moving used for sale

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Centre height: 145 mm -Plating: Brass -Dimensions: see photos / technical drawing -Dimensions: 400/130/H380 mm -Weight: 13 kg.

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm -Weight: 2.9 kg

Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Dimensions: 220/195/H340 mm -Weight: 8 kg

Bezel, moving bezel, steady rest, lynette -Bezel: max. aperture Ø 145 mm -Centre height: 190 mm -technical drawing: in the photos -Dimensions total: 310/115/H340 mm -Weight: 21.6 kg

Bezel, moving bezel, bezel, steady rest, lynette -Bezel: moving -Centre height: 185 mm -Edition: Brass -Dimensions: see photos / technical drawing -Dimensions: 345/70/H370 mm -Weight: 7.7 kg.

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Traversing centering tip: MK5 mount, 2 pieces -Type: 1x without type designation / 1x IAMU-BLAJ-CM5-STAS-7628-74 -Price/Fee: complete -Transport dimensions: 267/180/H90 mm -Total weight: 7.6 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Lenze ABW, live centering tip -Type: ZN 204 -Recording: MK4 -Dimensions: Ø 69 x 210 mm -Weight: 2.1 kg

Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 250 mm -Weight: 15 kg

Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 70 mm -Edition: Brass -Hole spacing: 295 mm -Peak height: 135 mm -Weight: 4 kg

Bezel, moving bezel, bezel, setting stick, lynette -Max. passage: Ø 80 mm -Edition: Brass -Hole spacing: 210 mm -Peak height: 135 mm -Weight: 8 kg

In working order. Electricity needs to be checked! New tires, new LED bar lighting at the rear. Auction-ID: A3-43511-21207

Manufacturer: INDEX Year: 2005 Type: Moving spindle CNC lathe with motorized tools and C-axis Numerical control: Siemens Sinumerik 840D Powerline Chuck: Ø 160 mm Max. rotation diameter: Ø 180 mm Strokes: X-axis 520 mm / Z-axis 200 mm Fast feeds: X/Z 40 / 30 m/min Moving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 Nm C-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30 Motorized tools: up to 6,000 rpm – 8.5 kW Power supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kW Weight (kg): approx. 4500 Auction-ID: A1-44765-273

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

Moving bezel, tracking bezel, setting stick, lynette -max: Passage: Ø 140 mm -Edition: Red brass -Hole spacing: 335 mm -Peak height: 215 mm -Drawing with the photos -Dimensions: 450/100/H540 mm -Weight: 26 kg

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Manufacturer: INDEX Year: 2005 Type: Moving spindle CNC lathe with motorized tools and C-axis Numerical control: Siemens Sinumerik 840D Powerline Chuck: Ø 160 mm Max. rotation diameter: Ø 180 mm Strokes: X-axis 520 mm / Z-axis 200 mm Fast feeds: X/Z 40 / 30 m/min Moving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 Nm C-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30 Motorized tools: up to 6,000 rpm – 8.5 kW Power supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kW Weight (kg): approx. 4500