mp used for sale

Multi Panel, MP370 KEY-12 TFT, 6AV6 542-0DA10-0AX0, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Measuring amplifier, for flow meter, vibration measurement, display device, vibration measurement, monitor display -Manufacturer: HBM, industrial measuring amplifier -Type: PME MP60 -Number: 2 measuring amplifiers available -Price: per piece -Dimensions: 160/60/H145 mm -Weight: 0.9 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 -Item No.: DS851026 -Shaft: Ø 14 x 37 mm -Number: 11 servo motors available -Price: per piece -Dimensions: 200/85/H85 mm -Weight: 4.1 kg/pc.

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP57 2A IP64 -Item No.: DS421107 -Shaft: Ø 10 x 30 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 155/56/H70 mm -Weight: 1.3 kg/pc.

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0402 -Number: 7x Port Probe Switch available -Price: per piece -Dimensions: 240/145/H45 mm / 240/180/H50 mm -Weight: 1.2 kg / 1.4 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0404 -Number: 1x Port Probe Switch available -Dimensions: 240/180/H50 mm -Weight: 1.4 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ 2-304 -Length: 8.5 m -Connector: 5-pin -Transport dimensions: 580/450/H130 mm -Weight: 7.1 kg

Good Plansifter BÜHLER MPAH 628 Screening box 2.15 h., 24 sieve, 6 pass. ( 2x B1, 2x B2, 2x B3 ) without sieve stacks, 36x floor nozzle ø150 new, Cleaned, drive reviewed

Plansichter Buhler model Mpad 6.14, 6 working channels with 14 frames each, drive shaft with motor

used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 590/500/H150 mm -Weight: 8.3 kg

Grinding range: approx. 130 x 255 mm Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Space requirement: 750 x 700 x 1700 mm Weight: approx. 380 kg Pot disc Ø: 180 mm

MPE Tray sealer Serial: 1067 Stainless tray sealer, tooling for 185mm x130mm and 100mm x 90mm trays, adjustable temperature and timer controls, mobile, 1Ph

MIG/MAG hose assembly, MIG/MAG welding gun set, MIG/MAG welding torch -Manufacturer: Dinse, hose package with water-cooled wire feeder -Type: DIX MPZ -Length: 8 m -Connector: 5-pin -Transport dimensions: 600/500/H130 mm -Weight: 6 kg

Valve manifolds, multipole connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: Festo, Valve manifold type MPAL-VI 569926 -Solenoid valves: Type 573718 / 533342 5 pieces -Individual components: see photos -Price/Fee: complete -Dimensions: 150/140/H70 mm -Weight: 0.9 kg

Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP85 10A Bgr2 R Rev2 IP64 -Item No.: DS851028 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 200/85/H110 mm -Weight: 3.5 kg/pc.

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 160 x 50 mm Truss type: AUF'B'E0436 Agraffe: 4 HK (hooks) Clear width: 3,900 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Nucleus, servomotor -Type: NUDrive MP42 2A Size 42 R Rev.2 IP64 -Item No.: DS421106 -Shaft: Ø 14 x 35 mm -Number: 2 servo motors available -Price: per piece -Dimensions: 134/42/H56 mm -Weight: 0.6 kg/pc.

Light barrier amplifier, remote amplifier -24 V DC Max. 6.5 VA 10 Hz -Individual relays: 4 and individual NPN/PNP relays: 4 -screw terminals -Weight: 0.2 kg

Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: MPB Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 120 x 50 mm Truss type: AUF'B'E0442 Agraffe: 4 HK (hooks) Clear width: 3,900 mm 02x safety pins, used Version: completely galvanized To secure the longitudinal members Against unintentional lifting

Proportional pressure control directional valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm -Weight: 2 kg

Proportional pressure control directional control valves, solenoid valves, pneumatic valves, air valves, pressure valves, valve blocks, control blocks -Operating pressure: 8 bar 120 psi -Dimensions: 200/85/H75 mm Price: per piece -Quantity: 2 available -Weight: 2 kg/piece

; Gross weight [kg]: 450; Engine: Kubota D1105-EF02; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 38

Technical data for the top-up tabs: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Aufstocktabschen, used Total length: approx. 400 mm Total width: approx. 129 mm Internal width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 100 mm Hole grid i. d. width x height: approx. 85 x 100 mm BoreholeØ: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Hint: No screw material included.

A stationary oil lubricated, belt driven reciprocating compressor from Mark with an air receiver is offered. Motor power: 7.5kW (10hp), intake capacity: 1300l/min, max. operating pressure: 10bar, air receiver volume: 500l, compressed air connection: G 1/2. Dimensions X/Y/Z: approx. 1910mm/600mm/1230mm, weight: approx. 330kg. Inspection possible by prior arrangement.

weight max.: 2000 t fork length: 1200 mm height of stroke: 1650 mm Number of working hours: 1700 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Double Column Machining Center TOSHIBA MPC-3180B Table mm.8000 x 2700 Distance between columns mm.3100 X mm.9000 Y mm.3900 Z Verticaal RAM stroke mm.900 W Vertical Crossrail stroke mm.1600 Automatic indexed every 5 degrees 5 face head Distance table to spindle nose mm.2440 Table load Kg. 20.000 Spindle speed 5-3000 rpm 2 ranges Spindle taper BT 50 Ram section 380 x 380 Machine dimensions mm.29110 x 9900 x 7260 Machine weight Kg. 151.000 Year 2007 Standard options : 5-face cutter head Automatic attachment (5-face cutter head or other attachments)index (AAI) (4-position index by 90.) Automatic tool loading/unloading device for vertical spindle and horizontal spindle) CNC controller including standard and pack specifications Pendant operation box with electrically-driven free arm Hydraulic unit Oil cooling unit (AKZ 908) Hydraulic crossrail servo balancing s ...

A Rühle vacuum cooling mixer for the food industry is available. Container volume: 400l, max. filling capacity: 300l, mixing arm speed: 25rpm, lifting aid load capacity: 400kg. Machine dimensions X/Y/Z: approx. 1900mm/2150mm/1650mm, weight: approx. 1500kg. Including an integrated feed and lifting system. Documentation available. An on-site inspection is possible.

MPS EB 370-8 COLOR FLEXO Labelpress machine Year 2016 Printing width max. 360mm  Equipment: Unwinder 1000mm diameter, 76mm expandable shaft 8 color Flexo – servo driven units Teknek two-sided web cleaner Double the station iStip Laminator on rail De-lam re-lam Web Turn bar BST Powerscope 4000 8 x UV from GEW, E-Bricks stepless, housing E2C Rewinder Accessories:

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet rack beam: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack traverse, used Material color: yellow Box profile: 80 x 50 mm Truss type: AUF'B'E0488 Agraffe: 4 HK (hook) Clear width: 2,750 mm 02x locking pins, used Finish: completely galvanized To secure the longitudinal beams Against unintentional lifting

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for the pallet rack beam: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack traverse, used Material color: yellow Box profile: 80 x 50 mm Truss type: AUF'B'E0488 Agraffe: 4 HK (hook) Clear width: 1,000 mm 02x locking pins, used Finish: completely galvanized To secure the longitudinal beams Against unintentional lifting

Working range: 1250x2250mm, max. feed speed: 48m/min, welding range: M3-M8, welding diameter: 3-8mm, stud length: 8-40mm, max. welding capacity: 30-40studs/min, max. feed: 48m/min, positioning accuracy: +/-0.2mm, length: 2400mm, width: 2700mm, height: 3100mm, the machine has been used very little and is in good condition. An on-site inspection is possible.

This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details.

; Gross weight [kg]: 350; Engine: Kubota D722; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger, 3-way valve, Output sockets: 63A - 16A; Water Tank Volume [l]: 58

Frame width: 1,170 / height: 900 mm / vertical depth: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized

; Gross weight [kg]: 345; Engine: Kubota D722; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and earth pin, Sockets: (3P) 16A - (2P) 16A - Schuko, 230V/400V; Water Tank Volume [l]: 25

This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details.