mtu 12 v used for sale

- Cover Lid MWM 12076227 Original - Suitable for several motors - Please note! Price per piece! - 12076227 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...

- Lubricat. oil pump oil pump MWM 12304041 - Suitable for several motors - Please note! Price per piece! - 12304041 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...

-Three-way cock MWM 12022945 - Suitable for several motors - Please note! Price per piece! - 1202 2945 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new ...

- Inletpipe intake line MWM 12302410 - Suitable for several motors - Please note! Price per piece! - 12302410 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

- Tube Bundle 12276572 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies a ...

- Connecting Rod Connecting Rod MWM 12341310 - Suitable for several motors - Please note! Price per piece! - 12341310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and  ...

Kneading spiral spiral for Diosna spiral kneader Model: SP 120 D Stainless steel Ready to ship! More kneading spirals on request! ; ready to ship

- Toothed gear MWM 12300502 - Suitable for several motors - Please note! Price per piece! - 12300502 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new  ...

- Stop ring inrun ring MWM 12302113 - Suitable for several motors - Please note! Price per piece! - 12302113 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

FOR SALE... WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY TO WHOM IT MAY CONCERN; WE VE WARTSILA DIESEL 12V25 KW2760 YOB 1993 ENGINE AT TURKEY PLS FIND ENGINE SPECIFICATION AT BELOW. RATED POWER 2760kW RATED SPEED 900r/min SERIAL NO. 3711 MADE IN SWEEDEN CRANKSHAFT STD SIZE MEASURMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best of regards; Aliaga marine services : info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Key data: 800 KW, 1000 kVA, 400 V

ENGINE: 12M33D900E310NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 1000kVA) / 800(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 7500kg DIMENSIONS L/W/HEIGHT (MM): 550020002100 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full a ...

Key data: 1250 KW, 1500 kVA

ENGINE: 4012-46TAG2A FREQUENCY (HZ): 50 POWER: 1500kVA / 1250(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 13388kg DIMENSIONS L/W/HEIGHT (MM): 640022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information  ...

Watson Marlow 120U/DV Peristalsis Pump Original Price 9100 The Series 100 pumps are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability, but also ease of use for single-use systems. An error-free hose change takes only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our Series 100, with its exceptional 2,000:1 speed range, offers exactly the flexibility and purity that are essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Specifications:  Protection class enclosure IP 31 Maximum pressure 30 psi Model 120 U/DV Flow rate 0.001 to 170 mL/min at 30 psi Motor Speed 0.1 to 200 rpm Temperatur ...

Sheet thickness aluminium: 1.00 mm Due to the bevel cut, the X-Cut machine can not only cut straight strips in the longitudinal and transverse directions, the automated bevel cut opens up many new possibilities for cutting the different surfaces quickly and accurately. Saves up to 90% of the time Up to 60 degrees angle adjustment in both directions Intuitive operation thanks to touchscreen and calculation aids Thanks to optimized software, cutting trapezoidal surfaces, triangular surfaces and other surfaces for standing seam roofs and wall cladding is no problem Due to the fully automated bevel cutting and the versatility and accuracy of the software, a high level of time savings can be achieved during production in the company and also during installation on the construction site Automatic operation: Enter the desired length and the number of pieces to be cut automatically. Tota ...

MATERIAL: ∙ LDPE 0.020 – 0.160 mm ∙ PE / OPP 0.012 – 0.100 mm ∙ CPP 0.020 – 0.050 mm ∙ BOPP, PET, OPA 0.010 – 0.025 mm ∙ Paper 25 – 120 g/m2 ∙ Laminate 0.02 – 0.12 mm BASIC TECHNICAL PARAMETERS: Max printing width: 1270 mm Max material width: 1320 mm Min material width: 500 mm Min printing repeat: 360 mm Max printing repeat: 800 mm Anilox cylinder inner diam. 136,989 mm perimeter 500 mm sleeve length 1350 mm Max. mechanical speed 300 m/min Working printing speed Tension in printed web: depends on kind and quality of printed material, printing inks, ink transfer, printing repeat length, printing plates, kind of printed motive: cross lines – screen density, anilox rollers volume, dot gain, lacquer, surrounding temperature and type of doctor ...

Part Number 7407 SPECIFICATIONS - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 620mm - max saw blade diameter 450mm - blade bore diameter 90mm in advance: -Triggers - 2 pulling shafts, toothed From below: -Triggers - 2 pulling shafts, smooth - shaft with saws - Pulling shaft, smooth - 2 types of feed speeds - feed motor 4.4kW - 30kW motor - machine dimensions length/width/height 2370x1400x1800mm - weight about 3000kg – Polish production – used machine, very good condition Net price: 45 900 PLN Net price: 10 432 EUR depending on the price 4,40 EUR (Prices are subject to change with higher fluctuations)

Key data: 100 KW, 125 kVA, 400 V

MODEL: EQ-BG125100 ENGINE: WP6D132E300NG FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 125(kVA) / 100(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: LPG; LNG; Gas COOLING: WATER-COOLED WEIGHT: 1085kg DIMENSIONS L/W/HEIGHT (MM): 25329501365 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your d ...

Key data: 1000 KW, 1250 kVA, 400 V

ENGINE: 4012-46TWG2A FREQUENCY (HZ): 50 POWER: 1250kVA / 1000(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 13025kg DIMENSIONS L/W/HEIGHT (MM): 640022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or individual ad ...

3DYY 9-12PLC rotary transfer machine manufactured in 2020 in China by Zhejiang Mingwen Machine Tool Co., Ltd is designed for high-volume production of e.g. sanitary, gas and hydraulic fittings. The machine, which combines the features of several metal-working machines, performs sequential machining operations on parts placed in special holders, i.e. milling, threading and drilling, in just one working cycle. The finished parts, i.e. fittings, couplings and extensions, are distinguished by their high quality. In this way, the 3DYY9-12PLC transfer machine generates considerable savings, as well as ensuring production efficiency, thanks to its speed and flexibility. The multi-spindle machining center has so far been used to machine 1/2″ internal and external threads from fi 24 x 6k14 brass rod. It took less than 4 seconds to produce 1 external thread. The total weight of the machine is ...

Attachment pocket filter with 12 m2 filter area (12 pockets, 500 mm x 1,100 mm each), 1.5 kW fan (1,500 m3/h) and jet cleaning, flange dimensions: 1,230 mm x 630 mm. Multiple identical units available.

Key data: 1000 KW, 1250 kVA, 400 V

ENGINE: Cummins KTA38-G9 FREQUENCY (HZ): 50 VOLTAGE (V): 400/230 POWER: 1250kVa / 1000kW STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 8200kg DIMENSIONS L/W/HEIGHT (MM): 445018502350 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full add ...

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).

Key data: 1200 KW, 1500 kVA, 400 V

ENGINE: 4012-46TAG2A FREQUENCY (HZ): 50 POWER: 1500kVA / 1250(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 13388kg DIMENSIONS L/W/HEIGHT (MM): 640022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information o ...

CNC Double column Coordinate Boring Machine with Deep Hole Drilling Support Kolb KBN G 120 Year of manufacture 1984 / Retrofitted with Heidenhain TNC 426 in 2006 Table size 4250 x 2200 mm Table load max. 14 t Table longitudinal travel X 3000 mm Main spindle cross travel Y 2180 mm Deep hole drilling support cross travel A - 2000 mm Spindle vertical travel Z 500 mm Distance between the columns 2640 mm; Spindle to table 100 - 1300 mm; Spindle diameter 224 mm Spindle drive motor rating 46 KW Spindle speeds 14 - 1400 rpm Spindle taper ISO 50 Drilling in steel ST60 : 100 mm diameter; Boring to 300 mm; Threading to M 125 x 3; Milling capacity 730 cm³/min.; Second support for Deep Hole Drilling Spindle speeds for BTA and ELB boring 315 - 3150 rpm High pressure cutting oil delivery to spindle Chip- and oil collection and separation via Centrifuge. Very good condition P ...

Key data: 1200 KW, 1500 kVA, 400 V

ENGINE: 4012-46TAG2A FREQUENCY (HZ): 50 POWER: 1500kVA / 1250(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 13388kg DIMENSIONS L/W/HEIGHT (MM): 640022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information o ...

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

This machine is particularly suitable for the processing of electric wastes with PVC and rubber and is almost entirely made of aluminium. Heavy drive wheels enable the modification of large cable diameters. Hole Guide for small diameter by 1-52 mm. Hole Guide for large diameters of 30-100 mm and 30-120 mm. The RMH 100/120 has a two blade system and is forward and down. The knife systems can be used simultaneously. Holes on the base plate to the fasten the machine on a table or work bench. Cutting speed 25 m / min

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

3 Transformer Power 1250 kva

LHS Lagertechnik, supplier of new and used storage technology. We provide you with racking systems, industrial trucks, accessories and other warehouse inventory. In this ad, you will buy as follows: - Toyota BT cantilever stacker / type RWE 120 / year of construction 2014 - Only 463 hours / very good condition - Load capacity 1,200kg / lifting height 2,400mm - Low overall height with free lift / suitable for containers - Fork length 1,150mm - Battery: 24V / with Auquamatic function / BJ 2014 - External 24 volt charger NEW UVV test, but sold without guarantee and warranty, as used equipment Price gross incl. 19% VAT ex warehouse Kaarst, invoice with stated VAT will be issued Self-collectors welcome / Free loading / Shipping can be organized nationwide with low-loader & ground-level unloading / Please inquire about your transport costs. Errors / prior sale of used goo ...

Pump Allweiler SNEF120ER46D6.9W61-BGOR - see picture Next: ALWEILER pump with tank Diverse pumps ALLWEILER - for cooling etc., approx. 40 bar (see picture)

approx. 4x belt conveyors, transnorm, approx. 1m long – used - : Price per piece ex location (net): only 595.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos1+2+21+22 Manufacturer: Transnorm Type: TS 1200 Belt Conveyor / Type: 1600-105 Year of Make: 1996 Element length: 100cm Element width: approx. 50cm Strap width: approx. 40cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°

For sale a grid box 1200x840x950mm (L x W x H) execution is verzinkt.klappbarstapelbarTragkraft Max 900KgMasche 60x120mmBei any further questions please contact us at. Shipping possible!

Equipment perfect binder o hand fed o 3 clamps o milling and roughening station o hot melt spine gluing unit ; working condition

Sweco Taumel sieve ø 1200 mm different screens available.

LVD Siena strippit 1212 punching machine was built in 2005 in Belgium by LVD Group NV. Designed for machining steel and aluminium sheets, the machine is an excellent choice for both unit and batch production. Reliable components with excellent performance, combined with a compact design based on a one-piece frame, ensure that the SIENA 20 1212 punching machine delivers excellent precision and machining quality for many years of use. The capacious, 27-station turret with 3 auto-index stations and MultiTool support offers a wide variety of machining options and a high level of flexibility. Precision tools punch metal sheets with a force of 20 tonnes on a large brush table, which protects the surface of the workpiece from scratches and scrapes, while increasing the quality of machining. All of this is completed by the GE FANUC CNC control with its unique Smart Stroke function for automat ...

2014 Dimension SST 1200ES - washer included and a lot of washing ”powder” and build plates. - Trolly

Resin production plant. Capapcity 1200 tons per month. Plant can produce acrylic resins, alahide resins, poliuerethane resins on  buthyl octate base, acetone base, and xylane base. Plant can produce 55-60% resin concentrate wchich acan later be diluted in another factory. Plant has 3 main pressure reactors each 10 ton of batch. Plant has a storage tanks 160000 L tanks. Plant is build in Atex execution. More information available upon request. Advise on resin production technology, recepies and technological advise is possible on separate agreement and price. Below you can find a photo gallery of the factory, more information please call.

PART NUMBER: 7521 Specifications: - inlet width 520mm - inlet height 180mm - shaft width 520mm - shaft diameter 400mm - number of knives 2pcs - sieve dimensions 100x100mm - toothed pulling shaft at the bottom - 2.2kW lower shaft motor - toothed pulling shaft from above - upper shaft motor 2.2kW - feeder length 4400mm - width of the feeding belt 500mm - feeder motor power 1.4kW - main motor 55kW - dimensions of the receiving feeder length/width 8050x880mm - belt width 600mm - dimensions of the machine with the feeding feeder length/width/height 6400x1900x1840mm - weight about 4500kg ADVANTAGES – made in Germany – with a belt feeder: infeed, outfeed – adjustable height of the take-up feeder – used chipper, very good condition Net price: 100000 PLN Net price: 23256 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

The scope of delivery includes: 01x Surface-mounted shelf rack, used Material colour: hot-dip galvanised Total depth: approx. 2,520 mm (lifting rod direction) for double rows: 2x 1,100 mm Inner depth: approx. 2,517 mm Overall width: approx. 1,120 mm (crossbar direction) Bearing rod diameter: 30|1.50 mm Frame height: approx. 30 mm Mesh size: approx. 68 x 45 mm Weight | Pcs.: approx. 30,83 Kg Internal designation: GR-114 Note: The grating may have damage, scratches, dents, welds. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Cross1000 mmLongitudinal1250 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring  ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Transverse stroke490 mmLongitudinal stroke1200 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...