moving used for sale

Metal lathe make MEXPOL / PONAR type TUR 50 SMachine -No: 45499 built in 1985Technical specifications:Distance between centers: 1000 mmCenter height: 250 mmCircumferential diameter over bed: 500 mmCircumferential diameter over support: 300 mmSpindle bore: 80 mmShort cone: size 836 spindle speeds: 18 - 1800 rpm.42 feeds lengthways: 0.64 - 26 mmacross: 0.32 - 13 mmMetric thread pitches: 42Inch thread: 42Diametrical pitch thread: 42Machine weight: 2720 kgRequired space approx .: 2500 x 1300 x 1630 mmWith- Acu-Rite digital display- three-jaw lathe chuck- faceplate- 4-way steel holder- 1 steady rest (fixed)- 1 moving center punchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your querie ...

Woodturning machine make FLOTT type DB 180 D-No: 483001/30830004, year of construction 1984Technical specifications:Tip height: 180 mmDistance between centers: 1000 mm5 speeds: 600/960/1220/1750/2800 rpmSpindle mount: M 33 DIN 870Spindle mount: MK 2Tailstock taper: MK 2Power connection: 380 V, 50 HzMotor power: 0.55 kWWeight: 67 kgWith- moving center point- chisel rest- face driver- Drill chuck with spigotused, little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.

MOVING COLUMN MILLING-BORING MACHINE Condition Used Very good condition Control type Selca S4060-D Table length 2.800 mm Table width 1.100 mm Table height 210 mm T-slot dimensions Centre 22H7 - Others 22 H8 Number of T-quarries n. 7 T-slot spacing 160 mm Max. permissible weight 10.000 Kg X axis stroke 2.500 mm Y-axis stroke 1.675 mm Z axis stroke 1.250 mm Fast 30.000 mm/min Axle motor torque 58 Nm Automatic head Axis A 2,5° - Axis B 1° Spindle cone ISO 50 DIN 69871 Rotational speed 5,000 rpm Spindle power 17 Kw Tool change 40 positions N. 2 constant power speeds I range 250-1250 rpm - II range 1000-5000 rpm Clamping system BERG pliers Selbox S2 remote flyer

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

The machine is already in Poland with us on site. , a drilling rig from the well-known Swedish brand Sandvik. Used for rocks mainly underground but can also work on the surface. This model is An excellent tool for securing high workings and tunnels, ensuring a safe working environment and constant access to the workplace. The universal screwdriver head design allows all common screw types and combinations to be used, with bolt lengths of up to 6 meters (20 feet), depending on the screwdriver head alternative chosen. The telescopic boom allows you to mount several rows of bolts without moving the machine. An optional second boom – screen holder or basket boom – increases productivity and versatility. Additional automatic functions allow the operator to focus on safe, fast and efficient rock reinforcement. The air-conditioned, soundproofed and tilting cab further enhances safety an ...

ERNST EG3M deburring machine was built in 1988 in Germany. The surface machining of workpieces with a maximum thickness of 70 mm is performed dry” by means of a burr-removing sanding roller installed in the machine and two brush rollers moving in the opposite direction intended for edge rounding. To prevent the workpiece from being drawn into the centre of the ERNST EG 3 M deburring machine, the sheet to be deburred is pressed onto the conveyor belt via a driven roller on slack bearings. The ERNST EG 3/M 1400 automatic deburring machine also allows the use of a magnetic belt to process smaller workpieces. The total weight of the deburring machine is 3500 kg. Technical data of the ERNST EG3M deburring machine - maximum workpiece thickness: 70 mm - minimum workpiece thickness: 1 mm - minimum workpiece length: 350 mm - minimum workpiece length on magnetic band: 80 mm - minimum wor ...

MACRI ITALIA PROVAR 6-45 U-D bending machine was manufactured in 2019 in Italy. The fully automatic mandrel bending machine is used in the process of machining tubes and profiles with a maximum diameter of 45 mm in 6 numerically controlled axes (X, Y, Z, B1, B2, A). Excellent process stability and workpiece quality, with the possibility of bending standard and variable (free) radiuses, are guaranteed thanks to the robust steel construction, the moving head with high-strength gears and the equipping of all machine axes with brushless servomotors. The MACRI PROVAR 6-45 U-D CNC tube bending machine is controlled using state-of-the-art MACRI software with the ability of importing files from 3D programmes and performing an anti-collision test with 3D simulation, programming of positioner force and automatic mandrel lubrication and many other useful functions. The total weight of the machi ...

Dimensions 6.000 x 3.000 mm Constructed in 2013 Moving paddled drums diam. 750 mm Staircase Discharging screw on bottom Combs for floating material We can add extraction drained screw on request

Granulator - Wittmann CM5 (3 pcs.) Location: Lodz, Poland Year of construction: 2011 Slow-moving granulator with gearbox Power: 1.1 kW 2 stator knives, 2 x pushers, rotor with the cutters Hopper inlet: 240x210 mm Grinding chamber opening: 240x116 mm Granulator without sieve, regulation of the grinding thickness by means of the hole adjustment between milling and stator knife Granule mill is used for grinding very hard details, waste - just like the crusher Hole for material case is prepared for connecting with suction conveyor All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet  

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

IMA SHRINKWRAPPER, MODEL MS450EA-T450 Year of construction: 2006 Automatic machine with alternating movements operating with reels of shrinkable film. The packages obtained are subsequently heat-shrunk by the tunnel placed at the exit of the shrinkwrapper. The machine is designed to pack single or bundled cases or products in pre-glued cartons or trays of standardized dimensions. TECHNICAL DATA Net weight: Kg 1500 Length: mm 3100 Width: mm 2100 Height: mm 1980 Production characteristics: Shutter conveyor belt dim. (LxW): 1760 x 110 mm Polyurethan conveyor belt dim. (LxW): 540 x 280 mm Tunnel dimension (LxWxH): 1500 x 1000 x 1720 mm Tunnel conveyor belt dim. (LxW): 1300 x 500 mm The product coming from the upstream line enters the belt that accompanies it up to the level layering area. The bundle, pushed forward, causes the unwinding of the film from the two reels and ...

Two drawer cabinets with roller drawers incl. accessories for CNC lathe Traub TNS30 are offered. Accessories e.g. Traub Adjusting Microscope Traub Adjustment Tool VDI30 Soft top jaws approx. 82 set (3 jaws each) approx. 5 driven tools (partially disassembled) approx. 80 tool holders Approx. 72 collets approx. 32 collets Lot of parting chisel Lot of turning chisels Post Milling Cutter Dial gauge Lot of centering drill bits Post of interchangeable tips for moving tips Lot of Inserts Lot of spare parts Traub Without the pictured 3-jaw chuck Cabinet Height 1m, Width 70cm Depth 70cm The photos do not show the complete scope of delivery. More photos on request or by visiting on site. Listing without guarantee! Sale price

sheet width: 1040 mm plate thickness: 2,50 mm no. of strokes: 63 Hub/min cutting angle: 1,66 ° column arm: 100 mm table height: ca. 750 mm total power requirement: 3,0 kW weight of the machine ca.: 750 kg range L-W-H: 1470 x 1550 x 1020 mm Refurbished - shear blades sharpened like New () Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

bending diam. - max.: 36,0 mm ST cutting thickness max.: 36,0 mm ST motor: 1450 U/min oil volume: 32,0 l motor: 380 Volt 50 Hz total power requirement: 5,5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Furnishing : - Maximum performance, minimum consumption - hydraulic combined machine for bending and cutting operations for e.g. structural steel or solid material - Bending mode with 3x different angle settings - Manual and automatic mode selectable - simultaneous bending and cutting operations When the machine is running, - - ECO mode = hydraulic pump only runs when the foot switch is actuated - free-moving footswitch - Operation manual Technical specifications : - Steel 45 kg / mm² .. Bend Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bend Ø 20.0 mm / cutting Ø 24.0 mm - Steel 65 kg / mm² .. bend Ø 32.0 mm / cutting Ø 32.0 mm for 2x pieces - steel ...

Cutting power : 2 Kw Working hours : 29.221 Table size : 4000 mm x 2000 mm Siemens control unit Moving Double Table Cutting with Nitrogen or Oxygen

- Payload: 6000 kg - For standard skips 4 - 7 m3 (see photo) - Motor: electric 400V 50Hz - For lifting and moving skips within the company site. (1 person, walk speed)

JOTES SPD 30B surface grinding machine of Polish production is a manufacturing machine with horizontal spindle axis that performs grinding on the periphery of the grinding wheel. The workpiece of maximum length 1000 mm and width 300 mm is mounted on a rectangular electromagnetic table or directly on the grinding machine table. The work table moves on the base guideways and the change of its direction of movement can be performed automatically by bumpers or manually by adjusting a suitable lever. The hydraulic drive of the machine’s work table allows continuous adjustment of the speed in the range from 2 to 30 m/min. The installed grinding wheels, with a diameter of 350 mm and a width of 63 mm, are driven by an electric motor mounted directly on the grinding wheel spindle. The grinding wheels are moving at a peripheral speed of 26 m/s. The total weight of the magnetic surface grin ...

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:15000 mm

Machine comes with robot Power : 50 Ton Distance between columns: 320x320 Screw diameter: 30 Calculated injection volume: 70 Min / Max mold thickness: 200 Euromap: 500-100 Moving platen stroke: 350 Working hours: 78.000

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmSpeed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmMilling spindle upper side1 Bar diametre80 mmMax. Turning Length1530 mmSpeed max.4000 rpmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Weight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle Hol ...

material width: 3000 mm material thickness: 0 mm no. of straightening rolls: 0 total power requirement: 22 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 7,5 x 2,5 x 2,9 m D U N K E S Hydraulic Straightening System for Flat material and Section Material With Straightening Press ( C-Frame ) Model HR 63/TR 25/ HRW 25 Year 1990 ( H 89-1960 ) ____________________________________________________________ Consisting of: Straightening C-Frame Press, Model HR 63, Pressure 63 to, Stroke of Piston 160 mm, Straightening speed up/down 25/75 mm/s, Daylight 550 mm, Distance to column 620 mm, sensitive Straightening stroke via handlever with turret-stop, Measuring device for accurate straitening via a lightbar Horizontal Straightening Device Model HRW 25, Pressure 25 tons attached on right hand side of vertical Press, straightening stroke 160 mm, straightening speed fwd/bwd 57/1 ...

LINEAR AXLE:. - Number of moving slides:2 DIMENSIONS / WEIGHTS:. - space requirements length:7000 mm

Special offer: 6 col 1200 mm Flexotecnica flexopress, special price for quick sale can be shown in operation unwinder rewinder print repeat 300 up to 1200 mm! unwinder diam. 1000 rewinder diam 900 BUT CAN BE EASILY ADAPTED to 1000 mm ( by moving / changing place of the current actuator of the pressing shaft or by changing the actuator for a different one.-information from the printer) electrical drying priinting rolls: 300-6pcs,320-6pcs,340-6pcs,360-pcs,380-6szt, 400-6pcs, 420 -2pcs,440-4pcs,460-6pcs,480-4pcs,500-6pcs,520-4pcs,540-4pcs,560-4pcs,5 80-4pcs,600-6pcs,620-4pcs,650-4pcs,680-pc,700-4pcs,720-4pcs,750-4pcs,8 00-4pcs,850-4pcs,900-2pcs,950-2pcs,1000-2pcs,1050-2,1150-2pcs,1200-2pc s Machine offered subject to unsold Machine offered subject to unsold wide offer of high quality used machines for attractive prices we also buy for stock / warehouses in EU over 20 years o ...

LINEAR AXLE:. - Number of moving slides:1 DIMENSIONS / WEIGHTS:. - space requirements length:5000 mm

LINEAR AXLE:. - Number of moving slides:3 DIMENSIONS / WEIGHTS:. - space requirements length:24000 mm - total weight approx.:10100 kg

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke - stepless adjustable: 200 mm column arm: 300 mm table height: 1090 mm dayligth: 450 mm working feed: 9,0 mm/sec return speed: 80,0 mm/sec Control: NC ATL 550 hydraulic: 265 bar voltage: 380 V total power requirement: 18,7 kW weight: 15000 kg range L-W-H: 4400 x 1900 x 3000 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATL 550 Positioning of backgauge ( X ) Depth setting positioning ( Y1+Y2 ) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, front left - electric backgauge, on ball screws with 2 stop fingers, manually adjustable - manual table crowning, with analogue display Adjustment at the front left, with a hand crank - divided deer foot upper tool 85° - reversible Mul ...

Busch MINK MM 1252 AV vacuum pump with 5.5 kW motor (flow rate 250 m3/h) Dry claw vacuum pump INDUSTRIAL VACUUM GENERATION – HIGH EFFICIENCY, LOW MAINTENANCE Busch MINK 1252 AV vacuum pump 250m3/h for CNC Significant energy savings compared to conventional vacuum generators, minimizing operating costs Almost maintenance-free operation Dry and contact-free operation Endurance Proven design for more than 200,000 vacuum pumps in operation Information: Vacuum pump: BUSCH MINK MM 1252 AV 250m3/h for CNC Ultimate pressure: 100hPa (mbar) Normal engine speed: 3000 min-1 ISO2151 Noise Level: 75dB(A) Weight: 240kg Zwnhrefr Dimensions: 101x51.5x45cm Gas inlet/outlet: G 2" / R 1" Motor: 5.5 kW 3 x 230/400 V, 50 Hz Speed: 3000 rpm Bg. 112M B5-250 IP 55 Inlet Side: G2 Check Valve Outlet side: Integrated silencer Inlet filter: with paper cartridge Technical Specif ...

LIQUIDATION. Automatic hamburger forming machine, GASER brand, model R2000. SPECIFICATIONS Can be attached to any stuffer (30 mm outer diameter outlet). Place cellophane paper on both sides automatically and cut it in the same way as the hamburger or straight (depending on request). It produces 50 to 75 burgers/minute, depending on the speed of the stuffer and the type of dough. 108 mm round shaped burgers. Weight of the burgers from 70 to 130 grams (thickness adjustable by moving a screw). Consume cellophane coils. Pneumatic operation at 6 Kg/cm2. Air consumption 100 liters/minute. Electrical power 100 watts. Easy to clean. Dimensions: 850 x 580 x 1,300 mm. Machine weight (without conveyor belt): 70 Kg. Constructed of stainless steel. The simplest, most effective and economical technique. The machine is ready to plug in and work with. Burger Former, Hamburger Making  ...

Kromel screw conveyor is used in various industries for moving variety of materials. It operates by using a rotating helical screw blade within a tube or trough to move products to a given height or distance. Equipped with continuous feed product shredder which allows for the continual feeding of meat into the machine without stopping, saving processing time. Continuous feed shredders are more efficient compared to batch shredders, where the machine needs to be stopped to remove the product​. Whole construction made of stainless steel, which guarantees the highest hygiene and ease of maintenance. Loading height: 1300mm / 1000mm without product shredder Unloading height (regulated): 2250mm or 1850mm Distance between loading and unloading section: 3700mm Total length: 4200mm Tube diameter: 200mm

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

pressure: 300 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 500 mm ram stroke speed: 140 mm/sec return speed: 150 mm/sec work speed: 10,0 mm/sec work stroke: 320 mm dayligth: 590 mm table height: 905 mm oil volume: 400 ltr. voltage: 400 Volt working pressure: 283 bar Number of working hours: ~ 21.835 h total power requirement: 23,0 kW weight: 18.250 kg Dimensions (HxWxD): 4550 x 2250 x 3050 mm current new price ~ 135.000 euros -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T (touch screen) 2D graphic touch screen programming mode 17 high-resolution color TFT Complete Windows application suite Delem Modusys compatibility (module  ...

ROLL DIAMETER 550 mm POLL WORKING LENGTH 1530 mm MOTOR POWER 110 KW DIMENSIONS: 630022301830 (L×W×H) SPEED RATIO OF ROLLS 1:1.27 Structure description 1 Base frame is welded and annealed . 2 The motor is 3- phase asynchronous motor, protection levels :IP54. 3 The driving type :Single out- shaft or double out- shaft. The speed reducer is hard gear reducer,which has long service life and low noise. 4 The roller bearing is rolling bearing with Low noise, save power almost 20%. the roller bearing use grease lubricating. 5 The nip adjusting Motor type 6 This machine is equipped with two pieces of moving blade. 7 Safety device : Pull the safety rod to achieve emergency stop. It can be installed with kick stop device and emergency stop device for safety. 8 The electrical design theory conform to the TWO ROLL MILL specifications strictly . It is equipped  ...

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 1200 x 780 mm blade length: 200 x 200 mm strokes per minute: ca. 60 min angle adjustable from - to: 15 - 150 Grad engine output: 4,0 kW weight of the machine ca.: 1200 kg dimensions of the machine ca.: 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becom ...

sheet width: 3220 mm plate thickness: 2,0 mm daylight opening: 160 mm adjustment: 80,0 mm bending angle max.: 120 ° total power requirement: 4,0 kW weight: 3.965 kg range L-W-H: 4575 x 2450 x 1550 mm Furnishing: - Motorized universal folding machine for single and series production - rotating upper beam / as an automatic tool changing system Reduces set-up and idle times - SCHRÖDER CNC control model POS 2000 with touch screen control panel Color display USB interface automatic cutting calculation Materials and tools library precise bending simulation - Servo converter controlled drives for bending/upper beam beam & electr. backgauge - CNC motorized lower beam adjustment - CNC electrically movable backgauge - with rear sheet metal support surface, including ball casters - Bending/upper tools : Station 1: 1x pointed rail Station 2: 1x split goat foot tool - Free-moving double  ...

CharacteristicsSwing- Ø, max.450 mmWeight approx.10000 KgDrive power milling spindle9,5/5,5 kWDrive power main spindle15/11 kWDrive power second spindle15/11 kWNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis+/-120 degreeMovements X / Z / Y455/800/+-105 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,001 degreeSpindle speed 2nd Spindle max.6000 rpmInput precision of C-axis on Mainspindle0,001 degreeBar diametre52 mmSpeed max.6000 rpmMax. Turning Length800 mmMax machining diameter430 mmDimensions (L x W x H)4,17 x 2,5 x 2,5 (4,55 x 2,5 x 2,5) mGeneralTurning-milling centre SZM: Tool spindle, Spindle 1, Spindle 2 and Turret 2 (Milling); Control: CELOS - ERGOline Spindle 1 hobbing functionSpindle 1 hobbing function Gear machining or spline machining is possible by synchronizing the rotary tool spindle rotation on turret 1 with the spind ...

Clean, carefully operated Bystar 1 with U-axis and moving cutting roosts Laser cutting machine

Key data: 580 mm, 1000 mm, 400 mm

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

It has a lifting and lateral moving function and four side clamping jaws, with a rotary table Manufacturer : AGROMAT Kft - Machine type: BEF-15 - Weight capacity: 1500 kg - Overall size: 4000 x 1800 x 3700 mm - accomadate sizes: 1200 x 800 x 700 mm - range of movement of clamping jaws: 150 mm - lifting height: 700 mm

Year: ca, 1988 tool taper: MK 3 weight of the machine ca.: 2,5 t digital: cross-moving table: feed:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SUTEAU ANVER XPM 18X13 300T receding head die cutting press was built in France in 2008. The machine aimed at mass production, is used in the process of precise cutting in foam and non-metallic materials, such as plastics, textiles and rubber. Built-in hydraulic systems combined with a stable design and reliable components ensure high precision and speed of cutting, regardless of machined material. The material taken from rolls or sheets is pressed against the machine head by the vertical movement of the working table, under which hydraulic cylinders are located. The cylinders exert a balanced pressure to achieve the ideal position of the table in relation to the head. The material is then machined using dies that can be mounted either to the head surface or on a lifted table. To facilitate the operator’s die positioning and the insertion and removal of the cut material, the SUTE ...

Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...

Description Piab 6010A vacuum pump replaces conventional compressors up to a size of 100m3. The patented vacuum pump is a smaller, more effective and reliable solution for vacuum generation. It is easy to install and can be adapted to your specific application requirements. Because the pump contains no moving parts, there is virtually no wear. In addition, no heat is generated, which avoids the static charge of the paper. Further advantages are the compact dimensions, the quiet operation and the low energy consumption. System completely pre-assembled. The pump always consists of a blown air and a vacuum side. Since the performance is individually adjustable, any compressor size can be replaced with a Piab vacuum pump.

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE