ms maschinenbau used for sale

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS43-12-R -Number: 3x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.3 kg/pc.

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS91-12-R -Number: 1x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.4 kg/pc.

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25 kW -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Design: B14 -Protection class: IP 54 -Number: 2x motor available -Price: per piece -Dimensions: 240/123/H155mm -Weight: 6 kg/pc.

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: forming tool / press tool adapter MST Ø 85 -Receptacle: Ø 40 mm -Receiving thread: M34 -Dimensions: Ø 85 x 160 mm -Weight: 4.5 kg

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 63 mm -Recording: see photos -Total dimensions: Ø 80 x 235 mm -Weight: 3.5 kg

WESTFALIA MSB 60-01-076 MILK SEPARATOR CENTRIFUGE USED FOR MILK SKIMMING, WHEY SKIMMING, CREAM SEPARATION, FAT SEPARATION FEED CAPACITY: 7.000 LT/H MACHINE COMES WITH TOOLS KIT AND SOME SPARE PARTS INSTRUCTIONS BOOKS ARE AVAILABLE 2 PCS AVAILABLE IN STOCK !

sheet width: 3000 mm plate thickness: 3 mm weight of the machine ca.: t 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 7x centering tips available -Price: per piece -Recording: see photos -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: Lenze ABW, face driver -Type: MS4 -Front dimension: Ø 45 mm -Recording: MK4 -Total dimensions: Ø 57 x 178 mm -Weight: 1.4 kg

Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. stroke: 550 mm -max.: 700 bar

Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Offer 23402 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Infinitely variable belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - With: - Saw blade welder IDEAL -Lighting

Globoid gear, indexing, oscillator indexer, index gear, rotary index drive -Manufacturer: CAMCO, index gear -Type: MSHV40A917-Y7A -Overload clutch: 11FC-SD -Shaft: Ø 55x45 / 35x80 / 35x75 mm -Translation: 20 rev. = 90° -Dimensions: 815/720/H585 mm -Weight: 327 kg

Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Pressure regulating valve, pressure regulating directional control valves -Manufacturer: Festo, pressure regulating valve -Type:MS4-LR-1/4-D6-AS -Operating pressure: 0-7 bar -Number: 5 valves available -Price: per piece -Dimensions: 100/85/H120 mm -Weight: 0.4 kg/pc.

Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Stock number: 3919 CNC LATHE Manufacturer: MAZAK, Type: HQR 200 MSY Year of manufacture: 2018 Specifications: Max. circumferential diameter 344 mm dia. Turning length 860 mm Main motor power 22 kw Main spindle speed range 5000 rpm Hole through drawing tube 65 mm dia. C Axles 0.001 Both spindles Y axis upper 100mm / lower 70mm mm Tool turret 1 with 12 stations Tool turret 2 with 12 stations Powered tools. 6000 Both Turrets rpm Control Mazak Smooth Fabr. Accessories: Collet device. Heinbuch 65 both spindles Hydr. Chuck main spindle 210 mm dia Hydr. Chuck Subspindle 210 mm dia Driving angle tools 6 pieces Driving Tools Straight 5 pcs. Tool setter Charging Hydrafeed X-Tract Delivery time September 2024 Length: 4000 mm, Height: 2500 mm, Width: 2700 mm, Weight: 12500 kg

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

Pressure regulating valve, pressure regulating directional control valves -Manufacturer: Festo, pressure regulating valve -Type:MS4-LR-1/4-D7-AS -Operating pressure: 0-12 bar -Number: 7 valves available -Price: per piece -Dimensions: 140/100/H80 mm -Weight: 0.3 kg/pc.

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg

Offer 24157 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 325 mm - Table size 600 x 600 mm - Table tiltable left / right 10° / 45 ° - Table height from the floor approx. 1030 mm - Saw blade length 3450 - 3640 mm - Bandwidth max. 25 mm - Stepless belt speed 15 - 1500 m/min - Drive 400 V / 1.5 kW - Weight approx. 500 kg - Space requirement approx. W 800 x H 1850 x D 1000 mm - with: - Saw blade welder IDEAL -Lighting

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

for sale - MSW Straightening Press for Profiled Iron AM3001 (CH-Make) Handy and very robust screw press for straightening and bending work on profiled iron. Low effort due to large handwheel and three-lane steel spindle. Easy workpiece movement thanks to 2 lateral metal rollers. Force approx. 70,000 N Footprint 700 x 700 mm Table height approx. 1000 mm Wheel diameter 1100 mm Max. prism opening 100 mm Weight approx. 170 kg further models and inquiries to FSA Maschinen AG

A total of 8 pieces available, price per table Pros: - Due to the narrow design of the base, good accessibility of the elements from all sides - Large adjustment range of the contact surface by extending the diamond-shaped pads - Tools and small parts always ready to hand on the shelf on the assembly tables - Support rails optionally covered with rubber, brushes, sliding strips or felt - No cable clutter when using the implement carriers: the machines are always ready to hand at the place of use Equipment: - Work surface covered with profile rubber - Diamond shaped supports in the edge area for placing profiles in the longitudinal direction - Height adjustable 900 – 1,100 mm

Compact slitting line, with uncoiler, loading prism, pressure arm AH 1500/5000 kg, clamping range 480 - 550 mm, with 3 arched tables, with 4 overflow tables, with 2 bases, with 2 stairs, with guillotine shears for cutting to length, foil holder with brake, with 5 pairs of knives Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.0 mm Color: Blue Total power requirement: 3 x 400 V Machine weight: 9100 kg Dimensions: 11541 x 5300 x 1770 mm Coil weight: 5000 kg Straightening rollers: 7 Number of blades: 5 pairs Straightening rollers at the top: 3 Straightening rollers at the bottom: 4 Speed: 35 m/min Machine Number: K08258

Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.

Magnetic coil, electromagnet, traction magnet -Type: MSN1G-24V -Connection: 24 V DC 2.5 W Price: per piece -Number: 14 available Minimum order quantity: 3 pieces -Weight: 0.1 kg

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

Zellschneider photovoltaic solar cells. 5000 whole cells from the front per hour. 10000 half cells from behind per hour

Used roasting/baking oven from Food Design Applications – Ireland Model: MSOG/2-100/800 Burners: Lanemark International Heating power: two burners: 2x 170kW = 340kW It is possible to connect steam. It can also work as a cooler, dehumidifier Two independent zones Electric blow height adjustment Electric blowing force adjustment Electric belt speed control Direct wash possible Indirect heat distribution system (tubular heat exchanger) Lower waste tray Stainless Tape, Braided with Belt Tensioning System Complete stainless steel chimneys, including exhaust gas control fans Natural gas Dimensions: Chamber (tunnel) height (adjustable) max. 250mm Tape width 950mm Belt width – working space 920mm Length of the whole machine 10250mm Baking Length 8000mm Machine width 2030mm Height with motors 3250mm Acid-resistant design.

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, PTC thermistor release device -Manufacturer: Ziehl, PTC relay, PTC release device -Type: MSR 220 KA -Item No.: T 222175 -Quantity: 1 piece available -Dimensions: 115/75/H25 mm -Weight: 0.1 kg

This 4-axis Mazak QTN 250 II MSY was manufactured in 2015. It features a maximum swing diameter of 640 mm and a maximum machining diameter of 380 mm. The machine includes a main spindle with a chuck diameter of 250 mm and a counter spindle with a chuck diameter of 210 mm. If you are looking to get high-quality turning capabilities, consider the Mazak QTN 250 II MSY horizontal turning machine we have for sale. Contact us for further details.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC multi-spindle automatic lathe, make Index, type MS52C2-1, year of manufacture 2004, serial no. 160024 - Robot cell - 7 clamping devices - 3 single-axis rigid tool holders - 3 multiple-axis rigid tool holders - 4 driven tool holders - Büchel extraction system - Stäubli Unimation handling and loading robot cell incl. basket transfer unit with basket stack for raw and finished parts - Two stacked shuttles for feed/removal baskets - Integrated measuring station Commissioning 2021 Connected load 24 kW, Control system, Index, type C200-4D (Siemens 840 D-Base) - 2 control stations - 6 spindles - X/Y travel 300 x 500 mm - Bar diameter max. 52 mm - Spindle speed max. 5000 rpm - 12 tool carriers, coolant system - Industrial robot Stäubli, - Programming panel, - Removal device, - Set-down device, - Accessories, Machine designation: CNC multi-spindle automatic lathe, Machine number: 2420701

Progress MSR 20/6 This MSR 20/6 is a pure straightening and cutting machine without a bending device! - Year of Manufacture: 2015 - Wire Diameter: 8 mm - 20 mm - Straightening Length: 500 mm - 14,000 mm - Rotor Straightening System: Equipped with a feed unit - Automatic Wire Diameter Changeover - Max Feeding Speed: 160 m/min - Stationary Shear - Includes: 6 reels, each with 5-ton coil capacity The 2015 PROGRESS MSR 20/6 is a specialized bending machine used primarily in the construction and manufacturing industries for processing reinforcing steel bars and wire. Manufactured by Progress Maschinen & Automation AG, this model is designed for high efficiency and precision in bending and cutting operations, particularly useful for creating structural reinforcements. Applications The PROGRESS MSR 20/6 is used predominantly in industries where reinforcing steel structures are critical, su ...

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Mahle, screw compressor type MSK G11 -Drive power: 11 kW -Volume flow rate: 1.48 m³/min -Max. pressure: 10 bar -Individual components: see photos -Dimensions: 730/690/H1315 mm -Weight: 291 kg

Deburring machine manufactured in 2008. This Costa LEVIGATRICE MSH3 CCVC 1350 features a working width of 1,350 mm and accommodates workpiece thicknesses ranging from 0.5 to 250 mm. It is equipped with inverter-driven motors, a vacuum system, and belt cleaning blowers. If you are looking to get high-quality deburring capabilities, consider the Costa LEVIGATRICE MSH3 CCVC 1350 machine we have for sale. Contact us for further details.

Westfalia MSD 50 01 076 Milk & Whey separator Application: Fat separation, cream separation, milk skimming, whey skimming Capacity: 5.000 lt per hour feed milk Including tools and stainless steel base frame

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

BÜHLER Differential Weigh Weigher MSDG MEAF-30 Machines No.10366511 up to 12000 kg very good condition