mta spa used for sale

THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES & SPARE PARTS ARE AVAILABLE FOR PURCHASE: 1x Canon MC-30 Maintenance Cartridge 1x Toner Canon PFI-1700 MBK 1x Toner Canon PFI-1700 PBK 1x Toner Canon PFI-1700 M 1x Toner Canon PFI-1700 PM 1x Toner Canon PFI-1700 PC 1x Toner Canon PFI-1700 Y 1x Toner Canon PFI-1700 GY

The machine is in good technical condition, after prior agreement it is possible to test it. , connected = can be demonstrated in operation. Machine system completely backed up on ext. HDD. Disconnection, reconnection and possibly future service agreed with EDM (exclusive importer and seller)

Key data: 600 mm, 400 mm, 350 mm

For sale Sodick CNC wire EDM machine type ALC 600G. Used CNC wire EDM machine with minimal soot traces. Type ALC600G Premium • With linear motors in X, Y, U and V directions • With Smart Pulse (SP) CNC generator • High-speed wire feeder unit • Smart Linear • Automatic wire feeder in 9 seconds • Triple filtration system •Jumbo 20kg wire roll feeder is standard • Smart control with 19" TFT multi touch screen Technical data machine: Travel X-Y axis: 600 x 400 mm Travel U-V axis: 150 x 150 mm Travel Z-axis: 350 mm Max. workpiece dimensions: 800 x 570 x 310 mm (in a water bath) 800 x 570 x 340 mm (coaxial flushing) Working tank dimensions: 1050 x 710 mm Max. workpiece weight: 1000 kg Distance between floor and top of the table: 995 mm Controlled axes: 5 (X, Y, Z, U, V) Max. positioning speed m/min: 2.0 Wire diameter ø: 0.1–0.3 mm (optionally 0 ...

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

1 lot of retaining rings for exterior and interior, 1 lot of cylindrical pins and taper pins, approx. 30 kg 1 lot of shaft seals

Spare Parts for Printers and Thermoformers Consisting of :- GABLER 702/703 Complete Control Cabinet ILLIG VHW 72 Infeed Adjustment VAN DAM Vane Vacuum Pump Norgren Plugassist Cylinder Skeletal Waste Material Winder 20 x ILLIG RDM 70K Mold Parts for 68mm PP Cups 1 x Plastic Crate Polytype DDM 300 Spare Parts 2 x VAN DAM Goose Neck Cup Feeder, 1 x Inclined Conveyor Cup Feeder 8 x Plate Cylinder Assembley Polytype BDM 301R

A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554.  ...

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor N181, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

AS/RS, TGW with 2xMustang RBG's, 22,756 parking spaces, box size 60x 40x 35cm – used - : Price from location: only 99.500.-€ (net), plus dismantling etc.! Manufacturer: TGW Type: AS/RS, Year of Make: 2011 Device type: Mustang stacker crane Number of stacker cranes: 3 pieces Lanes: 3 Dimensions of the system: length x width x height: 64 x 13 x 7.90m Storage locations: 22,756 pieces Payload: 50kg/crate Load units (dimensions max.): 600 mm x 400 mm x 350 mm Double-deep storage Condition: good Available: immediately Location: Würzburg area Plan is available as DWG – also further technical descriptions Stacker crane Mustang Basic unit: The Mustang single-mast storage and retrieval machine is used for automatic loading and retrieval Retrieval of containers to a high-bay or flow warehouse. This storage system can also be used to feed workstations in assembl ...

Key data: 500 mm, 400 mm

Roboform 350 + Erowa Robot Compackt 44-Fold Electrode Changer This die-sinking EDM machine offers precise machining with a wide range of features. Details: Year 2006 Travels: X/Y/Z 350 x 250 x 300 mm Minimum power consumption: 5 kVA Maximum electrode weight: 25 kg Accessories: incl. Erowa zero-point clamping system on table WITHOUT electrode holder

Key data: 1770 A, 1220 , 70

The OPS INGERSOLL EDM machine GANTRY 1200 HSJ / 64 bit, built in 2006, has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts have been carefully checked. The following overhaul work was carried out on the above-mentioned machine: Replacement of ball screw and ball bearings of the X, Y and Z axis. Replacement of all (4) ball screws of the tank drive. Inspection and test of the C-axis for tightness and accuracy Geometric verification of all axes according to OPS INGERSOLL protocol. Basic cleaning of the complete machine base. Cleaning of the complete working tank including replacement of the felt scrapers. Complete painting of the machine. Overhaul of the dielectric pumps. Replacemen ...

Key data: 750 mm, 650 mm, 60 A

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

D-65 diesel engine, which is installed on YuMZ-6 tractors Engine type: 4-cylinder diesel piston internal combustion engine. Power: 40 to 62 horsepower (29.6 to 45.6 kW). Displacement: about 4.94 liters. There are also other engines from tractors and trucks of Soviet production

ALTAY V6 Type: Diesel Engine. Configuration: V-shaped, 6-cylinder. There are also other engines from tractors and trucks of Soviet production

Type: Diesel Engine. The engine is equipped with a turbocharger. There are also other engines from tractors and trucks of Soviet production

2 x die-sinking EDM machines Maho Hansen HS 350 E and HS 300E built in 1990

Wire EDM machine Fanuc alpha IB BJ 2002

Various spare parts for capsule filling machine BOSCH, type GKF1500.

Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde

Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...

Offer 12pcs. Spark Plug Plug with the Part. 578731 for sale. 1piece is defective above, see photos.

Several spare parts for Corazza FD220L machines existing out of:, - Cams., - Holders., - Guiding plates., - Bushes., - Axles., - Toothwheels., Type of Machine: Yeast / Butter Packaging Machine, Dimensions: Box 80 x 60 x 60 cm, Weight: 140 kg

Die-sinking EDM machine Manufacturer: Exeron Type: 312 Year of Make: 2004 Control MF10 Travel paths X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working container: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece weight: 800 kg Filling height work basin: 300 mm 20-fold tool changer Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/ H approx.: 1,910 x 1,798 x 2,300 mm

Hello, for sale is a very good used wire EDM machine of the brand Fanuc Robocut Alpha C400iC. The EDM machine has only 3288 operating hours and is from the year 12/2021. The Fanuc is still energized and is available at short notice. Prior sale and errors excepted.

Used Printing Board For Bread / RollsDescriptionManufacturer: bmTECTyp: Printing BoardYear of Construction : 2021See pictures for details.

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

Toe forming machine for shaping and closing the front part of the shoe. Auction-ID: A7-45167-1

Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Ram, rams for an eccentric press, single column press, punching machine, single column eccentric press, eccentric press - single column, press -Spare part: comes from a Weingarten eccentric press -Stroke adjustment: 10-80mm -Plunger area: 320 x 65 mm -Plunger mount: O 40 mm -Plunger adjustment thread: M64 x 6 mm -Plunger adjustment ball head: approx. 92 mm -Dimensions: 875/320/H190 mm -Weight: 164 kg -Pressure unknown

Shot blasting machine, continuous blasting machine, wear plates, blast wheel discs -Spare and wear parts: for shot peening system continuous blasting system -Baffle plates: 02122 V105 7 pieces dimensions 390/125/H145 mm / 11.7 kg/piece. -Baffle plates: C1315 N517 2 pieces dimensions 480/140/H175 mm / 15 kg/piece. -Spinning wheel discs: 02122 V105 16 pieces, dimensions 350 x 80 mm / 112.5 kg/total. -Accelerator gears: 4 pcs. Ø 250 x 320 mm / 27 kg/pc. -Conveyor shafts: 3 pieces Ø 80 x 1640 mm / 40 kg/piece -Shipping/Price: complete -Total weight: 452.4 kg

3 x dosing systems, including 4 x PBS fluid tanks built in 2008 Auction-ID: A1-45447-20

• Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-438

Circulation coins Spain Franco 1x 5 Centesimos, 9x 10 Centesimos, 2x 50 Centesimos, 23x 1 Peseta, 23x 5 Pesetas, 6x 25 Pesetas, 3x 50 Pesetas, total 67 pieces

Circulation coins Spain Football World Cup 1982 9x 1 Peseta, 11x 5 Pesetas, 3x 25 Pesetas, total 23 pieces

Circulation coins Spain Juan Carlos 154x 1 Peseta, 2x 2 Pesetas, 84x 5 Pesetas, 10x 10 Pesetas, 36x 25 Pesetas, 4x 50 Pesetas, 5x 100 Pesetas, 1x 200 Pesetas, total 296 pieces

Circulation coins Spain 5 Centimos 1870 KM662 2 1/2 Centimos 1868 KM634

Circulation coins Spain 1944-1957 10 Centimos 1945, 3x 50 Centimos 1949, 2x 1 Peseta 1944, 5x 1 Peseta, total approx. 11 pieces

Circulation coins Spain Franco 1963-1974 6x 10 Centimos, 4x 50 Centimos, 33x 1 Peseta, 18x 5 Pesetas, 8x 25 Pesetas, 1x 50 Pesetas, PTA 375.60, total approx. 70 pieces

Circulation coins Spain European Football Championship 1980-1982 13x 1 Peseta, 14x 5 Pesetas, 3x 50 Pesetas, PTA 233,-, total approx. 30 pieces

Circulation coins Spain Juan Carlos from 1975 39x 1 Peseta, 76x 5 Pesetas, 1x 10 Pesetas, 23x 25 Pesetas, 2x 50 Pesetas, 3x 100 Pesetas, PTA 1,404,-, total approx. 144 pieces

Collector's Medals Shell Aircraft/ Space 26 pcs.

Circulation coins Spain since 1944 Franco 4x 5 Pesetas, 3x 1 Peseta, Juan Carlos 5x 25 Pesetas, 12x 5 Pesetas, 3x 1 Peseta

SMC ROTARY ACT CRB1BW80-90S-XF , DQ , max press 1.0 mp , 145 psi , Made in Japan Auction-ID: A7-45483-1

Including: Full shelf structure, and various tools ONLY the content of the single span photographed. The contents placed on the OTHER shelves have been placed in another batch. Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-9

FESTO MS4-LR-1/4-D7-AS Pressure Control Valve , Mat No. 529419 , K943 Series Auction-ID: A7-45483-32

Including DENSO robot, POWERMATE control panel, oil reservoir for axis lubrication, air circuit with socket, inverter for left and right spindle, axis drive and time counter buzzer. Transport size: approx. 3 pallets Auction-ID: A7-45181-39

FESTO MS6-LRB-1/2-D7-V5-AZ Pressure Control Venti , 530337 Auction-ID: A7-45483-31