ms maschinenbau used for sale

Key data: 800 mm, 510 mm, 510 mm

Machine Details Stock-No. 1105-03936 Type of machine Machining Center - Vertical Make MORI SEIKI Type SV 50 /40 Year of manufacture 1996 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time MAY 2021 Freight basis EXW (Incoterms 2010) loaded on Technical details x-travel 800 mm y-travel 510 mm Z-Travel 510 mm control MSG 516 number of spindle speeds 10000 Spindle Drive 22/18,5 kW Rapid Travel X/Y/Z 32 mm/min table-size 1320x600 mm tool changing time 0,9 sec tool magazine: 30 BT 40 Raised Column 200 mm total power requirement 51 kW Weight of the machine approx. 6.9 t Accessories Chip conveyor rear discharge 2 Memory 640 m Helical Interpolation Additional information Achine has 2 chip conveyors. CNC MSG 516

Mori Seiki ZL 203 CNC lathe 4 axis live tools Mori Seiki CNC model MSC501 CNC Main spindle nose ASA 6 Main spindle power 11 Kw Chuck 210 mm Main spindle bore 51 mm Turning diameter 510 mm Turning length 752 mm Number of RPM of the main spindle 4000 Number of tool holder turrets 2 Number of tool places first turret 12 Number of live tools first turret 12 First turret X-axis travel 235 mm Z axis travel first turret 520 mm Number of second turret tool places 8 Number of fixed tool places for the second turret 8 Second turret X-axis travel 175 mm Second turret Z-axis travel 490 mm Linear axis rapid feeds X Y Z 24 m/min Tailstock yes Automatic positioning Presetting yes Number of live tool holders supplied 7 Number of fixed tool holders supplied 28 2003, Mimu machine tools Italy

Post Brass round bar, round profile PAGUS Ø approx. 3 to 26 mm MS58 and MS63 length up to approx. 1600 mm approx. 60 kg Dimensions: 1700 x 300 x 200 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 65000 € : 1300 € : 35 to : 500 mm : 800x500 mm : 600 mm : 125 mm/s : 9 mm/s : 68 mm/s : 4 kW : 1100 mm : 1100 mm : 2300 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Post Brass tubes, round grooved, square and hexagonal PAGUS tubes Ø approx. 3 to 20 mm round grooved Ø approx. 8 up to 18 mm square and hexagonal MS58 and MS63 length up to approx. 1000 mm approx. 74 kg Dimensions: 1100 x 300 x 200 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 71300 € : 1426 € : 60 to : 500 mm : 800x500 mm : 600 mm : 120 mm/s : 8 mm/s : 58 mm/s : 5.5 kW : 1100 mm : 1100 mm : 2350 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Solenoid, Electromagnet MAGNET-SCHULZ G TC A 80 GTCA080L40DC1 MSM 2072409 Rod diameter: Ø 10 mm stroke: 20 mm 48 V DC new Dimensions: 120 x 80 x 120 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 78000 € : 1560 € : 85 to : 500 mm : 900x600 mm : 600 mm : 105 mm/s : 7 mm/s : 58 mm/s : 7.5 kW : 2250 mm : 1150 mm : 2400 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 104000 € : 125 to : 500 mm : 1200x700 mm : 600 mm : 115 mm/s : 7 mm/s : 70 mm/s : 15 kW : 2550 mm : 1500 mm : 2600 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 123000 € : 170 to : 500 mm : 1200x700 mm : 600 mm : 110 mm/s : 7 mm/s : 70 mm/s : 19 kW : 2700 mm : 1600 mm : 2650 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor roller, drive roller, conveyor belt motor, drum motor, electric belt drum BDL MASCHINENBAUGESELLSCHAFT Type 215S Drum diameter: Ø 225 mm Drum length: 750 mm Motor : 2,,2 kW 230 / 400 V 3AC 50 Hz Belt speed: 0.50 m/s Shaft diameter: Ø 40 mm Wavelength: 35 mm used, tested ! Dimensions: 930 x 225 x 225 mm

1-shaft ripper. Brand: Silmisa, model: MSA 630, cutting chamber: 700x630 mm, motor: 45 Kw (60 hp), rotor width: 630 mm, rotor diameter: 400 mm, year: 2004. With electrical panel with touch screen.

Control solenoid, electromagnet, with feedback magnet - Schultz GHUZ 050 H43 D05 ( GHUZ050H43D05 ) MSM 7/62912 24 V DC Flange: 60 x 60 mm bolt circle diameter: Ø 68 mm, 4x bore: Ø 4,3 mm used, tested ! Dimensions: 145 x 60 x 105 mm

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 1x available -Weight: 1 kg

Angle polisher, angle buffing machine, angle grinder, angle drill -Power: 650 watts -Take: Ø 26 mm MK1 -Max. Width: 30mm -Dimensions: 570/240/H120 mm -Weight: 6 kg

Directional control valve, solenoid valve BÜRKERT 200-A-2,4-B MSG1/8-E-303 061014K G 1/8 Pn: 0 - 6 bar 220 V AC 4 W New ! Dimensions: 40 x 20 x 45 mm

Short-stroke heavy-duty cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders -with external thread: M 90 x 2 -Piston: Ø 55 mm -Max. Stroke: 550 mm -max.: 700 bar

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 2 C/O unused in original packaging -Article number: 2.430.810.93 -Voltage: max. 250 V / A1/A2: AC/DC 24V -Quantity: 19x relays available -Price per piece -Dimensions packaging: 80/25/H100 mm -Weight: 0.1 kg/pc.

Plastic diaphragm valve, pneumatically actuated VENTIL- und MSR-TECHNIK Product no.: 401942 + 402435 + 400835 DN50 PN10 Installation dimensions: 185 mm Position sensor: GEMÜ 1231 Valve body material: PP Diaphragm material: FPM 4x threaded bore: M8 x 1.25 hole spacing: 45 mm New ! Dimensions: 245 x 145 x 390 mm

Limit signal generator, logic controller, trip point control, multisafe switching amplifier, level monitor, signal isolator, isolation amplifier, isolation amplifier -Manufacturer: Turck, multi safe signal isolator isolation amplifier -Type: MS91-12-R -Quantity: 1x module available -Dimension: 115/50/H75 mm -Weight: 0.4 kg

Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Manufacturer: ABS, universal pressure vessel steel from tray sealing machine Inauen VC999/ TS 1200 N -Type: MS190420 -Content: 13.5 l -Dimensions: 435/195/H255 mm -Weight: 3.4 kg

Three-phase motor, electric motor -Manufacturer: Lafert, electric motor type MS63/4 -Power: 0.25kw -Speed: 1370 rpm -Shaft: Ø 14 x 40 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 240/123/H155 mm -Weight: 6 kg

Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor, motor protection, monitoring relay, thermistor -Manufacturer: Schiele, motor protection relay MSS mecotron 1 C/O unused original packaging -Item no.: 2.430.801.11 -Voltage: 220- 240V AC -Number: 2x relay available -Price per piece -Dimensions packaging: 100/80/H25 mm -Weight: 0.2 kg

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS91-12-R -Number: 1x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.4 kg/pc.

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Control Solenoid, Electromagnet MSM, MAGNET-SCHULZ MEMMINGEN GAAY035F43D37 228383 Stroke: 7 mm 12 V DC Guide sleeve: Ø 24 mm Flange: 35 x 35 mm New ! Dimensions: 100 x 35 x 60 mm

Measuring transducers, power measuring transducers, active power measuring transducers, analogue converters, frequency/analogue converters, frequency dividers, isolating converters, signal converters, isolating converters, switching amplifiers -Manufacturer: Turck, multi safe switching amplifier Switching Amplifier -Type: MS13-22ExO-T -Dimension box: 130/60/H80 mm -Weight: 0.4 kg

Limit value signaller, logic controller, trigger point control, multisafe switching amplifier -Manufacturer: Turck, multi safe limit value signal generator ovp -Type: MS43-12-R -Number: 3x module available -Price per piece -Dimension box: 130/60(H80 mm -Weight: 0.3 kg/pc.

Vacuum pump, rotary vane vacuum pump BUSCH R5 RA 0100 F 503 ( R5RA0100F503 ) Pabs.: 0,1 hPa ( 0.1 mbar ) Connections: 1 1/4 ( inches ) Motor: MS2 100L1-4 B14 2.2 kW 1445 rpm 230 / 400 V 3AC 50 Hz IP55 used, tested ! Dimensions: 760 x 410 x 440 mm

Solenoid coil, stop magnet, pull magnet, opening magnet, stop magnet, locking unit, solenoid valve coil -Manufacturer: Parker, solenoid valve coil Solenoid coil unused -Type: AK-D3W-S-SW-30-610 MSM-H1 -Voltage: 48VDC -Number: 5x magnetic coil available -Price per piece -Dimension: 90/62/H72 mm -Weight: 1.0 kg

Vacuum pump, rotary vane vacuum pump BUSCH R5 RA 0100 F 503 ( R5RA0100F503 ) Pabs.: 0,1 hPa ( 0.1 mbar ) Connections: 1 1/4 ( inches ) Motor: MS2 100L1-4 B14 2.2 kW 1445 rpm 230 / 400 V 3AC 50 Hz IP55 used, tested ! Dimensions: 700 x 410 x 470 mm

Vacuum pump, rotary vane vacuum pump BUSCH R5 RA 0100 F 503 ( R5RA0100F503 ) Pabs.: 0,1 hPa ( 0.1 mbar ) Connections: 1 1/4 ( inches ) Motor: MS2 100L B14-180 3.0 kW 1425 rpm 230 / 400 V 3AC 50 Hz IP55 used, tested ! Dimensions: 760 x 410 x 430 mm

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver 8 pieces -Type: MS4 / Rapid4 -Intake: MK4 -Forehead dimensions: 6x Ø 46 mm / 1x Ø 40 mm / 1x Ø 30 mm -Price per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver 10 pieces -Type: MS2 / MS2a -Intake: MK2 -Number: front dimension 5x Ø 22 mm / 1x Ø 8 mm / 4x Ø 25 mm -Price per piece

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver 4 pieces -Type: MS3 -Intake: MK3 -Forehead dimensions: 1x Ø 22 mm / 3x Ø 32 mm -Price per piece

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve -Manufacturer: Festo, pneumatic valve on-off valve orig -Type: HEE-D-MIDI-24 Mat. no. 172959 U743 series -Working pressure: 2.5 - 16 bar -Magnetic coil: Festo MSEB-3-24V -Number: 2x valve available -Price per piece -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg/pc.

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

Filter control valve, on-off valve, service unit, water separator, filter bowl, pneumatic filter, filter regulator, service unit combination -Manufacturer: Festo, maintenance unit with pressure sensor/switch, branching modules and filter -Pressure sensor: Type MS4-LFR-1/4-D6-ERM-AD1-AS -Pressure switch: type PEV-1/4-B-OD -Branch modules: Type MS4-FRM-1/4 -Individual components: see photos -Dimensions: 170/85/H220 mm -Weight: 1 kg

Hydraulic clamshell grabs, hydraulic rotary grabs, shell grabs, hydraulic grabs -Blade width: 400 mm -Opening width: 1250 mm -Total height: 1580mm -Equipment: Lehnhoff quick-change mount, rotary servo, -Locating bolt: Ø 40 mm -Internal dimension: 155 mm -Dimensions: 1250/400/H1580 mm -Weight: 340kg

turning diameter: max. 320 mm turning length: max. 810 mm control: MSX 701 IV / MAPPS IV greates pass round over bed: 800 mm Swing dia. over traverse guideway: 800 mm distance between spindles: 1.130 mm standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 5.000 min/-1 power capacity - main spindel: 25 / 22 kW max. Torque: 358 Nm spindle diameter in front bearing: 120 mm spindle bore: 73 mm Bar feed: max. 65 mm C-Axis: 0,001 ° spindle nose: JIS A2-6 Subspindel:: Number of revolutions: max. 5.000 min/-1 power capacity - Sub spindle: 25 / 22 kW max. Torque: 358 Nm spindle diameter in front bearing: 120 mm spindle bore: 73 mm Bar feed: 65 mm C-Axis: 0,001 ° spindle nose: JIS A2-6 chucking diameter: 210 mm Turret 1:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tool stations: max. 6.000 min -1 power capacity - driven ...

Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Holder: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9kg

Key data: 5 , 300 mm, 200 mm

Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg

Horizontal machining center Mori Seiki SH 630 ::SPECIFICATIONS::: CNC Model: Mori Seiki - CNC version: MSC - 516 - Tool connection: iso 50 - Spindle power: 30Kw - Number of spindle revolutions: 10000 Number of tools: 60 - X Axis Stroke: 840mm - Y Axis Stroke: 760mm - Z Axis Stroke: 840mm Rapid feeds linear axes X Y Z: 50m/min Pallet size: 630x630mm Pallet type: indexed Pallet degrees: 1 Maximum load allowed: 1200Kg High cooling pressure: yes System with external tank with filter: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 5537mm Width: 3172mm Height: 3205mm Weight: 18500Kg

Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

MIG/MAG hose package -Dinse: DIX MSZ 2-304 -Length: 3.0 m -Dinse: plug -Water cooled -Weight: 2.8 kg

Angle grinder, cutoff grinder -Grinding wheels: Ø 125 mm -Power: 600 W -Speed: 8500 rpm -Price: per piece -Number: 5 pieces -Dimensions: 280/70/H120 mm -Weight: 2.7 kg/piece

Condition: well-maintained / fully functional Power supply: 220 V, 50-60 Hz Internal power supply: 24 V DC Compressed air: 6 bar Machine weight: 205 kg (net) Machine dimensions (WxDxH): 850 x 780 x 1440 mm Outer diameter (film roll): max. 160 mm Core diameter (film roll): 70 mm Film thickness (with good film quality): 0.010 mm Film thickness (for sharp-edged shapes): 0.012 mm Foil width: depending on the shape of the praline - 1 set of truffle chocolates - 1 format set for dome chocolates - 1Format set for chocolate hearts (6g relief)

Towing trolleys, cable trolleys, conductor rails and accessories, pantographs, cable trolleys, busbars, pantographs, bridge cranes, hall cranes -Cable trolley for: flat cable -Type: MS1F125-50-G-PM-K -Plastic bag with: 3 pieces -Price: complete -Dimensions: 200/200/H100 mm -Weight: 0.4 kg

Digital scale for press brake, edging bench, guillotine shears ... Glass scale, glass measuring stick, rule, digital display, measuring stick, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -from: Hammerle AP 100 press brake -Length unit: 420 mm -Number: 2x available -Price: complete -Dimensions: 550/80/H40 mm -Weight: 4.4 kg