126,611 used machines on RESALE, but how to find them? Machine Search
Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg
Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Length approx. 3.2 meters; 13 mm lip
Drive gear for hot forging press K8548 6300T Weight, kg 15 700
Driven gear for hot forging press 6300T Weight, kg 1300
Clutch hub for hot forging press K8548 6300T Weight, kg 7100
SMC Pressure Sensor ISE40A-01-T 0.1-1.0MPa
Machine number: 2-0151 Compressive force: 28 kN Stroke: 12 Table dimensions: 200 x 170 mm with punching tool mounted
Equipped with 1 set of tools, please note the control is defective
Consisting of two punching stations, driven by pneumatic cylinders incl. Installed punching tool on pedestal Dimensions of the pedestal: 560 x 300 x 170 mm
with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
Machine number: 3-0419 Compressive force: 3 kN Stroke: 50 Table dimensions: approx. 150 x 110 mm
Inner diameter: 220 mm Inner belt width: 200 mm Year of construction 02/90 Load capacity per reel is 150 kg, whereby the reel must be screwed to the ground. Weight approx. 450 kg Incl. wiring diagram
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
horizontal pressure tank, steel tank with inner coating Can be used underground with anti-corrosion coating, e.g. for extinguishing water or rainwater or above ground with brackets, e.g. for molasses, AHL, ASL, water, corn mixture Volume: 32,000 L Dimensions: Ø 2.50 × 7.0 m long
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
Machine number: 2-0537 Compressive force: 28 kN Stroke: 60 Table dimensions: 200 x 160 mm Plunger: 60 x 35 mm
"Lower counter bearing: 200mm Upper counter bearing: 600 mm Max. pressure: 35 kn"
Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool
Silo 20 m³ volume with hook holder Payload 28 to, dead weight 2500 kg Diameter 2500 mm, height 6600 mm, outlet height 1100 mm Outlet NW 250 Blow-in line, vent line, inspection cover NW 500 Silo butterfly valve Footprints 2400 x 2500 mm Next Pressure Test 07/28
Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line
Machine number: 2-0586 Compressive force: 28 kN Stroke: 60 Table dimensions: approx. 200 x 150 mm incl. installed punching tool
Pressure silo 34 m³ volume, payload 48 to, dead weight 3000 kg Diameter 2500 mm, height approx. 9000 mm Cone with air loosening Spout with ball valve DN 80 Inspection Cover NW 500 Silo Back Protection Ladder Blow-in line, vent line Pressure test book not available
Equipped with new control and laser protection from PILZ; including 1 set of tools with 2 V die sizes
Pressure silo 3 m³ volume, payload 4800 kg, dead weight approx. 1200 kg Diameter 1750 mm, stand dimensions 1700 x 1720 mm, Spout height 1200 mm / 900 mm Outlet flap NW 250, silo tip with ball valve DN 65 Filling lid NW 450 in the silo roof, Inspection cover NW 450 in silo cylinder Crane eyelets, forklift pick-up shoes Vertical ladder + platform
Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line
If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! 20T PHC Pellet Press Machine Type: Hydraulic Single Column Press Year of construction: 2023 Location: Gelsenkirchen, Germany Specifications: - Press force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Print build-up time: max. 2 seconds (Closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20°C - Deflection:
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Equipped with 4 uprights and 8 beams and intermediate slats to place a wooden plate. Complete with side table with dimensions: 105x60x80cm and 4x zinc plate (antra) each with dimensions: 226x100cm
Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs
# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...
Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!
This WEMHÃNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÃNER Variopress Basic 1000S laminating press. Contact us for more information.
Laminating press manufactured in 2001. This WEMHÃNER KT-F-1E features a pressing area of 5,750 mm x 2,200 mm, with pressing plates measuring 2,600 mm and 2,620 mm in length. The machine accommodates thicknesses from 6 mm to 40 mm and operates at a pressure of approximately 40 kg/cm². If you are looking to get high-quality laminating capabilities, consider the WEMHÃNER KT-F-1E machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
