mp used for sale

Air dryer suitable for 7,5kW compressors. Designed for use with Aflatek Screw10A and Screw10A-200 compressors. Technical data: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Air dryer suitable for 15kW compressor. Designed for use with Aflatek Screw20A compressor. Technical specifications: Air Flow 1.5 m3 / min Dew Point 2 - 10 °C Inlet/Outlet diameter G-1'' Power 0,6 kW Matched Air Compressor power kW 7,5 Weight 45 kg Inlet temperature 45 °C Presure 0,8 Mpa Cooler R 134 Current 3 A Size 730x420x720 mm -Price is with VAT 21% included. Contact us if you need a VAT free offer. -For shipping costs contact us directly.

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

377mm x 12mm HF Pipe Mill Round Size: 165mm – 327mm, Square: 100mm – 300mm, Wall Thickness: 4mm – 12.7mm, Pipe Length: 6m – 12m, Coil ID: 610mm – 760mm, Coil OD: 1100mm – 2000mm, Coil Weight: 25ton, Strip Width: 400mm – 1200mm, Speed: 10 – 35 mpm. Entry Coil Car, Mandrel Uncoiler, Pinch Rolls, Coil Straightener, Horizontal Accumulator, Guiding. Rolls, Forming Mill with DC Drive, Welding Section, 800Kw High Frequency Welder, Water Cooling Section, Sizing Mill, Driven Turk-Heads, Flying Cut-Off, Run-Out Table. Electrics, Hydraulics, Controls

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

Piston compressor make Harzer Kompressorenwerke type AHS 1-40 / 70 VFabr. -No: 501530 Year 1980Power: 1.2 MPa ÜPower: 10 m3 / hEngine power: 2.29 kWWeight approx: 95 kgWith:- Unit built on a horizontal boilerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Electric chain hoist make STAHL type R 6/600Masch. -No: 3544260 Year 1971Load capacity: 600 kgLifting height: 3.0 mPower: 0.44 kWWith- fine lift- Roller chassis- chain memoryused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile work platform make EIFEL type E III 1Fabr. -No: 7102 built in 1979Payload: 300 kgLifting height: 7.2 mWorking height approx.: 9,0 mPlatform size: 1000 x 1200 mmStand area: 1700 x 1100 mmEngine power: 1.5 kWTotal length chassis: 2750 mmWeight approx.: 680 kgused..Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic punch pliers make ECKOLD type ML 10/25Make -No: 1389/2657, year of construction 1993designed and coordinated for re-punching the bent sheet metal overhangson air duct flangesTechnical specifications:punch pliers:Max. pressing force: 3 Mpdesigned for hole diameter: 9.5 mm in 1.0 mm VAhorizontal tool throat: 25 mmused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Igs chips collector make IGS type 22.00Machine -No: 2200983248 built in 1998Technical specifications:Polybag size: 200 lSuction hose size: NW 100 x 3.0 mPower connection: 220 V / 50 HzPower: 2.0 kWExternal dimensions approx.: 970 x 610 x 1860 mmsuitable for foam residues and wastealso for bio eco vp chipslittle used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...

Very nice model of a:Friction wheel forging press make BERRENBERG type RSSP 280/800Technical data from the original:Spindle diameter: 280 mmPressing force: 800 MPMaximum force: 1600 MPWorking capacity: 7000 MPMax. Stroke rate: 40 H / min.Size of the model approx: 420 x 260 x 540 mmSize of the original approx: 4200 x 2600 x 5400 mmMade by a training workshop in support of the sale of such a machine in the Soviet Union.Price on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal straightening machine make SCHULZ type HPR / PR 160 MPMachine -No: 54471 Year 1977Max. Printing capacity: 160 tOperating pressure: 280 barRam stroke: 650 mmPlunger surface: 1000 x 200 mmTable surface: 1000 x 650 mmDrive power: 55 kWWeight approx: 10tWith- Press pressure setting- clamping pressure adjustment- 2 two-handed outlets movable- adjustable / limited stroke lengthsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Butt Welding Machine Fabr. IDEAL Type AS 5Built in 1977Rated power at 50% ED: 30 kVAConnected load: 35 kVAPower setting above: 10 levelsOpen circuit voltage: 3.5 - 7 Vhighest compression force: 1.4 MPMax. Butt welding performance: 400 mm2Protection: 100 AExternal dimensions: 1150 x 1600 x 1400 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Technological data: Capacity: • 0.15l, 0.25l 65,000 cans/hour • 0.33l 50,000 cans/hour • 0.5l 37,000 cans/hour Year of construction 2014 Filling and packaging technology 1. Container pusher PRESSANT UNIVERSAL 1A 2. Empty can inspector CANTRONIC 709 D 3. Can filling machine VOLUMETIC VODM-C2.160-72-94 4. Control equipment CHECKMAT731 FM 5. Foam cleaning 6. Disposable packaging machine VARIOPAC PRO TFS-9 7. Pallet loader MODULPAL 1ADR 8. Pasteurizer LINAFLEX LC23.6-523-31 9. Container transport SYNCO S 10. Control equipment CHECKMAT 731 FM-X 11. Container transport MULTICO S 12. Pallet transport PALCO S – Loader division 13. Pallet transport PALCO S – area pusher Technology 14. Beverage processing technology CONTIFLOW 30 / 6. 15. CIP system VARIOCLEAN AUT-5,000L, 30 m3/hour Information technology and communication technology 16. Network/Hardware Technology 17. LDS (product ...

Oto mills 127mm x 5mm HF Tube Mill with Packaging Line Make: Oto Mills Year New: 2000 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Material Strength: 360 – 510 MPa Tooling: 17 sets, Round, Square, Rectangular Entry Coil Car Floor Standing V-Type Design Powered Traverse & Lift Mandrel Uncoiler Powered Expansion Powered Hold – Down Roll Sliding Base Feed-Up Motor Shear & End Welder TIG Power Supply Mechanical Shear Driven Pinch Rolls Coil Straightening Machine Horizontal Accumulator Entry & Exit Pinch Rolls Coil Feeding Unit Variable Speed Drive Forming Mill Shaft Diameter: 80mm Eight (8) Forming Stands Seven (7) Side Forming Stands Horizontal & Vertical Stand Adjustment Individual Gear Boxes Universal Drive Variable Speed DC Motor Drive 300Kw High Frequency Welder 3-Roll Adj ...

Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,600 mm load per pair of trusses 3,200 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting

Technical data for the pallet rack traverse: Shelving system: Nedcon Type: NS Included in delivery are: 01x pallet rack traverse, new Material colour: RAL 2008 light rotor gun Box profile: 130 x 50 mm Truss type: CC1305015A Steel quality: 275 MPa Agraffe type: PR2-5HK90 Clear width: 3,300 mm load per pair of trusses 3,500 kg at the same. distributed load 02x safety pins, new Version: kompl. galvanized To secure the longitudinal members against unintentional lifting

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Rated power at 50%ED: 35kVA Short circuit current: 11kA Electrode power: 200daN/EH Projection: 800mm --- Control: MPS 10 (5 times, 8 program) --- incl. - Pipe arm - Foot switch - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Cherry and plum pitting machine Model: MPB for easy pitting Processing power approx. 35-190kg/h depending on fruit and size Tabletop unit with handwheel with circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and tested with 6 months warranty only on spare parts! Option: Cherry plate Kirschentsteiner

Cherry and plum pitting machine Model: MPB - A for easy pitting Processing power approx. 35-190kg/h depending on fruit and size Tabletop unit with handwheel without circuit breaker DGUV V3 tested Connection 400V, 500Watt, 16A-CEE plug Dimensions: 465 x 410 x 480 mm, WxDxH Used machine cleaned and tested with 3 months warranty Option: Cherry plate Kirschentsteiner

Matthews Matthews Marking Systems Marking Printer or Marking Printer Type144907.01 Lite Controller MPERIA Control Supplied with ink and thinner The device was used to print bags in a mill CE compliant Very good condition

GeneralHorizontal Machining Centre in travelling column construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical100000/100000/100000 mm/minRapid traverse longitudinal/transverse/vertical100/100/100 m/minWorking area 1Longitudinal630 mmCross800 mmVertical750 mmIntegrated motor spindle speedMASTER®Drive power (100% DC) 30 kWDrive power (40% DC) 46 kWTorque (100% DC) 130 NmTorque (40% DC) 200 NmSpeed range - 15000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 400 kg / 882 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z - axis 630 x 800 x 750 mm/24.8 x 31.5 x 29.5 in axis kinematics A / B (basic machine without NC rotaryClamping hydraulics 2/4 channels f. working tabl ...

roughness meter, Contour measuring device Manufacturer: Hommel Type: T 8000 Year of construction: 2005 Specification: DIN EN ISO 4287 Ra, Rz, RmaxRSm

Horizontal drill rig, with rods on low-loaders and trucks with swivel wall boxes. Tracto Technik GRUNDODRILL 15XP complete train approx. 180m poles DB 2546 L 6x2 MP3, 467.000km Tandem low-loader trailer Complete train from 2009 ! Vehicle may be covered with advertising, labeling and/or labeling residues. Our offer is generally without new HU/AU/SP acceptance. On request, we will be happy to make you an offer from our partner workshops. Errors, typing errors and prior sale excepted. Please do not hesitate to contact us.

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. The device is designed to work independently in line, for glass and plastic bottles with different capacity. Depalletizer DNB-2022 consists of four components: 1. spring mobile wire rope hoist 2. a gripping head adapted to the type of bottles 3. table - unloading conveyor / adapted to the type of bottles, pallet and the room for the assembly of the depalletizer. 4. a beam made of structural steel attached to the ceiling of the room or mounted on supports. Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to  ...

WaterJet STM MasterCut was manufactured in 2010 by the well-known Austrian company Stein-Moser GmbH. The machine performs precision machining of workpieces up to 180 mm thick using a pressurised water jet. The workpiece cutting process takes place on a large work area made of high-quality welded steel, with a length of 3000 mm and a width of 2000 mm, guaranteeing high stability and reducing the vibrations generated during machining. A modern CNC control installed in the control panel allows programming of the operating modes and full control of the machine. The STM WS3020 water cutting machine is equipped with a 37 kW BHDT HYTRON high-pressure pump, supplying the machine with high-pressure water. Technical parameters of STM MasterCut water cutting machine - working space (L x W): 3000 x 2000 mm - maximum workpiece thickness: 180 mm - positioning speed: 15 m/min - accuracy of po ...

Horizontal CNC machining center Manufacturer Mazak Type FH 880 Year of construction 1997 Control Mazatrol Mplus Travel X/Y/Z 1300/1100/1000 80 fold tool changers Tool holder SK50 2 compartment pallet changers Pallet size 800 x 800 controlled rotary table ( 4th axis ) Conveyor IKZ internal coolant supply 3D Radio Accelerator Machine is in a used good condition. Geometrically, the machine is very good.

// New equipment - never been used // Technical details Manufacturer : IKA Werke GmbH Model : UTL 2000/05 Type : Inline disperser / Mill, dispersing machine high shear Rotor speed : 5800 rpm (possible variation) Max product temperature : 160?C Viscosity (max.) 5000 mPas Max permissible overpressure: 16 bar Max permissible temperature of the double jacket: 120?C Max. permissible overpressure in the jacket: 2.5 bar Max. flow rate (standard operation / product: water): approx.2500 l/h Motor power: 5.5 kW Material in contact with the product : Stainless steel 316 Barrier pressurisation system Design: https://www.osertech.eu/wp-content/uploads/2022/02/IMG_9885.jpeg Use and operation The IKA ULTRA-TURRAX UTL 2000 is a high performance single stage continuous dispersion machine (rotor/stator), used for the production of emulsions and suspensions. The UTL single-stage d ...

Explosion proof motor 3 KW (ADF / ATEX: EExdellCT4) 2870 rpm IP 55 Turbine D.125 Volume, max. with H2O): 5000 l Viscosity, max. 15000 mPas Process pressure (max.) 0 bar Vacuum, max. 100 mbar Process temperature, max. 120 ?C Mixing tools Propeller Motor power, standard 3 kW Shaft size D.40 X L.1000 Weight approx. 42 kg New sealing cartridge installed (seals, ...) The IKA ROTOTRON? RT is an all-purpose jet-flow agitator used for homogenizing, dispersing, suspending, emulsifying, aerating, dissolving and improvement of heat transfer. The RT is most effectively used for tasks ranging between that of a conventional stirring machine and a dispersing machine with a rotor-stator system.

DEA SCIROCCO 151310 coordinate measuring machine built in 1997 in Italy, is used to make fast and highly accurate measurements of workpieces with complex shapes. Workpiece measurements are taken using contact or non-contact methods, which are then represented as a set of point coordinates. The dimensions of the measured workpiece are taken using the RENISHAW TP7M measuring probe, which is installed on the RENISHAW PH10MQ indexing head. The measuring probe uses strain gauge technology to eliminate granularity errors and achieve the highest measurement quality in the X,Y,Z axes with feeds of 1500 mm (X axis), 1300 mm (Y axis) and 1000 mm (Z axis). The measuring machine is offered with a wide range of equipment, including an advanced PC-DMIS package for Windows, performing detailed geometric measurements. The total weight of the machine is 3650 kg. Technical data of the DEA SCIROCC ...

x-travel: 3000 mm y-travel: 1200 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • RDS 2.5°x2.5° automatic rotary head • Multi-sensor capability, allowing the use of the following tactile probes working: ZEISS VAST-XXT, Viscan, DTS, LinenScan, RST-P and RENISHAW SP25, TP6, TP20 and TP200. • Calypso software • Machine precision: PE_E=(3.2+L/250)µm. MPE_P = 3.0 µm. MPE_THP=4.0 µm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

Rated power at 50%ED: 63kVA Short circuit current: 26.3kA Electrode force: 65-390daN / single stroke Projection: 450 - 750mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Foot switch with "de-energized attachment" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Brand NN Model: hydr hose press 8 - 63mm Year of construction: 2022, Unused Dimensions LxWxH (mm) 850 x 600 x 1320 Number of stucco in stock multiple Made in China Ø Diameter (mm) 8 to 63 Comments. Crimp from 8 to 63mm 2. Maximum opening: 120mm 3. Operating mode: manual transmission, automatic pedal 4. Largest Press Force: 600 tons 5. Oil Pump Pressure: 31.5 Mpa. 6. Electric Motor Power: 3 kw 7. Standard Voltage: 380v 8. 11 sets (8, 15, 19, 23, 26, 31, 36, 41, 47, 55, 63) 9. Weight: 300kg 10. Dimensions LxWxH: 680mm X 750mm X 1000mm 11. Press precision: 0.01mm 12.Tank: 60L 13. Oil pressure: 5ml/wheel 14. Noise: 65dB Conditions of sale As / is, no guarantee from seller

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Automatic pyramid tea bag forming and filling machine including volumetric dosing unit. Generally it is suitable for common rectangular tea bags or pyramid tea bags. Bag forming method: ultrasonic welding. Tag and thread must already be incorporated into the film. - Specifications: max. speed of the machine in neutral: 50 cycles per minute | dosing volume: 5~40 cm? | tea bag capacity: 1.5-10g | tea bag dimensions: pyramid bag: 50 / 60 / 70 / 80 mm, rectangular bag: LxW: 50x50 / 60?58 / 70?65 / 80?72 mm | roll width bag material: 120 / 140 / 160 / 180 mm | suitable bag material: P.E.T / nonwoven / nylon fabric | power supply: 220V, 50/60Hz | power consumption: 1.2kW | compressed air required: 0.6 MPa | compressed air consumption: 100l/min | machine dimensions LxWxH: 944x1130x2100 mm | weight: 420kg.

Automatic packing machine for packing pyramid tea bags and also rectangular and double chamber tea bags into 3-side sealed sachets. With a stack and count output of bags. 5 bags can be output in a group | PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 50 cycles per minute | dosing volume: 5~40 cm? | tea bag capacity: 1.5-10g | sachet dimensions LxW: 95x90mm (standard), optional: 85x80 / 105x100mm | suitable film for the sachets: heat sealable composite film (BOPP20/VM-PET12 / PE40, Paper / P.E, OPP20 / Pearl35) |power supply: 220V, 50/60Hz | power consumption: 2.1kW | compressed air required: 0.6 MPa | compressed air consumption: 200l/min | machine dimensions LxWxH: 2700x1450x1300 mm | weight: 420kg.