moving used for sale

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

Entry and pull-out system for scanners; movable units; complete with drives and pneumatics; Holding role is missing; Foerderhoehe 1.550 mm; servo motor for adjustable slides infeed system for scanner of boards; sidevise moveable; incl. motors and pneumatic; hold down roller is missing; transport level 1.550 mm; servodrive for sidevise moving

Description Brand Wagner Model Cobra 40-25 ID 7206 Status Active Price 2.600 € + VAT Year of manufacture 2014 Location Oradea (RO) High pressure diaphragm pump for coating Wagner Cobra 40-25 manufactured in 2014. Pressure ration: 40:1, Maximum fluid pressure: 250 bars, maximum flow rate: 5 l/min, weight: 32 kg. Application areas: wood and furniture industry, carpentry shops and joineries, agriculture, construction and earth moving, general metal industry, leather coating. Processable materials: water and solvent-based paints, wood coatings, moisture-sensitive materials, isocyanates, shear-sensitive coatings, UV-cure materials, temperature reactive materials (acrylics, for example), zinc primers. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least  ...

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1984 Condition: Very good Location: Rudniki - Poland Press Capacity: 400 Tons Rated Tonnage Point 12.5 mm The Height: 1018 mm Slide Adjustment: 305 mm Slide Stroke: 610 mm Bolster Size: 2743 x 1524 mm Slide Size: 2743 x 1524 mm SPM: 20 The Cushion Capacity: 70 tons x 2 pcs. The Cushion Stroke: 203 mm Main Motor Capacity: 60 KW Moving Bolster: Front Exit

Container control HEUFT SPECTRUM GX TI-D Device No. 2TG024370 Condition: good, ready for use at short notice Built in 2006 out of service since 2016 • Basic device container control • Discharge of box ejectors • Presence detection Optical/Infrared Device Specification / Specification of Device: - Output[B/h]: / performance [cont./h]: 3,600 - Bandgeschw. [mm/s]: / conveyor speed [mm/s]: approx. 0.5 - Roll division: / distance between roller axes: 75 mm - Box direction: / crate moving direction: Cross - Belt height 1/2[mm]: / conveyor height 1/2[mm]: 1450 - Bandwidth [mm]: / conveyor width [mm]: 500 - Installation location: / installation site: Before the - Packer - Container size: max. 8 x8 compartments max. 500 mm in running direction max. 400 transverse to the direction of travel The device has been store ...

American stove Heartland 6120EC original Stove ran only a short time because of moving to new apartment, it could not mitnehemen, me is unfortunately necessary to separate. Is stored Electric 400V hobs, oven and keep warm compartment New price at 7500 € Appointment for viewing by phone or by mail. When the load is helped. Private sale no returns

USED -Year of construction: 2019 -Operating hours: 1,110 -Very good condition - was only in use from November 2019 - June 2020. The Butler MiR is a user-friendly, efficient, mobile robot for the automation of internal transport and logistics solutions. It optimizes the work processes, releases employee resources and enables an increase in productivity and thus a cost reduction. The Butler MiR is one of the new, highly developed mobile robots that quickly generate income from the investment. Often the payback period is only one year. The robot's technology allows automatic scanning of the driving area and environments, as well as importing 3D drawings of the buildings. In addition, the built-in optical sensors and scanners enable collaborative operation, i.e. the robot can drive freely in dynamic environments with humans and other moving obstacles, as it automatical ...

LDS Here we offer an LDS shaker system. V780 Shaker Specification: 685 x 490 x 860 mm (HxWxL) Weight 381 Kg Sine force peak 5115 N Random force RMS 4226 N Acceleration peak 1.9 m/s Mass of the moving element 4.7 kg Usable frequency range DC - 4000 Hz Maximum load capacity up to 100 Kg Dimensions 714 x 890 x 490 mm Air cooler included (38 Kg) Type: V780 Amplifier Input supply – three-phase 50/60 Hz: 380, 400, 415, 440 V60 Hz: 480, 500 V Output power 5 kVA Nominal output voltage 100 V rms (sine) Continuous output current 50 A rms (sine and random) Output current 150 A for 100 ms Switching frequency 150 kHz Modulation range DC to 10 kHz Total harmonic distortion typically 0.15 % Input sensitivity – differential output 1.0 Vrms for 100Vrms output Input impedance 10 kΩ nominal Amplifier efficiency > 90% Module efficiency 93 % Signal-to-noise ratio§ > 68 dB ...

Technical specification:  - Working area: X-axis 600 mm - Working area: Y-axis  900 mm - Working area: Z-axis  100 mm - DSP controlling system - USB interface - Maximal moving speed: 10000 mm/min - Maximal working speed: 6000 mm/min -Spindle power: 2,2 kW, water cooling - Power connection: AC 230 V / 50 Hz Software -ArtCAM software - 32-bitni i 64-bitni Windows based software - Windows 7 - Windows 8 - G-Code (DIN 6625) - HPGL (. PLT) - Simulation

Fill 3D-Ultrasonic Cutter Here we offer you a Fill 3D ultrasonic cutting system. Fill 3D-ULTRASONIC SCHNEIDER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasonically excited cutting systems. Your advantages: Ergonomic feeding and unloading Easy creation of bleed programs (NC control) Space-saving system concept (as an alternative to the robot) High repeatability High process stability Easy and fast tool change Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with a small footprint and simple kinematics. Thanks to the Siemens 840 D CNC control, the trimming device can be programmed like a machine tool. Tool corrections or path changes can simply be carried out directly on the machine. As standa ...

Technical specification: - Working area: X-axis 600 mm - Working area: Y-axis 900 mm - Working area: Z-axis 120 mm - Working table dimensions: 720 x 1150 mm - DSP controlling system - USB interface - Maximal moving speed: 10000 mm/min - Maximal working speed: 6000 mm/min - Spindle power: 2,2 kW, water cooling - Spindle rotation: 24.000 rpm - Power connection: AC 230 V / 50 Hz Software: -ArtCAM software - 32-bit i 64-bit Windows based software - Windows 7 - Windows 8 - G-Code (DIN 6625) - HPGL (. PLT) - Simulation

Double crankshaft mechanical press RAVNE DE 315 2 crankshaft, closed type, simple action press DE 315 Manufactured by Zelezarna Ravne, Yugoslavia Press is in excellent working condition, has moving table and hydro cushion YOM 1990 Description Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 1400 mm Slider dimensions 2500 x 1400 mm Distance adjustment between table and slider 250mm Distance between table and slider in its lower and upper adjustment position 700mm Force of hydro cushion 8 tons Stroke of hydro cushion 155 mm Weight 75 tons

LATHE PONTIGLIA Leopoldo Manufacturer: ITALY YOM 1980 NEW ELECTRIC 2010 ( cabling, main motor drive, X Axis Servomotor) Chuck diameter 1200 mm Diameter in Gap 2000 mm X 1500 mm ( MOVING BED) Swing over bed 1250 mm Lenght 6 000mm / 9 000 mm machine weight 21 000 kg

Cutting sets and moving in snails Suitable for Stephan Machines

Table length: 800 mm Table width: 480 mm Longitudinal X: 760 mm Cross Y: 450 mm Vertical Z: 510 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc CNC Model: O-M MACH-id   5111 MAKE        Topper Taiwan TYPE          TMV 760 YOP            1997 SPECIFICATIONS Spindle Taper ISO/Bt      Bt 40 X - Trave          l760 mm bed / plano / portal / moving column      VMC Control      Fanuc O-M Y - Travel     450 mm Z - Travel      510 mm Table Length x Width       800 x 480 mm Table load in kG     500 Kg Spindle speeds / ranges     8000 Rpm ATC tool changer      24 Number of controlled axis      ...

MULTI RIP SAW type CML SCA 320 with rip trimming unit with two circular blades with adjustable interaxle ( one moving saw ) Technical Details : carpet width mm. 320 max. cutting heigth mm. 120 minimum length of pieces mm. 300 blades diameter : min.mm.250 / max.mm.350 maximum distance between two external blades mm. 320 feeding speed mt/min. 0 / 36 motor power Hp 40 net weigth kgs. 2000 volt. 380/50

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Table length: 500 mm Table width: 400 mm Longitudinal X: 510 mm Cross Y: 510 mm Vertical Z: 460 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mazatrol CNC Model: Matrix Nexus Mazatrol MACH-id       5093 MAKE          MAZAK TYPE           VARIAXIS 500 5X-II YOP              2007 SPECIFICATIONS Spindle Taper ISO/Bt       40 kW power on spindle        22 kW X - Travel         510 mm bed / plano / portal / moving column       5 Axis Control          MATRIX NEXUS MAZATROL Y - Travel         510 mm Z - Travel          460 mm Table Length x Width         500 x 400 mm T ...

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-1, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm:105 Spray weight gr: 4137 Spray volume cc: 4546 spray pressure possible: 1778 Dimensions and weights Machine weight Kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

Table length: 1300 mm Table width: 550 mm Longitudinal X: 1050 mm Cross Y: 510 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Mazatrol CNC Model: Nexus Matrix MACH-id    5071 MAKE        Mazak TYPE         Nexus 510C-II YOP           2007 SPECIFICATIONS Spindle Taper ISO/Bt    40 kW power on spindle      18.5 kW X - Travel      1050 mm bed / plano / portal / moving column VMC        Controll MAZATROL NEXUS MATRIX Y - Travel      510 mm Z - Travel      510 mm Table Length x Width         1300 x 550 mm Table load in kG     1200 Kg ATC tool changer      30 Number off controlled axis      3  ...

Krauss Maffei injection moulding machine Type: KM 1300-8000 MC-2, with Kuka robot Control: MC4 Built: 2003 Locking unit Locking power t: 1300 Opening path mm: 2250 Holm Measure mm: 1500x1250 installation height min/max mm: 800/1400 Plate size: 2140x1960 Spray unit Snail diameter mm: 115 spray weight gr: 4962 Spray volume cc: 5453 spray pressure to be: 1482 Dimensions and weights Dimensions LxBxH m: 12.16 x 3.49 x 2.58 Machine Weight kg: 60,000/37,000 Other Kuka robot Conyvor Band Cascades: 16 Core Trains: 7 (fixed side), 6 (moving side) and one pneumatic per side hot channel paths: 64

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

Cleaning machine for barrels and other utensils. Wax room, base frame and exterior cladding made entirely of stainless steel. High washing and rinsing performance thanks to hydraulically moving washing and rinsing system. This machine was used to clean 200 litres of barrels. With a rinse, 2 barrels can be cleaned. The machine is freely programmable

Micro hardness tester Vickers HV0,001 to HV 30 (depending on type) from 1 gram - all force levels force-controlled The FALCON 400 series are micro-hardness testers for a test force range of 0.001 to 30 kgf (depending on the type) for the micro Vickers, Knoop and Micro-Brinell hardness testing methods. The unique test force load system includes an electronic control system in the closed control circuit and sensor technology with force feedback. In addition to the electro-mechanical test force load, the FALCON is equipped with first-class mechanical and optical components. The innovative software functions of the I-Touch™ "control" allows the storage of results, creation and storage of test programs, overwashing of results (limit input), conversion to other hardness scales and curvature corrections for measurement on unplanned test surfaces. The digital / optical hardness impressio ...

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 0   CNC Brand: Heidenhain CNC Model: 3D Mill Plus MACH-id    5022 MAKE         Deckel Maho TYPE           DMU 50 T YOP             2000 SPECIFICATIONS Controll     HeidenHain 3D Mill Plus bed / plano / portal / moving column       VMC Spindle Taper        SK 40 kW power on spindle      13 kW X - Travel        500 mm Y - Travel        400 mm Z - Travel        400 mm Table Length x Width        700 x 500 mm Table load in kG         200 Kg Number off control ...

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Table length: 1000 mm Table width: 450 mm Longitudinal X: 1000 mm Cross Y: 450 mm Vertical Z: 600 mm CNC Brand: Heidenhain CNC Model: TNC 310 MACH-id   4184 MAKE        DUFOUR Vernier France TYPE         GD 258 TNC 310 YEAR        1999 SPECIFICATIONS X - Travel       1000 mm Y - Travel         450 mm Z - Travel          600 mm bed / plano / portal / moving column Horizontal & Vertical milling machine Controll      HeidenHain TNC 310 Table Length x Width     1000 x 450 mm Table load in kG   500 Kg Spindle Taper     ISO 40 kW power on spindle  6.6 / 9.3 kW Spindle speeds / ranges     4000 / 2200 Rpm Number off controlled axis  3  ...

Overall size: 1600x2000x1600 mm Table size: 1200x250 mm Moving rate: 500x250x300 mm

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

Table length: 1400 mm Table width: 550 mm Longitudinal X: 1050 mm Cross Y: 560 mm Vertical Z: 560 mm Positions ATC: 32   Positions APC: 0   CNC Brand: Fanuc MACH-id   4146 MAKE       Victor Taiwan TYPE         VCenter 105 YEAR        09.2000 SPECIFICATIONS X - Travel      1050 mm Y - Travel        560 mm Z - Travel        560 mm bed / plano / portal / moving column         VMC Controll      Fanuc Table Length x Width       1400 x 550 mm Table load in kG      750 Kg Spindle Taper       Sk 40 Spindle speeds / ranges       6000 Rpm ATC tool changer     32 Number off controlled axis    3

HORIZONTAL MULTIPALLET MANDELLI M7 WORK CENTRE CNC Model: Plasma Tool attachment: iso 50 Spindle power: 25Kw Spindle Rpm: 4000 Number of tools: 100 X-Axis Stroke: 1000mm Y-Axis Stroke: 800mm Z Axis Stroke: 1050mm Guides: flats Pallet size: 630x630mm Pallet type: indexed Pallet grades: 0.001 Multipallet: yes Multipallet pallet number: 6 Pallet system: Carousel Maximum load allowed: 1500Kg High refrigerant pressure: yes Chip evacuator: carpeted Presetting: yes Other technical data: MAXIMUM DIAMETER OF MOVING PIECE mm 1100 MEASURING SYSTEM X Y Z B OPTICAL LINE , ENCODER TOOL DIAMETER MAX mm 450 MAX TOOL LENGTH mm 600 MAXIMUM TOOL WEIGHT DAN 35 Machine equipment: PRESETTING SPURS OMP 60 RENISHAW CONTROL SYSTEM

Table length: 0 mm Table width: 0 mm Longitudinal X: 600 mm Cross Y: 700 mm Vertical Z: 600 mm Positions ATC: 120   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 430 MACH-id     4103 MAKE         DMG Deckel Maho TYPE           DMU 60 P Hi Dyn YEAR          2000 SPECIFICATIONS X - Travel    600 mm Y - Travel    700 mm Z - Travel     600 mm bed / plano / portal / moving column     5 Axis Controll      Heidenhain TNC 430 Table Length x Width       630 mm Table load in kG        600 Kg Spindle Taper      HSK 63 kW power on spindle     16 kW Spindle speeds / ranges       18000 Rpm ATC tool changer   ...

Used cutting machine Hundegger K1 Manufacturer: Hundegger, DE Type: K1 Built: 1998 Condition: used, in operation, good Available from: 06.2021 composed of: 1. Fully automatic wood conveying with feed roller conveyor 2. Lower table swivel crosscut saw 3. Universal milling unit 4 -axis 4. Combination support for horizontal tools 5. 2x Drill Rig - Drilling direction horizontal drill length: 6. 1x Chain slot unit 7. Combination support for vertically working tools with a servo drive, cross-moving on linear guides and up to 5 vertically working, hub-controlled tool slides 8. 2x drilling rig drilling direction vertically from below 9. 1x Finger cutter Vertical 10. Marking device 11. Fully automatic beam turning station 12. Transport and positioning device 13. Electronic control with operator put, on Windows XP

pressure:110 t passage width:1300 mm stroke:1500 mm Weight of machine approx.:12 t dimensions:ca. 2300 x 2090 x 4200 mm return capacity:11 t Max Working height:1500 mm pestle plate:1730 x 1100 mm table plate:1730 x 1100 mm table height over floor:700 mm column diameter:140 mm Thickness of ram plate:100 mm thickness of clamping plate:100 mm Noise Level (Max.):67 dB Color machine body:7035 RAL Color moving parts:2009 RAL Colour other components:7021 RAL Colour of balcony and casing:1021 RAL motor capacity:18 kW Approaching Speed max. :300 mm/sec pressure speed:15 mm/sec Oil Tank Capacity:150 l Siemens Control System:S7 1200

Optimize existing production line Carsoe Anytray Denester The automatic feeding of the AnyTray CleanLine denester from a buffer of full height tray stacks offers less manual intervention and lower operating costs. The AnyTray electrical buffer is easily integrated into an existing production or packing line. It includes an intelligent electrical control system and a hygienic design. This electrical buffer has few moving parts and low maintenance costs thanks to its design. Speed up to 120 trays per minute. Stainless steel Good working condition

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18 i MB MACH-id   4105 MAKE       TOYODA WELE TYPE         AA 1680 / FV 1680 YEAR        2012 SPECIFICATIONS X - Travel      1600 mm Y - Travel        800 mm Z - Travel         800 mm bed / plano / portal / moving column      VMC Controll     Fanuc 18 i MB Table Length x Width       1750 x 800 mm Table load in kG        2000 Kg Spindle Taper     Bt 50 kW power on spindle   15 kW Spindle speeds / ranges    12000 Rpm ATC tool changer      48 ...

Table length: 1000 mm Table width: 490 mm Longitudinal X: 800 mm Cross Y: 510 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 / 430 MACH-id   4090 MAKE      Bridgeport UK TYPE        VMC 800 - 30 Digital YEAR       2000 . 04 SPECIFICATIONS X - Travel       800 mm Y - Travel       510 mm Z - Travel       510 mm bed / plano / portal / moving column     Vertical machining centre Controll       heidenhain TNC 426/430 Table Length x Width        1000 x 490 mm Table load in kG       750 Kg Spindle Taper        Bt 40 kW power on spindle      11 kW Spindle speeds / ranges  &n ...

Table length: 1500 mm Table width: 660 mm Longitudinal X: 1270 mm Cross Y: 660 mm Vertical Z: 610 mm Positions ATC: 40   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Ultimax 4 MACH-id   4088 MAKE      HURCO TYPE        VMX 50 YEAR       2007 SPECIFICATIONS X - Travel      1270 mm Y - Travel      660 mm Z - Travel      610 mm bed / plano / portal / moving column     VMC Controll      Ultimax 4 Table Length x Width       1500 x 660 mm Table load in kG        1350 Kg Spindle Taper          Sk 40 kW power on spindle   18 kW Spindle speeds / ranges       10000 Rpm ATC tool changer       40 Cool ...

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

TRUMPF TruLaser 5030 Year of prod. 2007. Operational hours laser beam: about 22500 h Operational hours / machine on: about 60000 h Technical condition: good+. Machine under constant service care, all spare parts replaced on time. Recently replaced laser mirrors. The machine is still in production. Control: Siemens 840D Laser power: 5 kW. Maintenance-free turbine TruFlow 5000 Working range: 3000 x 1500 x 115 mm Quality sheet cutting: - black steel up to 25mm - stainless steel up to 20mm - aluminum up to 12mm Equipment: - precise sheet metal burning system - linear drives - conveyor for removing small details and sheet metal remnants - lighting of the working space - positioning laser diode - oil mist spraying - PierceLine system: the function of quick burning into the material, adjusting the laser power to the material being processed. Up to 90% shorter piercing time!  ...

Table length: 1500 mm Table width: 660 mm Longitudinal X: 1270 mm Cross Y: 660 mm Vertical Z: 610 mm Positions ATC: 24   Positions APC: 3   CNC Brand: _Unknown / Other CNC Model: Ulitmax 4 MACH-id   4089 MAKE       HURCO TYPE         VMX 50 S YEAR        2002 SPECIFICATIONS X - Travel      1270 mm Y - Travel        660 mm Z - Travel         610 mm bed / plano / portal / moving column     VMC Controll       Ultimax 4 Table Length x Width       1500 x 660 mm Table load in kG       1350 Kg Spindle Taper       Sk 40 kW power on spindle     18 kW Spindle speeds / ranges     15000 Rpm ATC tool changer&nbs ...

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle w ...