc. Press is in good condition & on foundation

TO WHOM IT MAY CONCERN; FOR SALE .. WE VE COMPLETE GENSET DEUTZ BA 12M 816 AT OUR STOCK. PLS FIND ENGINE & ALTERNATOR DETAILS ON BELOW . EX STOCK READY TO DELIVER. RUNNING HRS 5754 ENGINE 776HP 1800 RPM ENGINE NO. 663993 YOB 1981 ALTERNATOR MANUFACTURE AEG YOB 1991 VOLT 450 60 Hz CLASS DNV IF YOU've ANY FURTHER QUESTIONS PLS DO need HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Used spiral mixer DIOSNA, type: SP 120 D - complete Ã?berholt- -for 120 kg of dough and 75 kg of flour -Spiral made of stainless steel -Boiler in stainless steel -2 time clocks -2 speeds -1 reverse Emergency stop switch -Condition: Very good Including delivery within Germany. The spiral mixer was reconditioned refurbished and is located in a very good condition. Inspection and testing according to arrangement.

We offer formwork Peri Trio 270 x 120, 14 pieces with a 65% discount on a new value of €1,786.00/pc = special net price €625.10/pc. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, with top used original Peri Finply formlining, checked and sorted. Sold individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

No.2 "O.M. LESMO" No.2 CORDATRICI TORSION "O.M. LESMO" TORSIONE BOBINE 1250 MM No.9 CONSS FOR BOB DIA 1250 AND No. 9 TRANSPALLET ECLTS No.5 BAR ABAR WITH BILANCINO FOR BOB - 1000

Dear's Sale, used 2 complete engine Wartsila 12V32 Also, cover, piston, liner, conrod new/used, fuel pump, 12cyl std cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

PAGO 15/120E-x side labeler from 2011 Label height: 120mm Can be used for many purposes such as; carton labeling, adjusted to label bottles and other products Attached with a Thermic Transfer printing module Delivered with documentation Condition: good Dimensions: 650mm x 420mm & 570mm (LxW&H)

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001

optional with 2 to 10 stainless steel boilers with pliers lock with control cabinet Boiler capacity approx. 190 litres for max. 120kg dough or for a maximum of 75 kg flour with Eaton PLC control Machine is in very good condition

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

with boiler for max. 125 kg flour or 200 kg of dough with 2 timers automatic Boiler diameter 90 cm Boiler drive by Reibrand Boilers are locked with hand extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tool made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is driven in and out

Qty. 1 Second-hand Sendzimir rolling mill Mfc.: INNSE Type: ZR-22- 49” Built: 1960’s Strip width: 1270 mm Thickness Entry: 5.0 mm Exit: 0.4 mm Mill motor: 1640 kW, 2200 HP Qty. 2 Reel motors: 932 kW, 1250 HP Rolling speed: 0 – 163/288 m/min. Max. coil dia.: 1574 mm Winder mandrel dia.: 610 mm Coil weight: 21 Tons Max. tension: 300 kN Max. roll separating force: 6000 kN Work rolls dia.: 48-61 mm

R&E Conveyor No 2618 Y.O.M. 1998 Width 2x 650 Length 16 m Curved, head approx. 6 m Good condition!

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

According to the PDF prospectus!

Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R

Blow volume 0.2-2.0 ltr. PET stretch blower, 3 blow stations, capacity: up to approx. 3,600 bottles / h. Incl. preform bunker, lift and sorter, Available at extra cost: compressor, cooler and moulds

Machine will be complete refurbished with new parts width: 1200 mm PLC: Siemens S5 Diameter: 2-10 mm Pull out unit: MVL5

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

Material : Stainless steel Drive: 30 KW Volume: 1200 ltr. - incl. control cabinet; --> Mixer with drive mounted on base frame.

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Article number: 1260522-0000 Photocell PT 21 for Tetra Pak Pull Tab Applicator 21

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

ERMAK RPP 1270X30 punching machine was built in 2013 in Turkey by ERMAKSAN MAKINA SANAYI VE TIC. AŞ. The machine, which is distinguished by its high productivity and precision, is used in the machining of thin sheet metal with a maximum thickness of 6.35 mm. All machining processes are performed on a large brush table by a reliable working head, which operates with a maximum force of 30 tonnes. The brush table prevents scratches and nicks on the sheet metal surface during material feed, and also significantly reduces noise level. All this is complemented by a FANUC CNC control with an intuitive interface that allows advanced machining programmes to be created in just a few steps. The ERMAK RPP 12730 CNC punching machine weighs 11000 kg. It is also possible to purchase Metalix CAD/CAM software at an additional cost of 10500 EUR net. Technical specifications of the ERMAK RPP 1270X30 ...

One belt press press EBS 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 850 kg

One belt press EBK 610 Capacity: 1200 kg/h Technical specifications: Maximum hourly output: 1200 kg/h Belt width: 600 mm Electrical connection data: 400V /16A/ 0,37 kW Pneumatic connection data: max. 6 bar Water requirement: 12 l /min Dimensions: L x W x H: 2650 x 1200 x 1520 mm Weight: 790 kg

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20096 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20097 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

ID NO 20109 MARINE DIESEL ENGINE Reference number 20109 Brand DETROIT Model 12V71 Power 382 HP RPM 1800 MAX RPM 1950 Serial number 12VA 085003 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 30 Flywheel INCLUDED Governor Exhaust system WET Turbo NONE Cooling system HEAT EXCHANGER Starter INCLUDED Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO PANEL Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) APPROX 2500 KG

Used commercial kitchen equipment from a retirement home. Supply capacity for about 45 people. Cooking island consisting of boiling kettle, tilting frying pan, MKN magnum pan, 2 gas hobs, 2 hotplates, 1 Rational combi steamer CM 101 G and a matching extractor hood. 4-5 work tables with undercounter cabinets/undercounter shelves 4 wall cabinets Racking units Confection cooler We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. Good, used, technically perfect condition. We will be happy to send you further information and photos on request. Matching this commercial kitchen and from the same resolution, we also sell the associated commercial kitchen dispensing station, a complete cafeteria, a dishwashi ...

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Zalkin capping machine replacement parts Size 35 x 18

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Plug 1 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2002 Power: 1250 kVA HV voltage: 5775/5500/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU Total weight: 2665 kg Condition: Good condition sold as is, with no warranty. Plug 2 – 1600 kVA Transformer Manufacturer: Pauwels France Year: 2004 Power: 1600 kVA HV voltage: 5750/5500/5225 V LV voltage : 2253.07 V LV Current: 167.96 A Cooling: ONAN Insulation: OIL Winding: Total mass: 3200 kg Condition: Good condition, sold as is, no warranty. Plug 3 – 1250 kVA Transformer Manufacturer: France Transfo / Schneider Electric Year: 2004 Power: 1250 kVA HV voltage: 5775/5637/5500/5362/5225 V LV voltage: 410 V LV Current: 1760.2 A Cooling: ONAN Insulation: OIL Winding: ALU  ...