moulding press used for sale

TSP X1080 Injection Moulding Machine 1080 Ton Machine is in good working condition

TM 1600/1000 Plastic Injection Molding Machine 160 tons Width between columns 53cm, height 50cm Brand: Battenfeld 2000 model

Battenfeld TM 1300/750 injection moulding machine 130 tons Width between columns 47cm, height 46cm Brand: Battenfeld 2000 model

TM 2500/750 Plastic Injection Molding Machine 250 tons Width between columns 57cm, height 55cm Brand: Battenfeld Year : 2000

TM 2700/1330 Plastic Injection Molding Machine 270 tons Width between columns 64cm, height 62cm Brand: Battenfeld Year : 2004

1K 65 Tons Min Mould height - 260 Max Moul Height - 400 distance btw columns - 400 opening stroke 730 valve gates - 1 Max Shot Weight - 142

Engel Injection Moulding Machine With Robot Machine is in good working condition

Sandretto injection press series 7 135 tons sandretto series 7 135 ton Injection molding machine

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic for the production of PET bottles - ZENTRONIK ZR-7 with two forms. The device is used for the production of PET bottles from semi-finished products. 1. Heating furnace for heating PET preforms - 24 kW (dimensions: 1500mmX50mmX1320mm) 2. Semi-automatic PET bottle making machine (dimensions: 1900mmX630mmX1420mm) 3. Bottle mold: single hole mold for 5 liter bottle. ATTENTION! It is possible to convert the machine into a different bottle format for a fee, e.g. a 0.5-liter double-cavity bottle or any other shape and capacity depending on the needs of the buyer. Technical condition: very good as new

Arburg Allrounder 520C 2000-800 Injection Moulding Machine Machine is in good working condition 200 Ton

Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged

Meccanoplastica Jet 55 injection/blow molding machine, 2016, very little used: 1250h of operation.

Automatic PET Bottle Blow Molding Machine Manufacturer: SIDEL Type: SBO 4 Year of prod. 1992 Capacity: 4000 pcs/h Number of moulds in the machine: 4 Preform feeder: yes Two types of molds included: 1.5 L and 2.0 L Chiller: RIEDEL Technical condition: used

Used, well-preserved set of barrel / screw

Hose head with WDS. Nozzle up to 120 mm. Available from stock

various blow molds available from stock. More information on request

Used molds, in good condition. Available ex stock

Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 5-BKZ-40-110 (A 100) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 110 mm Nozzle/ Die: 40 mm Hoses/ Parisons: 5 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: BKZ-40 (A 60) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Head type: 2-BKD-51-125 (A 70) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

INJECTION UNIT Screw diameter: 50 mm Calculated injection volume: 530 cm³ Pressure on the material: 2426 bars LOSING UNIT Closing force: 3300 kN Opening stroke: 675 mm Mold thickness Mini / Max: 330/710 mm Passage between columns: 710 x 630 mm Tray size: 1040 x 950 mm

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bars CLOSING UNIT Mini /Max Mold Thickness: 300-650 mm Passage between columns: 570 x 570 mm

SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table

Used Negri Bossi NB 62 Injection moulding machine Year: 1998

Manufacturer : BATTENFELD Model: 100T TM 1000 / 525 Year of manufacture: 2000 Screw diameter: 40 mm Closing force: 1000 kN

Closing force: 3000 kN Opening stroke: mm Mini /Max Mold Thickness: 230/730 mm Max distance between tray: mm Passage between columns: 665 x 665 mm Dimensions of the trays: 980 x 980 mm

Machine: BILLION 50T H310 YEAR 2000 Year: 2000 Type of control : Number of hours: 30 600 H Closing Closing force: 50T

Injection moulding machine Manufacturer: Engel Model: ES 330 HL Year of manufacture: 2000 Capacity: 90 Tn Working hours: 50290 h

INJECTION UNIT Length / diameter ratio: 20 L / D CLOSING UNIT Closing force: 2000 kN GENERAL Heat output: 37 kW Total installed power: 52 kW Quantity of oil: 650 l. Dimension: (WxHxD) 5.7 x 2.1 x 1.7 m. Weight: 10000 Kg

INJECTION UNIT Screw diameter: 30 mm Calculated injection volume: 98 cm³ Pressure on the material: 1450 bars CLOSING UNIT Mold thickness Mini / Max: 190/330 mm

Manufacturer : Arburg Model: ALLROUNDER 520C 2000/350 Closing force: 200T Bi-material Year of manufacture: 12/2000

Manufacturer: Engel Model: 100T / 310 E MOTION Year of manufacture: 2004 Capacity: 100 Tn

Year of manufacture: 2007 Control Type: CC100 Number of hours: 39600 h Closing force: 50 T Distance between columns: 500 mm x 450 mm Injection volume: 69 cm3 Injection pressure: 2400 bar

Closing force: 200 tons Distance between columns: 560 x 560 mm, Dimension trays: 915 x 915 mm

ENGEL 800 T injection press + ENGEL robot + Magnetic plates REF: 5550/800 Screw diameter: 105 mm L/D ratio: 20 Maximum material pressure: 1600 bars Injectable volume: 3720 cm3 Lamination: 183 g/s Dosing stroke: 430 mm

INJECTION UNIT Screw diameter: 45 mm Calculated injection volume: 258 cm³ Length / diameter ratio: 18 L / D Pressure on the material: 1469 bars CLOSING UNIT Closing force: 1300 kN Passage between columns: 405 x 405 mm Tray size: 610 x 610 mm

Closing force: 100 T Opening stroke: 500 mm Between columns: 420 x 420 mm Tray dimensions: 600 mm X 600 mm Mini/maxi mould: 250 mm Max gap between trays: 750 mm

Screw diameter: 35 mm Screw length: 20D cm3: 168 Bars: 2640 Between columns: 470 x 470 mm Tray dimensions: 670 mm Mini/maxi mould: 250 mm Max gap between trays: 580 mm Motor power: 22 kW Heating power: 11 kw

Closing force: 110 T Opening stroke: 500 mm Between columns: 790 mm x 680 mm Tray dimensions: 790 mm x 680 mm Mini/maxi mould: 300mm Max gap between trays: 800 mm Motor power: 18.5 kW Heating power: 7.4kw

Control Type: CC200 Screw length: 20D Closing force: 40 T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Tray dimensions: 500 mm x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm

Closing force: 250 T Opening stroke: 600 mm Between columns: 630 x 630 mm Tray dimensions: 900 x 900 mm Minimum mould: 300 mm Max gap between trays: 1300 mm Motor power: 45 kW Heating power: 25.9 kw

Type of control: NC 4 Closing force: 250 T Opening stroke: 675 mm Between columns: 630 x 630 mm Tray dimensions: 950 X 950 mm Mini/maxi mould: 330/710mm Max gap between trays: 1385 mm Screw diameter: 60mm Screw length: 20D

Closing force: 280 T Opening stroke: 675 mm Between columns: 630 X 630 mm Tray dimensions: 950 x 950 mm Mini/maxi mould: 330/710 mm Max gap between trays: 1385 mm Motor power: 26 kW Heating power: 23.1 kw Type of control: NC 4

Used Krauss Maffei 150-700 C1 Injection moulding machine From 1998 Without robot Machines is functional and in production, can be seen anytime by appointment. PDF attached.

Used Krauss Maffei 280-1900 C3 Injection moulding machine From 2000 Equipped with Wittmann robot W631-0386/2003 Machines is functional and in production, can be seen anytime by appointment. PDF attached