moving used for sale

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30°left and once on the right. - the swivel adjustment becomes pneumatic,  ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4,0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397088 The data for this ad was created with ModulMWS - the software solution of  ...

sheet width - max.: 1255 mm plate thickness: 4,0 mm ST plate thickness: 2,0 mm VA plate thickness: 6,0 mm ALU number of strokes - loaded: ~ 66 Hübe/min. cutting angle: 1,5 ° total power requirement: 5,5 kW weight of the machine ca.: 2600 kg. range L-W-H: 2300 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition () Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325278 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23130 Specifications: - Total payload driven + moving unit 60000 kg - Load capacity per container 30000 kg - Workpiece diameter 500 - 4000 mm - Adjustable center distance of the support rollers - Roll diameter 480 mm - Roll width 100 mm - infinitely variable rotation speed - Hand-held remote control for re- and Li. run - Drive 400 V - driven with motorized rail chassis - Space requirements Unit approx. W 4000 x H 1140 x D 1800 mm - Platzb. with running unit approx. W 3500 x H 1100 x D 1400 mm - Weight tr. Unit approx. 4800 kg - Weight with running unit approx. 3500 kg

plate thickness: 8,0 mm ST plate thickness: 5,0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60 l engine output: 4,0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foots ...

turning length: 750 mm turning diameter: 310 mm turning diameter over slide rest: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 4x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindl ...

turning length: 750 mm turning diameter: 310 mm centre height: 175 mm spindle bore: 32,0 mm tailstock quill taper MT: 3 MK turning speeds: 85 - 2200 U/min bed width: 200 mm spindle taper: DIN 55027 GR 5 total power requirement: 2,2 kW weight of the machine ca.: 710 kg range L-W-H: 1884 x 717 x 1262 mm New price ~ 20.000 euros from a technical college () Furnishing: - Robust conventional center lathe - 3-jaw lathe chuck Ø 160 mm, with replacement jaws - NEWALL digital display, front left - MULTIFIX steel holder with 3x inserts - fixed bezel - moving bezel - Movable tailstock - Foot/spindle brake - Machine swing feet - User manual (PDF/NL) all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Turning diameter over support 175 mm - Spindle bore 32 mm - bed width 200 mm - Spindle mount / DIN 55027 GR 5 - Spindle taper 4.5 M - Spindle speed 85 - 2000 r ...

pressure: 75,0 t chamfer lenght: 2620 mm distance between columns: 2055 mm column arm: 400 mm ajustment speed: 100 mm/sec working feed: 10,0 mm/sec return speed: 90,0 mm/sec stroke: ~ 140 mm dayligth: ~ 360 mm table height: 930 mm table width: 85,0 mm Control: ELGO P8822 oil volume: 150 ltr. engine output: 7,5 kW weight of the machine ca.: ~ 6.500 kg. range L-W-H: 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit digital position indicator Entry of target/actual values possible - Electro-motor backgauge - X axis Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lat ...

CNC Plasma Cutter, Plasma Cutting System, Portable Plasma THC, Large Format portable plasma cutting system / oxyfuel cutting machine large format Working area 3000x1500mm without plasma cutter With height compensation THC Software StarCAM Machine Voltage Signal phas 220V ,50HZ Plasma power Voltage 380V 3 Phase,50HZ Cutting mode Plasma+Flame Effective cutting range(mm) 1500mm×3000mm Cutting speed(mm/min) 50-3500mm/min Rotational Speed 0-5000mm/min Plasma cutting thickness According to models Moving precision ±0.2mm/m Cutting system Fangling F2100B THC Fangling F1620 Software StarCAM Total weight(kg) 150kg Emergency stop Yes Working temperature -5~45°C Relative humidity

COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine was manufactured in Italy in 1988. The thermoforming line, consisting of, among others, a heating station, a bulge photocell and a moulded parts conveyor, is designed for the fully automatic production of oversized parts using the thermoforming method. The COMI RICO CCL 1900 x 900 -13T-AB thermoforming machine is equipped with a gauge measuring the thickness of the platen in order to avoid accidentally taking two platens from the package at the same time. The platens, by means of transport grippers actuated by pneumatic cylinders, reach the individual work stations, i.e. the preheating station, consisting of two opposing panels, the plasticising preheating station and the forming unit. In the forming unit, the thermoforming process takes place, during which a BOTTINI GIANNI press with an upper and lower moving table peripherall ...

Overview The Bag in Box filler was manufactured in 2009. As the owner has upgraded his filling equipment, this machine is for sale. Technical Specification: Capacity: 600 bags/h at 3l 500 bags/h at 5l 400 bags/h at 10l 200 bags/h at 20l Nitrogen jet system on filling valve Features: Machine is completely made in stainless steel; the supporting frame is composed of a heavy welded tubular and the surface is handled in conformity with a particular treatment where special glass micro-spheres are used (of auto-draining type and washable), particularly suitable for the food processing industry. Adjustable jerk-cutter which is insert in loading position of the bag before filling, to avoid useless mechanical stress. Filling valve complete with mechanical capacity limiting device; it is completely made in AISI 316 stainless steel with seals suitable to be sanitized by steam (with the possibility  ...

Panel mount gauge set, panel panel gauge with moving coil gauge WEIGEL PQ72K scale range: 0 - 600 A Measuring range: 0 - 60 mV Accuracy class : 1.5 Built-in gauge set consists of 2 gauges ! unused ! Dimensions(single gauge): 72 x 58 x 72 mm Dimensions: 190 x 85 x 80 mm

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:10000 mm

Panel mount gauge set, panel panel panel gauge with moving coil gauge AMS SQ72DS 019020200 scale range: 0 - 600 A Measuring range: 0 - 60 mV Accuracy class : 1.5 IP54 built-in gauge set consists of 2 gauges ! unused ! Dimensions(single gauge): 72 x 50 x 72 mm Dimensions: 160 x 85 x 75 mm

Panel mount gauge set, panel panel gauge with moving coil gauge AMS SQ72DS 19010200 scale range: 0 - 100 V Measuring range: 0 - 100 V Accuracy class : 1.5 IP54 Built-in gauge set consists of 3 gauges ! unused !; Dimensions(single gauge): 72 x 50 x 72 mm Dimensions: 240 x 85 x 75 mm

Level indicator, Mechanical level indicator for liquid media, 5 pieces PAGUS G3/8 ( inches ) Measuring height: 40 mm level indicator in a sight glass sight glass diameter: Ø 11 mm Mounting type: Wall mounting no moving or electrical parts vent hole in the lid nut: Width across flats 22 mm Material: aluminium ( housing ), glass ( sight glass ) identical HONSBERG NA-010HM40 Also available in other quantities ! New ! Dimensions ( level indicator without nut ): 85 x 45 x 17 mm Dimensions ( packaging ): 120 x 100 x 50 mm

Moving centering point, heavy duty grain tip ROTERBERG, WMW DREHMEISTER Type P TGL 30-2325 diameter : Ø 155 mm Grains diameter: Ø 64 mm inner diameter (receptacle): 135 / 127 x 102 mm (conical) used, tested ! Dimensions: 299 x 155 x 155 mm

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:16000 mm

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:12000 mm

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:19000 mm

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm

LINEAR AXLE:. - Movement:3500 mm - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm

LINEAR AXLE:. - Movement:2500 mm - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:4000 mm

Tailstock with quill and moving grain tip CMB TD35/250 Tool holder: MK3 Center height: 250 mm Quill stroke: approx. 100 mm Quill diameter: Ø 45 mm Base: 285 x 125 mm hole spacing: 185 mm hole diameter: Ø 16.5 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 450 x 260 x 310 mm

max. flow rate: 1500 m³/h max. vacuum: 2500 Pa 1 filter, filter area: 15 m² electr. Connection: 400 V, 2.2 kW 2 intake openings: 140 mm Ø Space requirement of the system: 950 x 750 x 1375 mm Weight: 74 kg 2 moving. Extraction arms: 2 x 1.5 m long

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

sheet width: 2050 mm plate thickness: 6,0 mm pre-bending capacity: 4,0 mm upper roll diameter: 200 mm lower roll diameter: 180 mm bending speed: 5,2 m/min diameter: ca. 280 mm work height max.: 980 mm total power requirement: 5,5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital positi ...

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Machine like NEW () Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion ...

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4,0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of  ...

sheet width: 2550 mm plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm cutting angle: 1°30 down holder: 12 Stück no. of strokes: 30 - 40 Hub/min back stop - adjustable: ca. 950 mm Control: DAC 150 engine output: 7,5 kW weight: 2800 kg range L-W-H: 3100 x 1900 x 1700 mm very well-maintained condition () Furnishing: - electro-hydraulic sheet metal shears // swing cut - DELEM DAC 150 NC control operable from the front Entry of target / actual for electr. backgauge - NC motorized backgauge with ball screws + guide shaft - electrical cutting length limitation - manual cutting gap adjustment - 1x side stop - 2x support arms - 1x free moving footswitch - front finger protection - EMERGENCY OFF button + main switch at the front - Instruction manual control Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325295 The data for this ad was create ...

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

Offer 23205 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Offer 23216 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg

sheet width: 1050 mm plate thickness: 8,0 mm distance between columns: 1250 mm angle adjustable from - to: 0 - 180 Grad upper clamping bar adjustment: 350 mm traversing speed: OW 4,4 mm/sek Control: ELGO TYP 86 back stop - adjustable: max. 1000 mm engine output: 5,5 kW weight of the machine ca.: 3200 kg range L-W-H: 1900 x 2600 x 1600 mm maintained condition with a lot of bending tools () Pointed rails, radius rails, bending rails, divided goats foot rails etc. Furnishing: - heavy duty heavy duty folding machine, easy to operate - Angle adjustment via electric potentiometer - ELGO NC control unit TYPE 86 for electric backgauge - NC electric backgauge, with rear sheet metal support surface - electric/motorized bending beam - Electric/motorized upper beam .. max. 350 mm - manual lower beam adjustment .. max. 125 mm - manual bending beam adjustment .. max. 125 mm - Upper beam with 2x gui ...

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

weight max. in kg: max. 1000 kg turning speeds: 0,18 - 0,58 U/min height: 976 - 1436 mm inclination: 0 - 115 ° table diameter: 895 mm voltage: 380 V total power requirement: 2,0 kW weight: 685 kg range L-W-H: 2414 x 920 x 1436 mm he AK BEND SRH hydraulic weld positioner is great for welding, assembly and maintenance work. The positioning is done via a hydraulic turning and tilting function. Description : - hydraulic turning and tilting function - Fast handling of workpieces - Highest productivity through optimal working position - Lifting, tilting and turning of workpieces in one setting - Low non-productive times by turning components - Highest work performance through pleasant working - Back-friendly work for the user Furnishing : - Stepless speed adjustment - free-moving footswitch - Handheld remote control with 5 meter cable - freely movable control panel with digital speed display  ...

Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8 More then 300 machines new and second hand on our seema .de

Used sander VIET mod. S3 333TM machine with moving heads and fixed table Development of MM tapes. 2620 x 1380 CE standards I ° steel calibrator roller group diameter mm. 240 motor power KW 15 II° rubber sander roller group 40SH diameter mm. 320 motor power KW 11 with inverter III° combined sander roller group rubber roller 30 SH diameter mm. 190 sectioned electronic buffer 42 sectors motor power KW 11 with inverter IV° Brite satin brush group motor power KW 1,1 workable width mm. 1350 workable thickness mm. 3-16 minimum length pieces mm. 250 conveyor motor KW 2,2 with inverter depressor KW 4 Nr. 3 abrasive belt cleaning blowers touch-screen control panel SUPER TS COLOR 10 Automatic working dimension positioner by workpiece compressed air consumption 1248 NL/MIN intake air flow 13.000 m3/h absorption 87A motor with greater absorption 28A weigh ...

5 axis Swiss lathe with moving bushing - bar capacity 36 mm - 87 collets - 2 driven spindles - brand new Mitsubishi Ac servo amplifier mod. MR-J2S-70A - Barload mod.BFG 35 barfeed new in 2007 - chip conveyor - long parts ejecton - manuals - Syntec Control

Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...

Granulator - G15035-DT (3 pcs.) Year of construction: 2013-2014 Location: Lodz, Poland Slow-moving granulator with gearbox Power: 2.2 kW 4 stator blades, 15 rotor blades, the screen - interchangeable Hopper inlet: 390x240 mm Grinding chamber opening: 340x170 mm Hole for material case is prepared for connection with suction conveyor All offered equipment is started by our service technicians before being sold. It is possible to receive a video of the technical tests of the selected devices or to participate in live technical tests at our company in Łódź. Price: On request

Gebr. Tenon cutter Carpentry Abundmaschine KRÜSI ZA-66/95 YOC 1995 CE version with protective cabin Crosscut saws: Motor power: 4.0 kW 65° swivel Lateral adjustment by handwheel travel: 250 mm max. saw blade diameter: 750 mm max. cutting height: 290 mm Cutting saw – slitting unit: Motor power: 7.5 kW 45° swivel Saw blade diameter: 2 x 450 mm max. cutting depth: 175 mm Settling saws: Motor power: top 2.2 kW / bottom 2.2 kW Complete sawing unit can be swivelled forward up to 45° Additional swivel heads: swivel by +/- 45° possible max. saw blade diameter: 350 mm max. cutting depth: 125 mm Sliding table: swivel +/- 60° on both sides Laser for cutting position indication for the swivel cross-cut saws Chassis Moving trestle Extraction connection: 2 x 120 mm and 2 x 80 mm Machine dimensions measured without sliding carriage: L: 470 cm W: 135  ...

diameter: 300 mm turnability of the table - man. & mec.: 360 ° reading precision - pitch: 1 sec lighting: Halogen enlargement: 10x/20x Measuring range: 250x125 mm cross-moving table: 0: 520x280 mm movement longitudinal: 250 mm Cross travel: 125 mm table load capacity: 20 kg dimensions of the machine ca.: 520x1000x1070 mm weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 fixed setting stick with roller quills 1 moving setting stick

1. RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction  ...