mtu 12 v used for sale

Fiber optic amplifier, fiber optic sensor -Manufacturer: Keyennce -Type: FS-V31CP -Weight: 0.2 kg

Key data: 3200 , 1300 , 200

Processing field 1300 x 3200 mm Z axis 200 mm 2 Fields of work Automatic lubrication Rotary tool changer 8 slots removable with tool changer on the machine stand or change on 12 seat changers Net weight approx. 4 ton

Verboom tenon milling machine Brand: Verboom Type: PN 5 LINKS Standard: BHG / SHA adapted according to the currently valid regulations Labour legislation applicable within the EU Machine data: Pinon milling machine with 5 processing units (1 saw + 4 milling machines) 1. Saw unit positioned over the workpiece, 4.0 kW, ø400 mm 2 tenon milling unit over the workpiece with 2.2 kW 3. Pinon milling unit below the workpiece with 2.2 kW 4. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive 5. Vertical milling spindle (slot milling unit) with ø40 spindle and 200 mm Clamping length, 4.0 kW direct drive All motors are equipped with zero branch safety, The machine has a pressure guard so that the workpiece must be clamped before the aggregates start, The hood and the protective curtain are equipped with door switch. ...

The detection is set up on 0.5l glass bottles in the 20 module box. The inspector is equipped with a multi-camera system. As soon as a foreign bottle is detected in the box, it is then discharged via a pusher. Currently is set to cross travel. The detection is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in an other line. Currently the set up is for a long side leeding crate.

technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

technical details: - Volume flow (V): 8,000 m3/h - Shaft power (Pw): 18.5 kW - Shaft speed (nw): 2717 rpm - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Engine: - Power: 22 kW - Characteristics: 400 V / 37.5 A / 50 Hz - see engine plate (photo) Dimensions (W x H x D): 1,300 x 1,100 x 1,550 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

1) Hose HD DN 10 1100mm with integration 41111580 - 4 pcs; 2) Hose HD DN 10 900mm with integration 41112053 - 4 pcs;

Dissolver Vollrath Loher EC 10-6 Explosion protected version Power 5,2 kW

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1440 rpm -Shaft: 38 mm -Design: B5 -Protection rating: IP54 -Quantity: 1 available -Dimensions: 510/290/H330 mm -Weight: 86 kg

Bosch VMA70CR001-D, 1070070783-508 plus VMA/000/0.42-D plug-in card70A 380V-460V Item condition: Used, in perfect condition More products of this category can be found in our extensive EBAY assortment. More plug-in cards - new and used - can be found in our shop! International shipping costs on request! Plug-in cards and other products buy cheap - Here you buy goods from the professional for the professional - In our SHOP you will find more attractive offers

Bosch VMA70CR001-D, 1070070783-507 70A 380V-460V + VMA/000/0.42-D plug-in card Item condition: Used, in perfect condition R10B2_EK (BOR) More plug-in cards - new and used - can be found in our shop! International shipping costs on request!

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

8 Color Stack UV Flexo Printing Machine Overhauled 2020 with installation IST MBS 7 UV system in 2020. Substrates: OPP,BOPP,PET,PVC,OPS,paper,aluminium foil. Print width max 560 mm, Material width max 580 mm 8 flexo printing units Speed 200 m/min, Camera (E+L) Register control (E + L

Reconditioned marine transmission ZF 63 E-Volvo for sale. Translation: A=1.75, B=1.77. The gearbox has been expertly overhauled and tested in our company.

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

sheet width - max.: 0100 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - manually adjustable brake - Rear handguard - Restriction ring in front - Movable on frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Product number: 2644J Type: VM400HD Belt width: 400 mm Capacity: max 50 strokes/min. Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 2150 x 800 x 2250 mm Weight: 820 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 5.5 kW -Speed range: 15 to 90 rpm -electrically adjustable -Drive shaft: Ø 40 mm -Design: B3 -Protection rating: IP54 -Dimensions: 600/700/H270 mm -Weight: 130 kg

Fuel sensor, tank sensor, float, tank gauge -Part number: 14373363-3 -Dimensions: 740/110/H70 mm -Weight: 1 kg

Sandpaper, emery paper, abrasive cloth -Number: 1x item of abrasive cloth (yard goods) -Grains: different -Packed: on EURO pallet -Weight: 168 kg

current capacity: max. 13 KW throat: 120 mm contact pressure capacity: max. 120 kp voltage: 400 V open-circuit voltage: 2,5 V welding power: max. 2 x 2mm Blech fuse protection -thermal: 16 A total power requirement: 13 kW weight of the machine ca.: 12 kg dimensions of the machine ca.: 0,5 x 0,1 x 0,2. m Manual spot welding machine with 2 sets of welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece

Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,470 mm Total height: approx. 1,115 mm Material color: black Tyres: 4 tyres (2x braked) Material: Polyethylene (PE) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,115 mm Total height: approx. 1,470 mm Material color bin: black Material color lid: green Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle

Electric motor, three-phase motor -Power: 2.2 kW -Speed: 705 rpm -Shaft: Ø 32 mm -Design: B3 -Protection class: IP 44 -Quantity: 1 piece available -Dimensions: 440/225/H290mm -Weight: 44 kg

Electronics module -Isra Vision Systems AG: PCspork v1 1 -Dimensions: 127/153/H22 mm -Weight: 0.13 kg

Input module for valve terminals -Type: VIGE-03-FB-8 -Inputs: 4 -5- pole -PNP -Dimensions: 132/40/H70 mm -Weight: 0.27 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm -Weight: 19 kg

electric motor, three-phase motor -Power: 0.12 kW -Speed: 1360 rpm -Shaft diameter: 11 mm -Design: B3 -Protection class: IP 44 -Quantity: 1 available -Price: per piece -Dimensions: 215/112/H150 mm -Weight: 5.6 kg

Electric motor, three-phase motor -Power: 0.22/0.4 kW -Speed: l 695/1350 rpm -Shaft diameter: 18 mm -Construction: B3 -Protection class: - -Dimensions: 275/175/H215 mm -Weight: 15 kg

Electric motor, three-phase motor -Power: 0.12 kW -Speed: 870 rpm -Shaft diameter: 11 mm -Construction: B3 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 180/134/H160 mm -Weight: 6 kg

Electric motor, three-phase motor -Power: 0.52 kW -Speed: 2785 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 56 -Dimensions: 205/125/H175 mm -Weight: 8 kg

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 180/120/H160 mm -Weight: 6 kg

turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three-phase motor, electric motor -Power: 0.18 kW -Speed: 1340 rpm -Shaft: Ø 11 mm -Design: B3 -Protection class: IP 54 -Dimensions: 185/131/H175 mm -Weight: 6 kg

electric motor, three-phase motor -Power: 1.4 kW -Speed: 2850 rpm -Shaft diameter: 18/22 mm -Design: B5 -Protection class: IP 56 -Weight: 15 kg

Electric motor, three-phase motor -Power: 2.1 kW -Speed: 2870 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Number: 1x motors available -Price: per piece -Dimensions: 290/160/H205 mm -Weight: 18 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 2860 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 56 -Price: per piece -Number: 3x available -Dimensions: 285/160/H205 mm -Weight: 18.4 kg

Three-phase motor, electric motor -Power 0.18 kW -Speed: 880 rpm -Shaft: Ø 14 mm -Construction: B3 -Protection class: -Dimensions: 215/135/H160 mm -Weight: 7.4 kg