moving used for sale

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for project, but was never used. Private sale without warranty. Pick-up only: Mobile phone 015121271265 Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min  ...

For sale two (2) maschines made by Pallmann, one 132 and second 200kw for processing chipwood till saw dust in wet condition (this maschine has rottary kniwes moving on left side and sieve moving opposite and make super results. Price: 132kw = 20.000 EUR Price: 200kw = 39,000 EUR

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

CML moving blade multi-blade model SCA320R-T350 with: - 1 fixed blade + 1 movable blade with motorized positioning - 1 fixed laser + 1 mobile laser, for cutting line display - 350mm belt, useful cutting width 320mm - useful cutting height with movable blade 90mm (120mm without moving blade device) - main engine kW 22 / HP 30 - motorized lifting of the pressor - manual lubrication pump

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm stroke: 130 mm dayligth: 325 mm throat: 250 mm working feed: 10,0 mm/sec return speed: 100 mm/sec table width: 180 mm work height max.: 865 mm Control: M 9101 oil volume: 225 Liter engine output: 11,0 kW weight: 11.500 kg Dimensions (LxWxH): 4270 x 1500 x 2530 mm Furnishing: - HACO / Robosoft NC control, model M 9101 controller - with external display / screen - pivoting control, front left - electric back gauge (X axis) - with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis) - hydraulic upper tool clamping - manual table crowning, adjustment with hand crank - segmented upper and lower tools - free-moving 2-hand control - free-moving footswitch - rear protective device (self-made) - User manual in German Machinevideo : https://www.youtube.com/watch?v=TXQTytSd_6Y&feat ...

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for a project, but was never used. Private sale without warranty. Pick-up only Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Moving steady rest, moving steady rest, steady rest, lynette -Bezel: pneumatically exciting -Type: SLK 087-1070/3 -Rollers: cylindrical -Dimensions/clamping range: see photos -Dimensions: 365/225/H370 mm -Weight: 43 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/4.um.fp/D92.160/161 -Dimensions: 265/145/H145 mm -Weight: 3 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combined measuring device with data logger, anemometer, wind transmitter, wind speed sensor -Manufacturer: Thies, Windgeber 4.3350.10.000 -Measuring range: 0.3 to 75 m/s -Price: per piece -Number: 3 pieces -Dimensions: 200/210/H290 mm -Weight: 0.4 kg/piece

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device -with: measuring and control technology type M19 -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type No .: 6.618962.4 -Display range: 0 V - 500 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1.3 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 50 A - 300 A -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type no.: 4205 1021/1 -Display range: 0 V - 40 V -Installation dimensions: LxWxD approx. 140x140x90 mm -Dimensions: 144/144/H90 mm -Weight: 1.2 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x80 mm -Dimensions: 144/144/H80 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x103 mm -Dimensions: 144/144/H103 mm -Weight: 0.8 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 100 V - 500 V -Installation dimensions: LxWxD approx. 140x140x93 mm -Dimensions: 144/144/H93 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 V - 250 V. -Installation dimensions: LxWxD approx. 66x138x230 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H230 mm -Weight: 1.4 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 150 A -Installation dimensions: LxWxD approx. 66x138x175 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H175 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x175 mm -6 V 10 mA -Dimensions: 72/144/H175 mm -Weight: 1.5 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 75 A -Installation dimensions: LxWxD approx. 66x138x170 mm -Number: 2x available -Price: per piece -Dimensions: 72/144/H170 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 200 A -AC -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 0.7 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: 1.660711.2 -Display range: 0 °C - 600 °C -Installation dimensions: LxWxD approx. 66x138x165 mm -Dimensions: 72/144/H165 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Type: No. 6.620086.4 -Display range: 200 V - 240 V -Installation dimensions: LxWxD approx. 66x138x165 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H165 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: No. 6.660713.2 -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V 39 mA -Dimensions: 72/144/H192 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V -Number: 2x available -Price: per piece -Dimensions: 72/144/H192 mm -Weight: 1 kg

It is a CNC profile machining center with compact design Cabinet moving on X-Y-Z-A axes. The spindle unit is positioned and machining independently at any temperature from 0 to 180 degrees. This is the fourth axis feature. It can process all kinds of profiles such as PVC, iron, steel, copper, especially aluminum. Different types of milling bits are used according to the hardness of the alloy it processes. It works freely on aluminum profiles with its fast milling head moving on the steel body equipped with CNC control unit and servo motor and 7-position tool changing magazine. The CADCAM software is a customized tool for “ino machinery” profile machining centers. The pneumatic reference point at the head of the machine is automatically removed and determines the zero point of the profiles.Profile clamping pneumatic clamps are offered as standard in the machine in 6 piec ...

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

Glass Bottle Filler-Capper 400 bph for Beer, Fully Automatic - 2016 This very good condition filler-capper was built by Norwegian HH Engineering in year 2016 and it has been filling beer in 330ml and 500ml glass bottles. The line is very compact in size and it has wheels for easy moving. It has four vertically moving filling nozzles which are built as counter-pressure fillers and which then allow the customer to fill both carbonated and non-carbonated beer with the same machine. Filling nozzles have inbuilt air pre-evacuation system with CO2. Machine is also compatible with several bottle sizes as well as standard longneck 0.5l and 0.33 bottles. It has a single head crowner for 29 mm caps. Operation is controlled with a Allen-Bradley PLC. Manufacturer HH Engineering AS Manufacturing year 2016 Current status Dismantled Capacity 400 bph Bottle sizes 330ml and 500ml longneck  ...

Offer 23348 Specifications: - max. load capacity 1500 Kg - Face plate diameter 850 mm - Distance from floor to centre axis of rotation 800 mm - Rotary movement electr. infinitely variable 0.08 - 1.6 rpm - Right - + Left - Run - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirements Unit approx. W 850 x H 1450 x D 1000 mm - Space requirement: Moving unit W 850 x H 1450 x D 1000 mm - Weight of driven unit approx. 550 kg - Weight of moving unit approx. 400 kg

4 axis machining center Usefull capacity: 3130 x 1250 mm. (divided in 2 fields) Displacement in X: 3995 mm, Y: 1976 mm, Z1=343 mm Z2=185 mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 6 supports with vacuum cups, pneumatic clamping Vacuumpump 70 m3/h 6 fences at the rear 6 fences at the front 2 fences left, 2 fences right 1 connection for template 4 rails for panel loading with pneumatic lifting Laser positioning indicator for the vacuum cups Configuration: Main spindle with motor 9 kW, 1250-24000 r/min, air cooled, positioning axis over 360?, HSK63 taper 8 position toolchanger moving with the machining unit in X 8 position toolchanger positioned on the right 6 vertical drills in X, 6 in Y, 2 independant spindles 6 horizontal drills grooving saw in X an Y Woodwop 7.0 programming software aggregates are not included

table diameter: 4520 mm table load: 12000 t swivelling range: 110 Grad total power requirement: 44 kW weight of the machine ca.: / t required space: / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 ---------------------------------------------------------------------- ---- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH  ...

Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...

Borche BS 320 Plus injection molding machine Year of production - 2015 Clamping force - 3200 kN Screw diameter - 70 mm The machine has: 2 x core on the moving side 1 x pneumatic valve on the moving side 1 x solid side pneumatic valve Hydraulic system on a gear pump driven by a servo motor Closing system - knee Machine weight - 9800 kg All hydraulic lines in the machine were replaced on July 31, 2019

sheet width: 2540 mm plate thickness: 3,0 mm distance between columns: 2500 mm back stop - adjustable: 1000 mm upper clamping bar adjustment: 350 mm total power requirement: 4,62 kW dimensions: 3800 x 2300 x 1750 mm weight of the machine ca.: 3050 kg - lateral protective wall - 1x dual free-moving footswitch - 1x free moving footswitch - Electrically controlled back gauge with rear sheet metal support surface - with ball rollers - incl. new hydraulic pump (value approx. 4000€) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ra ...

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm Machine size (LxWxH):2200x4000x3415 mm high speed directl spindle motor:20000 1/min CNC controller:Heidenhain iTNC-530 Full 5 axis chip conveyor - auger:im Bett :Marposs mida laser 75P Tool setter:Marposs mida laser 75P Scales:X/Y/Z Achse von Heidenhain Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TN ...

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...

Manufacturer Ganner Maschineprotuktion, Austria automatic drilling of holes in panel parts of furniture, including drilling of sockets for installation of accessories, as well as automatic mounting of accessories. Distinctive features: Rigid stable design - a work table with PVC rollers, eliminating damage to workpieces when moving; - rack-and-pinion drive drive for feeding a drilling support, feed speed up to 75 m / min; -controlled axis Y of the drilling support allows you to process workpieces with a width of 130 mm to 700 mm; -controlled Z-axis of the drilling support allows drilling to a depth of 35 mm (drill length 70 mm), with the possibility of through-hole drilling; -controlled X axis of the longitudinal support with rack and pinion drive and linear guides, speed up to 120 m / min for moving and positioning workpieces with lengths from 250 mm to 2300 mm; -controlled Y a ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

CNC processing centre with 5 axes Brand: Cosmec Type: Conquest 715 New machine Just an example for a configuration, other equipment is available on request: High-precision CNC - centre with camera centering system. Ideal machine for milling works in digital print, wood- and plastics as well as in the advertising technique Gantry drive system 5-axis main spindle complete interpolating Moving route: - X - axis 4.850 mm - Y - axis 2.630 mm - Z - axis 880 mm Working table: Vacuum grid table system, made out of Sandwich-Bakelit and, consisting of: - 1 Upper plate with grid 50 mm, also the use of COSMEC vakuum cups is possible (vacuum cups optional available) - 1 Lower plate with rectangular chanels for ideal vacuum distribution Dimensions: X - axis 4.210 mm Y - axis 2.210 mm Table can be split in 2 working fields Each field with 3 workpiece stops in X - d ...

CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a stro ...

Cutting Height - 250 cm, with small changes even up to 300 mm. Width - 450 mm. Feed continuously, up to 40 m / min. 2 moving sockets for 3 blades each and one middle socket is possible. Engines - 2 pc. each 45 kW Complete with round wood feeder. Wood rotating device and centering. Automatic remote control.

Item No. 1000-79 Measuring machine in moving portal construction Make: Zeiss Type: MC 850 Control: Eight-bit control / control cabinet 92 Software: UMESS / ST Table top in granite Measuring range X = 850 mm Y = 1200 mm Z = 600 mm Measurement uncertainty U1 (1) : 2.5+L/250 U3 (1) : 2.8+L/200 Resolution 0.5μm

Which cups can be closed? plastic or cardboard cups (up to approx. 95 mm) are sealed with an aluminium board, plastic board or paper board. What is the working swell of the hand sealer? Pre-filled cups are inserted by hand into the cell board and covered with a board. By moving the board, the cup to be sealed comes under the seal head. When the seal is triggered, the loose board is now hot-sealed on the cup. In the meantime, the next cup can be placed in the other cell and provided with a board. Setting the seal: The desired seal temperature can be set via a text display. In addition, the duration of the sealing process can be determined individually. This makes it possible to seal different cup or board materials with different parameters. Format change: A format change of e.g. 75mm on e.g. 95mm can be done easily and quickly. Power: approx. 400 sealing processes/hr Pow ...

Container filling system Turret with horizontal Rotary and longitudinal moving conveyor on sturdy galvanized frame, swivel bearings. Incl. support climbing belt and tied up to the automatic filling of three large containers. PLC control Distribution belt gear motor 2 .2kW / conveyor width 900 mm Achabstand 5500 mm Drive rotation 0, 6kW Rotation drive +/-90 ° Climbing belt conveyor width 600 mm / distance 4000 mm / drive 1, 1kW High belt conveyors conveyor width 600 mm / distance 4700 mm / drive 1, 1kW Colour RAL 9006 / White aluminium System now available Price and further details on request

Type of machine: KM 200-1400 C2 Year of construction: 2000 Shipping time: Immediately Cargo base: From site Control type: MC4 Screen text: German Hours of operation: 57000 h Price: On request Technical details Clamping unit Clamping force: 2000 kN Tool opening force, Max: 101 kN Driving force open movable plate: 50 kN Driving force close moving plate: 42 kN Mounting plate (h x v): 915 mm x 915 mm Clear width (h x v): 560 mm x 560 mm Tool unclamping stroke: 700 mm Min. mould installation height: 350 mm Opening width: 1050 mm Ejector stroke: 200 mm Ejector force forward/back: 58/28 kN Injection unit Screw diameter: 55 mm Ls/D ratio: 23 Injection pressure: 2380 bar Displacement: 570 cc : Shot weight PS 519 g Injection power: 713 CC/s Screw speed: 259 1/min Plasticizing power Max: 49 g / s Nozzle system power: 110 kN Electro-hydraulic equipment Pump motor power: 45 kW Installed power: 23 kW  ...