128,836 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
ID3129 MRS 6,8 cbm grapple 6.8 cbm MRS hydraulic grab 6.8 cbm MRS Hydraulic Grab
Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm
Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!
TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor-Zweischalen-UW-Baggergraber Type: 2.5. Year of construction: 2014 Content: 3.5 m³ (at 20° bulk cone) Net weight: 4.900 kg Min. crane eligibility: 11.900 kg Closing time/opening time: 14.5 s / 8.0 s Required rope diameter: 22 - 24 mm Voltage/frequency/current consumption: 400V/50Hz/70 A Motor power: 37.5 kW Oil volume: 200 l Dredging depth under water: max. 100 m SPECIFIC COMMENT - Last revision 2020 - Degree of wear at approx. 50%
ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)
TECHNICAL SPECIFICATIONS Manufacturer: MRS Greifer- und Maschinenbau Designation: Motor Double-Shell UW Excavator Grab Type: 5.5 Content: 5.5 m³ Year of Make: 2000 Net weight: 7,500 kg
TECHNICAL SPECIFICATIONS Manufacturer: MRS Description: Motorized clamshell grab with electro-hydraulic drive Type: Hydraulic Year of Make: 2006 Content: 6.8 cbm Net weight: 10,000 kg Flat bulk density: 2.0 t/cbm Dump cone: 20° Closing time: 19.0 sec. Opening time: 10.0 sec. Hydraulic pressure "close": 240 bar Hydraulic pressure "open": 180 bar Electric motor: 55 kW Transport dimensions (length/width/height): 4,400 x 2,000 x 3,930 mm
ID3774 MRS 8 cbm – Motorised two-shell grab year/Baujahr 1998 6.5 t 8 cbm Motorised two-shell grab with electro-hydraulic drive 8 cbm Engine Clamshell Grab with Electro-Hydraulic Drive
2x heads, 15 colors, approx. 1 year old, rarely used; since production has been outsourced, it must be bought out of the existing lease agreement. The model is the MRT 1502-7S. It can embroider 15 colors simultaneously using two embroidery heads. All software is included, as well as embroidery hoops (magnetic and for caps). A heat press is also available for transferring the embroidery designs onto clothing. Find more here - / Contact us at -
Load capacity up to 12,000 kg Grab content from 1 m 3 up to 10 m³ Make: all reputable manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
Load capacity up to 25,000 kg Grab content from 0.5 m² up to 4 m² Make: various renowned manufacturers workshop testing 2015 Fully functional workshop overhaul and paint renewal upon request.
diameter range 5-13 mm cutting length 2000 mm speed - meters/min 21 - 90
dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/4.um.fp/D92.160/161 -Dimensions: 265/145/H145 mm -Weight: 3 kg
Panel-mounted measuring instrument, panel-mounted measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring instrument, control panel, temperature measuring device -with: Measurement and control technology type M19 -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg
YASNAC MRC robot teach pendant with integrated emergency stop button and control keypad. Includes connection cable and industrial connector. Used condition, shows normal cosmetic wear. Suitable for Yaskawa robot systems with MRC controller. Auction-ID: A7-46756-519
Machine Control SIEMENS D200/30 Mreq - GcK6 U30/2A ( D200/30Mreq-GcK6U30/2A ) 6 RA 2618 - 60 U30-1A ( 6RA2618-60U30-1A ) Input: 380 V Output: 220 V Dimensions: 460 x 300 x 240 mm
Solenoid valve, directional control valve, hydraulic valve TOS HYDRAULIKA VRACHLABI MRPS2 4204 80A 00 ( MRPS2420480A00 ) Pn: 25 MPa ( 250 bar ) Control solenoid: MEPS 2 24 V DC New ! Dimensions: 140 x 36 x 62 mm
Equipped with weighing device and turntable Auction-ID: A1-41277-44
Product Details ZUCCHINI BUSBAR TRUNKING SYSTEMS Complete energy distribution system from 25 to 5000A, from the transformer to the lighting fixtures, by prefabricated busbar trunking systems. The advantages of busbar trunking systems 1 Great flexibility in buildings 2 Quick to Install 3 For currents from 25 to 5000A, solutions Customized with the LB, MS, MR and SCP series 4 Good electromagnetic properties 5 Sustainable, Fully Recyclable Product 6 Compact design
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-46642-40
Mini chassis height: 400mm (2 plugs) Maximum chassis height: 2,800mm (5 plugs) Maxi without filing: 3,000mm Mini frame width: 400mm Maximum chassis width: 3,000mm Pneumatic power: 6 Bar Capacity / Performance: 1 sash / 4 60s plugs 2 Sick C2000 Light Curtains The plugging machine has a tilting entry table 4200 x 2200 mm WARNING: lot under allocation Auction-ID: A1-47012-6
Drilling for tilt and turn Capacity / Performance: 3 45 s plugs / 4 55 s plugs / 5 65 s plugs Drilling and screwdriving 3 screw loaders Inlet and outlet conveyor included Warning: lot under allocation Quotation for dismantling and loading only on request Auction-ID: A1-47012-5
Ball-bearing linear guide with 2 carriages, MR55-A2-1244-22-22-G1-V3-GP, Schneeberger, as good as new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, has been in stock for some time, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws, synchronous motors and linear guides in different designs. Take a look at our website of IPV GmbH. Linear guide with ball chain type MR55-A2-1244-22-22-G1-V3-GP of Schneeberger consisting of: -1 guide rail 55mm x 1244mm long - 2 pcs. guide car MR55-A2 Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we ...
we offer for MRI-use... Medrad MRI Dual-Head-Injector Typ: Spectris incl. TESTING FROM OEM Technican - Injector Head PEDESTAL unit - Head control unit - optical Transmitter/Receiver - Display control unit - Master control unit - Operation manual...englisch language - cable/etc. fully tested from OEM technican YOU ARE WELCOME TO INSPECT
1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,
Manufacturer: Alfa Laval, Model: MRPX214 TGV-74, Function:Whey separator/ Cream separator, Capacity: 10,000- 12.500 Litres/ Hour, Motor power:15 kW, Electrics: 380V/ 50 Hz/ 3 Phase, Bowl speed: 1450 rpm, Tools, Base PlateNew, Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK, Manufacturer: Alfa Laval, Model: MRPX214 TGV-74, Function: Whey separator/ Cream separator, Capacity: 10,000- 12.500 Litres/ Hour, Motor power: 15 kW, Bowl speed: 1450 rpm, Service Spare Parts: Dairy Machinery UK
This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine.
Main shaft for an Alfa Laval MRPX 214 TGV or MRPX 413 SGV Separator., Type of Machine: Main Shaft, Drive line: 50 Hz
AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...
Hydraulic radial engine Manufacturer Denison/Calzoni Type MR300D - F1N1N2S2NX 0401 / 46529, 742056 250 bar Used from Husky injection moulding machine type GL225 RS60/50
Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538
Forklift High level order picker Brand: YALLE MR14 LIFTING CAPACITY: 1400KG SIDE MOVE:YES HEIGHT OF TOP LIFT: 2700MM MAX LIFTING: 6400MM TRIPLEX
Ingersoll Rand Man Rider Winch available for sale. Make: Ingersoll Rand Man Rider winch Model Number: FA51-MR24MK1G/06144 Serial Number: A015878 Year: 2010 Man Lift SWL: 6875 lb at 75 fpm at top layer Utility SWL: 11000 lb at 54 fpm at top layer Press: 90psig FLOW: 700 ROPE DIA: 3/4INCH Drum Size in: 15 Barrel Dia: 27 Flange Dia: 24Lgth
Alfa-Laval liquidring pump. MR200. 7.5 KW. Only 1 more available Fully tested, excellent condition
The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.
Used decanter made by Alfa Laval model MRNX-414B-31G. New 1984. Drum diameter 1900/232 mm. Max sludge density 1.8 Kg/dm3. Drum speed 5000 rpm. Performance 8000 -10000 / h. - Drum length 1900 mm / 353 mm diameter - Max liquid density 1.8 kg / dm3 - Max speed 5000 rpm drum Technical documentation available.
Siemens Simoreg 6RA2287-4DV62-0 D400/850 Mreq-GdGF4V62-3A Feldversorgung/field Supply
Electric motor, three-phase motor -Manufacturer: Verhagen, electric motor type MR56B4 -Power: 0.09kw -Speed: 1325 rpm -Shaft: Ø 20 x 50 mm -Construction: B14 -Protection class: IP 55 -Dimensions: 200/114/H150 mm -Weight: 3.9 kg
maximum number of results exceeded
please refine your search
100 € 
