moving used for sale

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Year of construction1995 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill MaterialStainless steel Fine Impact Mills Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Information Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

Vibrator Reinbold Type: AZR 600 Year of construction: 04/2020 as good as new - only 436 operating hours Hydraulic moving floor Feed opening approx. 600 x 900 mm with top-mounted hopper 1200 x 1000 mm Filling height approx. 1610 mm Hopper capacity approx. 0.6 m³ Working width of the rotor approx. 570 mm Diameter of the rotor 252 mm Power main motor 18.5 kW Rotor speed 93 rpm. 30 Circular Knives Screwed knife carrier 2 counter knives – clearing knife V 8 Screen perforation 20 mm, replaceable Weight 1300 kg

Code: 0230 Brand: GMC Model: KGS 400 E - CE Standard Manual vertical panel saw for cutting wood panels, blockboard, coated panels, plastic materials, aluminium, non-ferrous metals, various materials, sandwich panels, polycarbonate, compocel, pet foam, polypropylene, etc. - CE Standard Technical data: Cutting length mm 4200 Cutting height mm 1900 Maximum cutting thickness mm 50 Blade diameter mm 250 F 20 Motor power Hp 4 (Kw 3) Support for small pieces Moving frame Support rollers for the sliding of boards Overall dimensions of assembled machine: mm 5300 x 1400 x 2830 h Overall dimensions for transport : Frame mm 5020 x 450 x 2250 h - Beam mm 2800 x 850 x 850 h Weight kg 650

bore capacity in steel (diameter): 40 mm throat: 315 mm bore stroke: 200 mm taper MK: 4 speeds: 12: 56-1120 U/min bore capacity in cast iron: 50 mm table-size: 700 x 450 mm Distance spindle/table max.: 710 mm total power requirement: 4/3,43 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1,14 x 0,7 x 2,58 m Electric 380 Volt: Thread cutting device: Croll-moving table: Vice: BB 175 mm Heavy gear drill with automatic spindle feed, 2-stage motor, 12 speeds, thread cutting device with Re-Li barrel, height-adjustable drill head and work table. Sliding cross table with locking make Alzmetall Mod. 6000PR, 750 x 420 mm table size, travel x/y = 400 x 200 mm. Machine dealer with own stock of 1600 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal milling machine Versamatic 750 Rambaudi) with fixed bench with crosspiece and movable table with universal revolving heads. Working in excellent condition. This new series is part of the range of universal milling machines for processing medium/large parts such as molds and equipment. An exclusive feature of this model is the possibility of resuming processing in the transverse axis by moving the crossbar forwards (jump) or backwards (displacement) by 300 mm. without compromising torsional and flexural stability. The engines are 15 KW and 22 KW., the ranges available from rpm from 2000 to 4000. The wide choice of types of universal heads, from simple manuals to the version indexed with the continuous C, gives a notable flexibility of use. The machines can be completed with automatic tool changers, pick-up type table or external wheel with service shuttle, with saf ...

2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters

Wet or dry milling line capacity 60-65 m3/h Hammermill Grindingplatemill Rematec RPM 1000 electric motor 250 kW, • screwinput 3 × 3 kW • hammers made of wearresistant material • grindingplates casted of wearresistant material respectively hardened material Feeding container with moving floor Screw conveyor feeding rotary disc screen Screw feeder to screwinput RPM 1000 Screper conveyor

MIR SPA brand RMP 830 model Year 1998 Current status In operation Overall dimensions 11830 x 2225 x 2820 mm Weight 42000 Kg Tonnage 830 Column passage 930 x 930 mm Screw diameter 90 mm Calculated injection volume 2735 cm3 Min/Max mold thickness 350-1000 mm Robot interface Euromap 12 YES Jack YES Moving floor stroke 1030 mm

Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 5205200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.

Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate

ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...

Automatic line for packaging products in shrink film Kallfass Compact 450. 1. Appointment. The line is designed for packaging products in shrink film. 2. Working principle. Products from the conveyor of the production equipment enter the feeding conveyor of the packaging line. On the infeed conveyor, the product is aligned along the line of motion and then enters the inlet conveyor of the film packaging section. In the packaging section, the products, moving along the introductory conveyor, enter the inside of the half-sleeve of the packaging film, and then move along with the film to the zone of the transverse knife. The cross cutter cuts the film to a predetermined length while sealing it. Further, the product in the film passes to the output conveyor, where the longitudinal knife cuts off the side of the film, also sealing it at the same time. After that, the completely ...

Packing machine with bottom foil feeder - 3 servo motors and a printer. Machine Specification: Type: 350X Film width: max. 350mm Package length: 90 - 600 mm Package width: 30 - 160 mm Product height: max. 70mm Foil roll diameter: max. 320mm Packing capacity: 30 - 120 packages/min. Film location: lower film feeder Packing materials: OPP, OPP/CPP, KOP/CPP, ALU-FILM Controls: TOUCH SCREEN touch panel Type of drive: 3 x servo motors Photoelectric sensor: Yes (work with printed foil) Power: 220V, 50/60 Hz, 2.4 KW Machine size: LxWxH - (L)3836 x (W)890 X (H) 1079mm machine weight: 350 kg An advanced high-speed product packaging machine (with bottom foil feeding) is suitable for food products (e.g. chocolates, bread, fingers, sandwiches, vegetables such as celery, dill, greens) and industrial products (e.g. packing masks, sockets / electrical switches, etc.). Packing l ...

0: 4000 mm Working height: 2200 mm 0: 300 - 800 mm Dimensions (length / width): 4800 x 900 x 2500 mm Glazing and control press RU-VGPA 4 for glazing, sealing and final inspection. RU-VGPA4 glazing and control press Length 4800 mm, width 900 mm, height 2500 mm, System height 1900 mm, press beam height 2200 mm. System part covered with felt. Installation area as a roller conveyor, Lifting device from 300 to 800 mm. Two pneumatically foldable and movable press beam. Simultaneous, synchronous folding and moving the press beams over a single Foot valve, therefore requires the least amount of time Opening and closing the press. Safety control when building up pressure. (Technical description according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Functioning: You just have to put the entire bar, minimum 800 and maximum 7500, it machines it, cuts it automatically and the finished bar comes out, completely finished ready to assemble. Characteristics: 1. Automatic loading system for whole bars 2. Fastening and moving the bar in production to the soundproof booth 3. Drilling and milling with 4 chucks at any 360º degree 4. Electronically variable angle cutting between 22.5º and 157.5º 5. Automatic extractor of the finished profile to the unloading warehouse 6. Printer to label finished profiles Computer with Windows operating system

Code: 0237 Brand: STRIEBIG - SWITZERLAND Model: 6220/AV Automatic precision vertical panel saw for cutting wood panels, blockboard, coated panels, plastic materials, aluminium, non-ferrous metals, various materials, sandwich panels, polycarbonate, compocel, pet foam, polypropylene, etc. Technical data: Automatic vertical and horizontal movement Cutting dimensions mm 5300 x 2200 Cutting depth mm 80 Blade diameter mm 300 - Rpm 4800 Motor power Hp 7,5 Feed speed mt/min 11/17/22/33 Possibility of working in manual mode Rollers on table for moving panels Adjustable fixed points for repetitive cuts Installed power Kw 5,8 Overall dimensions mm 6335 x 1300 x 2770 h Weight kg 750

Tower with Ramo TPC gantry N°120 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, - 28 KW DC spindle motor at a reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor, disc ...

RAMO tower with TPC gantry No. 119 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, -28 KW DC spindle motor at the reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor,  ...

Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.

Ibarmia ZVH 45/L 1600 moving column machining centre :::SPECIFICATIONS::: CNC Model: Siemens - CNC Version: 840 D - Tool Holder: ISO 40 - Spindle Power: 18.5Kw Spindle speed: 10000 - Number of tools: 60 - X axis stroke: 1600mm - Y axis stroke: 800mm - Z axis stroke: 940mm Rapid feeds for linear axes X Y Z: 30m/min Fourth axle head: yes Fourth Axis Head Type: Continuous Rotary Table: Yes Rotary Table Type: Continuous Table size: 800mm High refrigerant pressure: yes Chip conveyor: belt conveyor Machine equipment: Optical scales :::D DIMENSIONS AND WEIGHT::: Length: 6750mm Width: 4200mm Height: 3600mm

Description: Year of construction: probably 1986 Adjustment range: In the X-axis (table slide): 900 mm In the Y-axis (sanding head): 600 mm In the W-axis (moving crossbeam): 635 mm Feed speed: In the X- and Y-axis, direct current drive, infinitely variable: 5 - 2500 mm/min In the W-axis, three-phase drive: approx. 800 mm/min Measured value display: Smallest display unit: 0.001 mm Zero point can be selected as required Positioning accuracy (basic deviation X, Y): 0.004 mm Table: Usable table surface: 1020 x 860 mm Permissible table load: max. 800 kg Width of the T-slots: 14 mm Number of T-slots: 7 Distance between the T-slots: 100 mm Working range of the sanding head: Grinding spindle speeds, infinitely variable with electric motors: 4500 - 80000 rpm With air turbines up to 100000 and 160000 rpm Planetary speed, infinitely variable: 5 - 250 rpm Stroke of the grinding spindle sleeve: max.  ...

Shredding chippers for scrap wood Low-speed with moving floor Rotor width 9th 600 mm 18.5kw motor

Key data: 530 mm, 3000 mm

Turning length: 3000 mm Rotation diameter: 530 mm above bed / 315 mm over cross slide Control: Fagor 8055 Spindle speed: 2,000 rpm min. max. Spindle bore: 105 mm Tool turret: 8 positions Equipped with: - 2 fixed bezels - 1 moving bezel Country of origin: Spain Engine power: 11 kW Machine weight: 4000 kg Machine LxWxH: 4000 x 1700 x 1800 mm

Key data: 1250 , 640

HYDRAULIC DOUBLE-ACTING DIE FORGING HAMMER HOU 160 equipped with ejector Blow energy (with installed upper die with nominal weight): 16 [kJ] Nominal weight of upper die: 100 [kg] Blow frequency at nominal capacity approx. 95 [1/min] Ram velocity: 5 [m/s] Ram depth: 460 [mm] Ram weight: 1250 [kg] Ram stroke max.: 640 [mm] Ram stroke min. to reach max. blow energy (distance billet to upper die): min. 480 [mm] Max. die height without dovetails (incl. billet): 320 [mm] Min. die height without dovetails: 160 [mm] Daylight between guides: 580 [mm] Width of frame base: 2290 [mm] Depth of frame base: 1250 [mm] Frame weight: 24 [t] Total weight approx.: 32,5 [t] Total mass to be absorbed approx.: 33 [t] Moving mass approx.: 1350 [t] Height above floor level (assuming insert height 700 m) approx.: 4310 [mm] Total height approx.: 5000 [mm] Main motor capacity (with 400 V / 50Hz) ...

Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The documentation (Manual, CE ...

Vertical cartoning machine for bag products, make Pamatech, year of construction 2008, For packaging products in cardboard boxes with a conical top, For product format: L x W x H: 186 x 160 x 30 mm, Mechanical performance of the packaging machine: approx. 55 packs/min., Machine dimensions: L x W x H: approx. 3,000 x 1,600 x 2,210 mm, The system consists of a rotary indexing table with six stations:, 1. Blank magazine with erecting station, 2. Closing the bottom with hot glue, product filling, The product can be filled by hand or by means of a feed belt, 3. Pre-break for conical folding box, 4. Reserve: Optional Seal Standard Packing, 5. Glue and press the lace closure with hot glue, 6. Unloading station with ejector on chute, The blanks are pulled off an inclined magazine and erected in double transfer handling. The magazine has adjustable side guides and moving supports to optimize slid ...

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

Description: • , Console , table 'K'  ,  ,- 8 clamping consoles ,  ,  ,- 8 pneumatically lowerable longitudinal stops (rear stop row)  ,  ,- 8 pneumatically lowerable longitudinal stops (centre row of stops)  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the right working field  ,  ,- 1 pneumatically lowerable side stop ruler  ,  ,  , for the left working field  ,  ,- ,electronic surveillance of all stop cylinders  ,  ,- 6 Workpiece feeding rails , to ease placing of heavy workpieces attached to the side of the ,  ,  ,  ,  , consoles 1, 3 ,4,5,6 and 8 , - ,LED displays for fast, simple positioning of vacuum clamps and consoles. Chip conveyor belt integrated in the machine frame work table: X = 4500 mm , Y = 1500 mm , Z = 125 mm.  ...

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture

Used Isobaric Filling Machine Cobert Exacta up to 1600 bph Introduction to the Filling Machine Cobert Exacta The Cobert Exacta isobaric filler with its 16 taps and advanced features stands out as a cutting edge solution in the industrial bottling field Technical Specifications Equipped with filling taps featuring pre evacuation and degassing the Cobert Exacta ensures precise and uniform bottle filling Additionally the pneumatic piston system for bottle lifting integrated with an air recovery mechanism guarantees efficient and reliable operation Moreover the presence of a vacuum pump optimizes the filling process maintaining high standards of quality for the final product Furthermore the external tap washing device contributes to the cleanliness and hygiene of the machine essential for safe and compliant production Performance and Functionality Moving on the Cobert Exacta offers variable  ...

Description: demonstration machine Speed in 6 levels 125 - 2000 rpm. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. ( Fixed bezel. Moving bezel. 4-way steel holder. Spreader tub. Back wall. Spindle protection. Hardened bed rails. Longitudinal feed with left / right switching. Set of change gears. Associated tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 125 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MT 2 MT Tailstock quill stroke 65 mm Connection voltage 230 V. Total power requirement 0.8 kW Approx. Onsite Dimension. (l x w x h): 1,250 x 600 x 600 mm, weight approx.: 135 kg

Description: SW BA 40 Vertical moving column machining center with swivel bridge, YOM 2000 CNC control SIEMENS 840D retrofit in 2014 WORKSPACE X-axis travel: 3300 mm Y-axis travel: 620 mm Z-axis travel: 800 mm (only with the swivel bridge dismantled) TABLE Clamping surface: 3500 mm x 650mm Clamping surface with dismantled swivel bridge 1600x650mm SPINDLE Speed ​​range up to: 10,000 rpm Tool holder: ISO SK 40 FINAL DRIVES Rapid traverse: 25000 mm/min TOOL MAGAZINE Magazine type: chain magazine Number of tool positions: 60 ELECTRICAL CONNECTIONS Connection voltage: 400 V Mains frequency: 50 Hz z-motion: 800 mm, x-motion: 3,300 mm, y-motion: 620 mm, control: Siemens 840 D, retrofit 2014, table surface area l x w : 3500x650 mm, taper: ISO SK40, toolchanger positions: 60, turning speed range: 1,000 rpm, rapid motion: 2,500 m/min, weight approx.: 17,500 kg, Approx. Onsite Dimension. ...

Description: Simec fully automatic circular saw machine typ MEC 120 BM1L CN Round tube min Ø 12 mm, max Ø 100 mm Square tube min 12x12 mm, max 100x100 mm Rectangular tube min 12x12 mm, max 120x80 mm Bars min. Ø 10 mm, max. Ø 45 mm (carbon steel material) Min. cutting length 10 mm Max. cutting length (standard) 3000 mm Cutting tolerance +/- 0.25 mm Cutting angle +/-60° Blade diameter da Ø275 mm a Ø350 mm Cutting speed da 30rpm a 200rpm Feeding gripper speed 1.5m/s Blade motor 5,5kW with inverter Cutting plane height 900 mm Max. clamp opening 130 mm NC gripper travel: 2000mm stroke with recirculating ball screw, driven by a brushless motor Easy jaw changeover for quick replacement Double clamp closing on both sides of the blade Central lubrication of moving parts Hydraulic closing of clamps and gripper Vertical head travel with recirculating ball screw Blade diameter: min. ø275mm  ...

Overview The isobaric filler ISO 4/1 from Italian manufacturer Barida was built in 2017. The machine is available because the seller is moving to another facility.  Technical Details  Production: 450-580 bph (0.33l)  350-450 bph (0.5l) 280-350 bph (0.75l) Suitable for bottle format: 0.33l  If you want to use 0.75 bottles, you only need the star for the capping head. The filling and capping heads can be easily adjusted 26mm crown cap - possibility to adapt to 29mm  User manual  Machine dimensions (LxWxH): 1994 mm x 944 mm x 1914 mm (with feet: 2039 mm)   Machine weight: 950 kg 

Used Filling Monoblock OCIM 24 32 8 up to 10000 bph The OCIM 24 32 8 filling monoblock stands as a pinnacle in bottling technology It offers an unparalleled capacity of up to 10000 bottles per hour Crafted by OCIM in 1998 this machinery embodies reliability and efficiency Specifically designed to cater to the demands of filling glass containers particularly those housing oil products Technical Details At the heart of this monoblock lies its rinser equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers Operating with precision the rinser utilizes compressed air for treatment guaranteeing optimal cleanliness throughout the filling process Moving seamlessly to the filler which serves as the core component of the monoblock we encounter a marvel of engineering Boasting 32 filling valves this monoblock is capable of handling even the most demanding bottling ...

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Technical specifications: machining centre with fixed bridge and 2 moving plates dimensions for each working table: X = 2340 mm Y = 2520 mm working tables can be configured independent (pendular cycle) or single zone with coupled plates by CN the work surface of each of the working tables is constituted by a Lignostone vacuum table with a grid for the installation of the workpiece-holding joints numerical command: AB OSAI10/310 axis strokes: X = 4800 mm Y = 3200 mm Z = 250 mm 8 vertical milling motors 8kW, ETP axis, 18000 rpm (ref axe: TRIAX-004-365) 3 vacuum pumps Becker, 3x250 m³/h electrical panel with air conditioning, dimensions: 1400 x 800 x H 2.100 mm connection 400V, 50Hz, 100 KVA (150A) average working power = 35 kW CE mark vacuum pump: 250 m³/h, serial number: 1,785, total electrical load: 35 kW, 5-axis machining: No, Number of vacuum pump ...

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

sheet width: 1050 mm plate thickness: 5,0 mm pre-bending: 4,0 mm diameter of upper rolls: 110 mm diameter of lower rolls: 115 mm speed: ca. 6,0 m/min work height max.: 890 mm voltage: 400 V total power requirement: 1,1 kW weight of the machine ca.: 1700 kg range L-W-H: 2100 x 550 x 1050 mm Furnishing: - robust electric three-roller drive - asymmetrical roller arrangement - Electrical delivery of the rear/side roller Can be moved via electric button with analogue position display - free-moving operation Clockwise / counterclockwise rotation of the rollers - Manually swing-out top roller - Conical rounding by tilting the rear/side roller - manual delivery of the bottom roller by handwheel - Central lubrication Machinevideo : https://www.youtube.com/watch?v=0JfDoxa7aLM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: maximum loading capacity 14 kg maximum range 1,100 mm arm weight: 32.6 kg. control box: 13.8 kg. rated voltage 100 V-240 V frequency 50/60 Hz, phase 1 full-load current 16A short circuit rating 300 A with 2 gripper arms SCHUNK and integrated camera system plus all safety functions max speed: 1.1 m/ repeat accuracy +/- 0.1 mm. 6 degrees of freedom 6 rotation axes. with integrated color camera for AI Functions incl. remote control and PC with robot software licence installed Note: the robot can also be adjusted manually. The robot was used with no payload in the Showroom. Aprox. 500 h of joint moving time. More details see PDF (1-12 collaborative_robots_datasheet_en.pdf) Approx. Onsite Dimension. (l x w x h): 1,600 x 800 x 2,200 mm, weight approx.: 120 kg

Basic machine complete with: - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Cnc through feed drilling machine Brand: Cosmec Type: Star new mashine 1 x infeed air cushion table of 1500mm 1 x outfeed air cushion table of 1500mm Maximum workable piece in width 950mm Minimum workable piece in width 60mm Maximum workable piece in lenght, infinite Minimum workable piece in lenght 250mm 1 x Moving gripper 1 x Stop for reference in entrance 1 x Laser to detect the pieces lenght 1 x Drilling unit with 10 vertical + 6 horizontal spindles + saw in X 1 x Router of 8hp with ISO30 connection 1 x 13 points semiautomatic lubrification 2 x Vertical clamps with double row of pression each one with a pressing bar + a line of pressing wheels 1 x PC with 21 screen 1 x Cosmec interface Seaworthy packing Optional: 1 x 6 positions tool changer

CNC punching machine Brand: Vitap Type: MICRA New machine High-Performance CNC machine for the production of acoustic panels with Micro-Perforation - Every 4 seconds the punching of 1.000 up to 2.331 holes are possible (depending on the workpiece) 3 controlled axes: - X-axis: drive via 2 motors and planetary reduction gear, guidance via pinion and rack - Y-axis: drive via 1 motor and planetary reduction gear, guidance via pinion and rack - Z-axis: drive via central hydraulical unit Easy handling with TPA control - Virtual display of programmed punching holes in the CAD environment - Optimization software for the working process - LCD TFT Monitor 20 - USB port - Basic Version CAD TPA - Macro programming Processing head - 5mm grid in X- and Y-direction - Punch depth: 3mm - Changable punching tools The processing head can optionally be customized  ...

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

CONTROLS   CNC controls HEIDENHAIN ITNC 530 BASIC DESIGN   basic design: moving column WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 3000 mm   Y-axis travel: 1000 mm   Z-axis travel: 700 mm   rotating range B-axis from: 105 °   rotating range B-axis up to: -105 ° SPINDLE / HEAD   spindle revolutions (max): 18000 /min   tool fixture: HSK A63   drive power: 23 kW TOOL MAGAZINE   magazin type: chain magazine   number of positions: 48 ELECTRICAL SPECIFICATIONS   total power consumption: 42 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8500 mm  &nbs ...

new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...

FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 180 mm   length min.: 3000 mm   lenght max.: 10000 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 50 mm   external diameter max.: 168 mm   length min.: 4000 mm   lenght max.: 12500 mm CHARACTERISTICS DRAWING MACHINE   force: 2000 kN   drawing length max.: 12500 mm   number of parallel trains / strands max.: 1   speed max.: 40 m/min   etching device: yes Function: Automatic (towing carriage moving forwards and backwards, front bench horizontal)Products: Round tubes, precision tubes, cardan shaftsmax. drawing rod / pointed end diameter: 120 mmmin. drawing rod / pointed end diameter:  33 mmmax. drawing rod / pointed end length: 240 mmmin. drawing rod / pointed end length: 20 ...

description: Fire protection closure for wallcrossing -Intumescent sealing system -No clearing of the closing area required if the conveyed material is non-combustible -No moving sealing elements -Small space requirements on the wall plate -System 1: 720 x 480 mm -System 2 : 440 x 480 mm All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we ca ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Single sided edge banding machine Brand: IMA Type: COMPACT PC-6220 F Year: 2000 Left hand machine Workpiece transport via a driven transport chain and adjustable top pressure Beckhoff control Need of space LxWxH mm: 7400x1500x2000mm Weight: approx. 3600kg Technical data: Edge material: a) Veneer/coil and strip ware, b) PVC/coil and strip ware c) Solid wood strips min. edge height = approx. 14 mm max. edge height = approx. 55 mm min. edge tickness = approx. 0,4 mm max. edge thickness = approx. 20 mm min. panel thickness = approx. 10 mm min. panel thickness = approx. 16 mm at use of the multi function unit max. panel thickness = approx. 50 mm min. panel width = appprox . 60 mm min. panel length = approx. 150 mm max. strips = approx. 20x50 mm Panel supernatant from the chain conveyor = approx. 35 mm Pneumatic connection: approx. 7 - 8 bar The basic  ...