mov used for sale

1 factory-tested ceiling crane girder Lifting capacity 3000 kg Wingspan approx. 6,800 mm Hook way approx. 8,000 mm Make MAN GHH Year of production/workshop testing 1988/2016 equipped monorail trolleys, short type, freely movable floor control Working speeds: Hoist around 0.8/8.0 m / min Trolley gear approx. 4.0/16.0 m / min Crane chassis approx. 8.0/32.0 m / min

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

1 factory-tested, very well-preserved single-girder crane Lifting capacity 3,200 kg Span approximately 6,000 mm hook path Max 12,000 mm Make DEMAG Year of production/workshop test 1993/2016 with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist CA. 1.0/6.3 m / min trolley gear approx. 14.0 m / min crane chassis 10.0/40.0 m / min

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

2 factory-tested, well preserved double girder cranes Load capacity 5000 kg Wingspan approx. 13.630 mm Hook way approx. 4,000 mm Fabrikat MAN-SWF Year of production/workshop test 1995/2016 Cranes, floor control, freely movable equipped with SWF double girder trolleys, travels to the lower straps of the crane bridges Working speeds: Hoist approx. 0.8/5.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Specifications / Technical Data S-400/T CNC portal fraesmachine / engraving machine, TUeV certified Already more than 4500 CNC machines of type High-Z sold worldwide ! With the T-variant of the High-Z CNC-Fraesmaschine you acquire old-fashioned technology with the certain I-T-Tpfelchen The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC fraes machine achieves fantastic accuracy and an almost unmeasurable reversal of about 0.01mm due to the ball-circuit spindles used. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. Thus, engraving and fraes speeds of up to approx. 4500mm/min can be realized and fast-moving speeds up to approx. 7000mm/min. This is just as applicable in the industrial sector for work such as engraving, frause, drilling, measuring, cutti ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the ...

1 factory-tested, well preserved double girder crane Load capacity 5000 kg Span width 14.780 mm Hook path maximum approx. 8,000 mm Make RÖTTGER/Demag Workshop examination 2016 Floor control freely movable with DEMAG double girder trolley, Working speeds: Hoist approx. 0.8/8.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

The quasar 2,5 kN is a product with the latest developments, designed and built to highest standards of quality and equipped with most advanced techniques. The test programs can be created with a degree of freedom not known otherwise for material testing machines according to own requirements and serve the control (speed, strength, stress, deformation, elongation Le ·) L0, strain LC | LV, manual movement, cyclical) of the machine as well as the evaluation and logging of test results. The software is a complete software for all typical obtained from static universal testing machines tensile, pressure and bending - cycle tests according to national and international standards. Even after the purchase you will not come in the fix to have to buy another software module: using the integrated 600 predefined results the formula editor or a calculation relocated to the Excel is pre-configu ...

1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min

- Hobelbreite 50 - 400 mm - Hobelhöhe 10 - 300 mm - stufenloser Vorschub 5-25 m/min. - Spindel FI 50 mm - Drehzahl 6000 U/min - 6 Spindeln - untere Welle min. / max. Werkzeug FI 160 /180 mm - rechte Welle min. / max. Werkzeug FI 160 /230 mm - linke Welle min. / max. Werkzeug FI 160 /230 mm - obere Welle min. / max. Werkzeug FI 160 /230 mm - 2. obere Welle min. / max. Werkzeug FI 160 /230 mm - untere Welle min. / max. Werkzeug FI 160 /230 mm -max. Sägeblattdurchmesser 2. obere Welle 300 mm Motorleistung: 1. unten 15,0 kW 2. rechte 11,0 kW 3. linke 11,0 kW 4. oben 15,0 kW 5. oben 15,0 kW 6. unten 15,0 kW - Motor Vorschub 11,0 kW - Motor Höhenverstellung 1,5 kW - Gesamtanschluss 94,5 kW - Jointer obere Wellen und unter Welle - horizontale Wellen mit Gegenlager / Hydrospannung - obere Welle elektrisch verstellbar mit Vorschubsystem mit Digitaler Anzeige - linke Welle elektrisch verstellb ...

CNC flatbed portal cutting machine with web control CNC 3000. plasma system Fabr. KJELLBERG HiFocus 160i and filter system Fabr. KEMPER. Working range: 2000mm x 4000mm portal bridge with double-sided, synchronised rack/pinion drive in longitudinal axis / play-free timing belt drive in transverse axis / guide track with cover and high-precision linear guide system on torsion stiffener aluminium profile / trolley with precision profile rollers / 3 pieces digital AC drive motors / switch gear control for the switch gear CNC control under Windows with 32bit processor, color screen 12.1 LCD TFT, interfaces V24 + USB, SATRONIK PLUS CAD/CAM programming software with all geometry functions (e.g. point, arc, circle, rectangle, long hole, etc.), functions (e.g. moving adjustment, stretching, chamfering, etc.), manipulations (e.g. turning, mirroring, etc.), SATOMATIC HV 150 PT arc height scan  ...

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 14,200 mm Hook path about 8.000 mm Fabrikat DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

AUTOMATIC CUTTING , BORING and MOULDING machine type PADE 1000 N Machine suitable for assembling part of chairs, tables, frames, small furniture, wheelchair frames, etc. The PADE 1000 N performs the operations of Cutting , milling and drilling at the end of the piece, either singularly or differently combined. All movements of the machine are controlled by pneumatic devices. composed by 3 working units : 1- Cutting unit circular saw diam. mm.350 motor power hp 3 2- Boring unit boring head with 5 / 7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 3- Moulding unit vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage volt. 380/50

1 factory-tested, well-preserved single-girder crane Load approx. 6,300 kg Wingspan approx. 19.134 mm Hook path about 8.000 mm Fabrikat ABUS/DEMAG Year of production/workshop test 1974/2016 Crane equipped with DEMAG monorail trolley, freely movable floor control Working speeds: Hoist 1.0/10.0 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

2 factory-tested, well preserved single girder cranes Payload 7000 kg Wingspan approx. 16.650 mm Hook way approx. 4,000 mm Fabrikat DEMAG/MAN-SWF Workshop tests 1987/1991/2016 Cranes equipped with DEMAG and SWF monorail trolleys with short design, freely movable floor control Working speeds: Hoist CA. 0.3/3,1 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Eurolux Beer Tank/ Storage Tank/ Pressure Tank 1000 Litres with cooling jacket in AISI 304, working pressure: +2,0 bar NEW Pillow Plate Inside Operating pressure:: +3,0 bar +2,0 bar Test pressure: +5,2 bar + 3,4 bar Operation vacuum: -0,15 bar - 0,15 bar Operation temperature: -10/+80°C -10/+130°C Material: V2A - AISI 304, 1.4301 Surface: pickled, passivated and neutralized Upper Bottom: - strong stackable crown - manhole lid round Ø 400 mm with 2 x handle - 1 x thread connection DN 50 with blind cap - 1 x overpressure valve - 1 x CO² venting valve - 6 x cap screws Cylindrical Body: - with cooling jacket 843 mm - connections for cooling jacket on the back inlet 1/2, outlet 1/2  ...

Micro button Manufacturer: Dage Type: Microtronic 22 The universal device for the connection techniques usually used in microelectronics. In many gradations, to changing measuring arms for the pulling test are easily (up to max. 10 kg). Switch can be selected between destructive and non-destructive testing. For the non-destructive test, the maximum assembling force thumb wheel switch can be limiting. The haul-off speed is infinitely adjustable up to 10 mm / s. The readings are analyzed and document formats through the external printer. The measured values are displayed in grams. Technical data Measurement types: Pul-tests/shear test Test modes: destroying / Nichtzerstörend Additional functions: "Overheight-test" (finding great Loophöhen), "keyword test"(Festigkeitprüfung von "Stich-Bonds") Test memory capacity: up to 9999 tests  ...

2 factory-tested, well-preserved single girder suspension cranes Payload 10.000 kg Gauge approximately 17,700 mm Lifting height Max approx. 9,300 mm Make MAN / SWF Year of construction/workshop test 1987 1990/2016 Service life approx. 3 years with SWF monorail trolleys short type, long travel rate programs, freely movable floor control Working speeds: Hoist CA. 0,8/8 m / min Trolley gear approx. 20 m / min Crane chassis approx. 40 m / min

Horizontal cartoner with continuous movements with leaflet folder GUK , bar code reader Leatus and coding unit . Product for which it is equipped: PVC trays with ampoules Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2. Cords and pre-attached cases. Clousere: Tuck Automatic trays feeder . Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power vacuum pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar Mechanical speed : max 260 per minute Format range A 20 - 160 mm B 12 x 70 mm C 70 x 230 mm

1 factory-tested, absolutely like new single angle crane Payload 10.000 kg Wingspan approx. 26.610 mm Hook path about 10,000 mm Make DEMAG Year of production/workshop test 2001/2016 Crane equipped with electric wire rope hoist moving on the side of the vehicle, cross and long travel frequency controlled remote control, Working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear (FU) approx. 0-30,0 m / min Crane chassis (FU) approx. 0-40.0 m / min

Integrated equipment for production of chocolate, chocolate cream and chocolate coating for ice cream. The fat is melted in the heated fat melting tank, then fat is dosed into the temperature controlled chocolate ball mill where is added sugar, cocoa powder and other ingredients, being milled for about 4-6 hours at a controlled temperature. In the first part of the process the tank is heated then cooled by tap water. After milling the chocolate is transferred to the chocolate storage tank. Fat melting tank 540l heating by water jacket and electrical resistor heated grid with 250l beneath the grid volumetric dosing pump controlled from switch board 0.55 kw, app. 200 rpm stirrer 13.1 kW - installed power 2 x 6 kW = 12 kW - heating resistors 0.55 kW water circulation pump stainles steel filter heated fat dosing pump Ball refining tank 500l working ca ...

Bearing number: 3421 CNC LATHE Manufacturer: Haas, Type: TL 25HE Machinen NR.: 70403, built: 2005 Specifications: Max. turn. about 760 mm dia. Max circulation diameter 405 mm dia. Turning length 860 mm Spindle bore 70 mm dia. Main spindle speed range 3400 rpm C Axis - Main spindle movement 0.001 degrees Main motor power 22 kw Tool turret with 12 stations Counter-spindle Counter spindle speeds 4000 Pr/min Operating hours Spindle 9750 hours Accessories: collet device. Materials feed 65 mm Parts Catcher Cooling water system. Chip promotion. Various accessories. Length: 2000mm, Height: , Width: 2100mm, Weight: 8000 Kg

4 factory-tested, very well preserved double girder cranes Load approx. 20.000 kg Wingspan approx. 16.650 mm Hook path about 5.000 mm Fabrikat MAN/SWF Year of production/workshop test 1995/2016 Cranes equipped with SWF double girder trolleys with reduced design to minimize the installation height, freely movable floor control Working speeds: Hoist approximately 0.32/3.2 m / min Katz LG 5.0/20,0 m / min Crane chassis 10.0/40.0 m / min

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Engel injection moulding machine Type: 7050/1500 duo, with Angel ERC 84 2 CL robot control: CC100 year: 2000 Clamping unit Clamping force t: 1500 opening stroke mm: 2350 Holm dimension mm: 1530 x 1275 min/max height mm: 700/1465 Plate size: 2340 x 2040 injection unit Screw diameter mm: Gr 90 injection weight: 2900 Injection volume cm 3: 573 spray pressure bar: 2300 Dimensions and weights Dimensions Lxwxh m: 12 x 3.7 x 2.9 machine weight kg: 63,000/30,000 Miscellaneous 5 core moves 5 specialist cascade tire. Valve gate Angel ERC 84 2 CL robot

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Pneumatic marking press stroke length: 150 mm Maximum pressure capacity: 8 bar Movement stage: 420 x 750 mm Between posts: 650 mm Connection: Pneumatic Dimensions Lxwxh: 85 x 100 x 170 cm Machine weight: 300 kg

Effect: electrohydraulic pressure force: 100.0 t 2 passage: 1100 mm table: 1100 x 425 mm stroke: 380 mm movable cylinder drive: 2.2 kW weight: 970 kg ; new

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

Universal milling machine with automatic movement ram. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. Vertical head. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

01) -conveyor belt 8 m -Conveyor belt 2 m -Roller conveyor with self-centering and bumper -Roller conveyor with self-centering -Inshocker -Roller conveyor with manual self-centering and hidden stop system -Double roller conveyor with bumper -Automatic stacking device -Lifting system -Powered transport rollers All these components are manufactured by "Sitema" - CE 2000 02) Automatic strapping machine "Transpak" - TP 601 D -Width mm: 8-12 -Thickness mm: 0.35 - o, 65 -Inner rolls diameter mm: 200 -Total length mm: 1430 -Total width mm: 620 03) Packaging machine "Sitema" - CE 2004 -Drive: Pneumatic -Pressure bar: 6 04) Temperature Trigger Glue - "Meler" - ML-242-ST - CE 2004 05) Applicator "Robatech" - Concept 8/2B+KP 12C 06) Labeling machine "Topjet eticode 600" 07) No. 2 nozzles  ...

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

We sell a sort block with 17 bins including sorting conveyors, 17 bins with pre - and main sorting conveyors as well as the deloading conveyor. With complete steel substructure with Hall. Timber sorting block type "Schichtetage" with 17 bins with pre-and main sorting conveyor including sorting conveyor, conveyor 17 bins and moveable deloading conveyor. Steel construction included

CAM automatic bundling wrapping machine G60 is a new concept machine, designed to carry out bundling and complete wrapping of parallelepiped shaped products, at very high speed, using heat-sealable plastic film and, upon request, Kraft paper. It maintains ample flexibility of employment, guaranteeing high performance and reliability. The completely automatic working cycle, requires the operator only for wrapping material reel change. This operation is quicker thanks to the rapid film replacement device. The second reel shaft is supplied standard with the machine. Pre-arranged for easy and rapid change-over, this machine is extremely versatile. All adjustment facilities have been arranged on the operator's side, while structural elements, which limit accessibility to the product handling, have been eliminated. The machine basement enables complete separation of product handling area  ...

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

hydraulic internal clearing machine in good operational condition Clearing stroke:1.500mm Tension: 16,000 KG â?¢ the drawing head shot in the drawbridge:85mm Through-hole in the clamping table: 120mm Workpiece diameter: max. 750mm (due to the machine body of the tool feeder) Cutting speed: hydraulically infinitely adjustable from 1 m/min to 6m/min Return speed: hydraulically infinitely adjustable from 5m/min to 30m/min Dimensions of the machine: (bx t x h) approx. 6,600 mm x 800 mm x 1,500mm (without working area) Power supply / connection power: 380Volt 50 HZ /8.0 KW Accessories / Optional equipment: â?¢ the machine has an electrical control for clearing lifting movement â?¢ the machine has an integrated cooling cutting system â?¢ the machine has a flanged machine bed with a manual tool feeder The machine is ideal for the produ ...