128,877 used machines on RESALE, but how to find them? Machine Search
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg
collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spiral mixer Kemper SPA125 Type: SPA125 with 2 boilers for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers (New) Boiler diameter 90cm -Tub capacity: 300 liters Boiler drive by friction wheel Boilers are locked by hand extendable with 2 automatic timer relays 2 speeds fast and slow Flour dust cover Spiral and tool made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is retracted and extended 400 volt power supply Robust and stable machine Machine is completely repainted Tested for function
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg
Machine vise, sturdy vise, drill vise -Jaws depending on the workpiece geometry: movable -Jaw width: 65 x 87 mm -Clamping depth: max. 15 mm -Weight: 4 kg
Machine vise, sturdy vise, drill vise -Jaw width: 220 x 60 mm -Clamping depth: max. 385 mm -Dimensions: 800/340 / H170 mm -Weight: 94 kg
hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulic machine vice -Jaw width: 125 x 45 mm -Clamping depth: 150 mm -Dimensions: 430/210/H110 mm -Weight: 30.5 kg
Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec
Machine vice, vice, drill press vice -Jaw width: 280 mm -Back height: 150 mm -Clamping depth: max. 470 mm -Dimensions: 920/400/H255 mm -Weight: 152 kg
Machine vise, sturdy vise, drill vise -Jaw width: 210 x 65 mm -Clamping depth: 410 mm -Dimensions: 800/345/H170 mm -Weight: 87 kg
C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Span width: approx. 500 mm -Clamping depth: approx. 200 mm -Dimensions: 650/290/H40 mm -Weight: 5.7 kg
Hydraulic vice, machine vice, hydraulic vice, drilling machine vice -Jaw width: 125 x 45 mm -Clamping depth: 225 mm -Machine vice: rotatable -Dimensions: 430/300/H140 mm -Weight: 44 kg
Inv. Num. : 7381 Type:- Producer: Jorns Generated: Parameters: Maximum sheet thickness when cutting: 3 mm Maximum sheet metal plate width: 1250 mm Max. the weight of the scroll: 6000 kg
Boiler for spiral mixer, Fabr.Kemper SPA 125, manual locking
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 200 x 60 mm -Clamping depth: 250 mm -Dimensions: 520/280/H195 mm -Weight: 73 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 40 mm -Clamping depth: 190 mm -Machine vice: rotatable -Dimensions: 500/380/H170 mm -Weight: 43 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 510 mm -Clamping depth: 345 mm -Dimensions: 650/510/H230 mm -Weight: 91 kg
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 250 x 50 mm -Clamping depth: 290 mm -Dimensions: 540/330/H220 mm -Weight: 70 kg
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 50 mm -Clamping depth: 105 mm -Dimensions: 480/250/H160 mm -Weight: 49 kg
Machine vise, sturdy vise, drill vise -Jaw width: 200/60 mm -Clamping depth: max. 237 mm -Dimensions: 540/195/H150 mm -Weight: 54 kg
Spänex Aspirator with driving device D= 120mm and distributor G&-5134-M3OBQ
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 305 x 50 mm -Clamping depth: max. 270 mm -Machine vice: rotatable -Dimensions: 590/305/H170 mm -Weight: 87 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 150 x 60 mm -Clamping depth: max. 285 mm -centric clamping -Dimensions: 620/275/H135 mm -Weight: 41 kg
Machine vise, sturdy vise, drill vise -Span width: 100 mm -Jaw width: 135 mm -Back height: 40 mm -Dimensions: 400/310/H130 mm -Weight: 34 kg
used
weight: . kg taper MK: . Clamping system The techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 12,000 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice, stable vice, drill vice -Back width: 110 x 30 mm -Tension depth: max 132 mm -Tension: centric -Dimensions: 345/135/H95 mm -Weight: 11.7 kg
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 204 x 42 mm -Clamping depth: max. 180 mm -Dimensions: 480/340/H165 mm -Weight: 55 kg
Machine vise, sturdy vise, drill vise -Jaw width: 213 x 55 mm -Clamping depth: max. 208 mm -Dimensions: 670/240/H140 mm -Weight: 98.5 kg
Machine vise, sturdy vise, drill vise -Span width: 138 mm -Jaw width: 160 mm -Back height: 45 mm -Dimensions: 500/350/H160 mm -Weight: 50 kg
pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -pneumatic hydraulic: machine vice -Jaw width: 160 mm -Back height: 51 mm -Span width: max. 330 mm -Dimensions: 550/200/H125 mm -Weight: 47 kg
pneumatic hydraulic machine vice, hydraulic vice, hydraulic vice, NC power clamp -hydraulics defective -Jaw width: 160 mm -Jaw height: 53 mm -Span width: max. 340 mm -Dimensions: 550/250/H135 mm -Weight: 55 kg
Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg
V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available
Quick clamping device, quick release, quick clamping vice, drilling device, machine vice, drill vice, clamping sleeve, collet -pneumatic collet -Built-in collet: Ø 34 mm -Assembly height without pneumatic cylinder: 208 mm -Dimensions: 410/200/H530 mm -Weight: 34 kg
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg
Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg
Machine vice, vice, drill press vice -Jaw width: 155 mm -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg
Machine vice, vise, drill press vise -Jaw width: 160 mm -Jaw height: 50 mm -Clamping depth: max. 105 mm -Dimensions: 460/163/H123 mm -Weight: 38.3 kg
Hydraulic vise, machine vise, hydraulic vise, high-pressure clamp, hydraulic vise -hydraulic tension defective -sold as a source of spare parts -Jaw width: 160 mm -Jaw height: 53 mm -Span: max. 170 mm -Support height: 80 mm -Weight: 62 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max. 170 mm -swivel -Dimensions: 530/330/H170 mm -Weight: 67 kg
Slotting machine vice, vice for slotting machine -Span width: 110 mm -Jaws: 225 x 45 mm -Dimensions: 270/330/H155 mm -Weight: 20 kg/piece
Switching power supply, control unit, modem, power supply -Type: SPA 15-11810 -Price: per piece -Number: 8 available -Weight: 0.6 kg
Quick release device, quick release, quick release vice, drilling device, machine vice, drill vice -Tensioning sleeve: Ø 9 mm -Dimensions: 180/420/H120 mm -Weight: 5 kg
Machine vice, stable vice, drill press vice -Vice: rotatable -Jaw width: 200 x 55 mm -Clamping depth: max. 170 mm -Dimensions: 600/270/H210mm -Weight: 81 kg
Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: Ø 32 -Clamping sleeves: 4/6/10/12/14 mm -Price/Sale: complete -Total weight: 1 kg
Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg
Machine vise, sturdy vise, drill vise -Machine vice: rotatable -clamping jaws 240 x 60 mm -Clamping depth: 285 mm -Dimensions: 630/315 / H200 mm -Weight: 73 kg
Machine vice, sturdy vice, drill press vice -Machine vice: rotatable -Clamping jaws 200 x 55 mm -Clamping depth: 200 mm -Dimensions: 510/228/H190 mm -Weight: 64 kg
Machine vise, heavy duty vise, drill press vise -Machine vise: rotatable -Clamping jaws 200 x 40 mm -Clamping depth: 300 mm -Dimensions: 630/325/H200 mm -Weight: 82 kg
maximum number of results exceeded
please refine your search
