135,329 used machines on RESALE, but how to find them? Machine Search
Inv. Num. : 6907 Type: B/90 Producer: Curvatubi Generated:- Parameters: Tube diameter: 50-60 mm
cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...
Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues
Bystronik By Speed Laser year - .2004- 4400w Machine equipped with Bytrans loading and unloading connected to a sheet metal magazine with 76 drawers divided into 12 unloading and the remainder of virgin sheet metal.
Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail
Banding film BandAll FTN5048150; Width 48mm; Thickness 50 mic; 150 linear meters/roll; 33 cartons of 6 rolls. Banding foil BandAll FTN5048150; width 48mm; thikness 50 mic.; length 150m/roll; 33 cartons each 6 rolls.
turning diameter: 750 mm turning length: 1520 mm control: Fanuc 18 iT-B total power requirement: 22,0 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5 , 300 mm, 200 mm
Spindle arrangement: scoring saw at the bottom - planing shaft at the bottom - top - right - left Diameter of spindles: 40-X-X-50-50 Spindle Speed: 5400 Counter bearings: 2-3 Jointer: 2-3 Engine powers: 15-45-55-22-18,5 Adjustment of the working width: digital Adjustment of the working height: digital Feed speed : 50 - 200 Feed motor: 45 KW Feed: Cardan Horizontal tool head D205 Vertical tool head D160xH100 Z12 Table height constant approx. 1000mm Diameter of suction nozzles 200-250-160-160-120 Weight 13000 kg
turning diameter: 300 mm turning length: 2000 mm swing diameter over bed slide: 520 mm total power requirement: 7,5 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 4745 mm x 1340 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!
Key data: 1300 mm, 5
Wide belt snding machine Manufacturer: Heesmann Model: LSM 8 Equipment: - Transverse sanding unit - Longitudinal sanding unit - Longitudinal sanding unit - Brush unit - Brush unit
Key data: 60 mm, 2 mm
Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg
Profile grinding machine / strip grinding machine Manufacturer: DIMA Model: LPS /9 Year of construction: 1994 9 grinding units / disc grinding units
Grinder Schaudt BHU 40A Swing diameter: 400mm Center distance: 630mm The technical data can be found in the pictures. approx. transport dimensions and approx. weight: 3.5m x 2m x 2m, 3,500 kg Location of the machine: 76661 Philippsburg The machine can be viewed on site. It is in pristine condition. You can make an appointment for a viewing at any time. We'd love to hear from you.
White brand sawing machine mod. 360 CNC year 2010 revised in 2019
NDT lathe - Böhringer Type VDF 400 Spindle 600-440 mm maximum length 2000mm Tool magazine with 12 tools
Edge banding machine Manafacture: IMA Model: Molding edge banding machine Year of construction: 1997 Hot air unit for pre-glued edge material
NR. 1 SCREW NAIL MACHINE V 17 NR. 2 SCREW NAIL MACHINES V 14 NR. 4 SCREW NAIL MACHINES V 10 NR. 1 NAIL CLEANING MACHINE CAPACITY KG 280/300
sheet width: 0500 mm coil outside dia.: 1400 mm weight max. in kg: 4000 kg plate thickness: 0,80 - 3,60 mm diam. of the rolls ca.: 80 mm feed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/min range of expansion ca.: 445 - 530 mm expansion: manuell total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Control conversion to SIEMENS S7 in 2012 - pneumatic pressure roller on the side - pneumatically ventilated feed roller - Straightening rollers manually adjustable - lateral belt guide at the inlet - Large roller basket at the outlet - Ultrasonic transmitter for loop control - Roller feed type 1125 D - Bandwidth max. 510 mm - Band thickness max. 6 mm with full width 5.50 mm - Roll diameter 125mm - Feed speed: max. 100 m/min. - pneumatically ventilated top roller - Lateral tape guide with digital display - Inlet roller basket ...
used
Offer 20142 Specifications: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed Ab + Auf infinitely variable - Projection 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg
CNC lathe LB 3000 EX II Manafacture: Okuma Corporation Year of manufacture: 2017 Control OKUMA ... OSP-P300LA Turning diameter ... 580mm Turning length ... 950mm inclined bed Axis Y ... 120mm Spindle bore ... 91mm Tool turret ... 12/12 Axis X ... 260mm Axis Z ... 510mm Spindle speed ... 0-5000 rpm. Rapid traverse of the X axis ... 25m/min Rapid traverse of the Z axis ... 30m/min Rapid traverse of the Y axis ... 12.5m/min Axis C ... 360° Main engine power... 22kW L x W x H ... 3420 x 2041x 2444 mm Machine weight ... 6600kg The machine is in good condition, possible to test under power.
SPECIFICATIONS: Machining length: max. 2500 mm Machining width: max. 350-900 mm COMPOSITION: Station I: Milling machine right-left (2 x 11 Kw) Station II: Milling machine right-left (2 x 5.5 kW) Station III: Grinding unit right-left (2 x 3.7 kW) Station IV Grinding unit right-left (2 x 3.7 Kw) EQUIPMENT: 8 pushers for machining 1 hydraulic pump 1 control box 1 control panel 1 protective grille
Servo Driven Labeller Mfc.: Gernep Built: 2017 Overhauled in 2020 2 cold glue stations for back and front + neck label 1 format for Steinie 3 formats long neck and Appo 33 cl back - front - neck (1 format)
Key data: 7000 mm, 1600 mm, 800 mm
Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate
Mashine is in very good condition. Compressor 255-4 and 315-4S with frequency converter. Cooling capacity: 2xHGX34e/255-4 - To-30C/Tc+42C, R404a - 7.6kW 2xHGX34e/315-4S - To-10C/ Tc+42C, R404a - 29kW
x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 215 mm spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 1,8 kW weight of the machine ca.: 860 kg dimensions of machine L x W x H: 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1
SPECIFICATIONS: 2 oscillating grinding units at the top - bottom Inclination 0° - 45° Adjustment option Lateral support for wide workpieces 80 mm guideway Max. working height mm: 100 Upper pushers with adjustable rubberized wheels
Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...
150-180kg/batch general overhauled (exact listing on request) For further photos, information or viewing appointments, please feel free to contact us by phone or in writing. Keywords: roaster, coffee, drum roaster, drum, green coffee, roasted coffee, roasting machine, coffee roasting machine, probat
ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...
turning diameter: 200 mm turning length: 508 mm x-axis: 176 mm z-axis: 520 mm control: Fanuc-Series O-TD total power requirement: kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,73x1,98x1,64 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stitching machine Hohner EXACT 2 heads Hohner Universal 52/8 adjustable distance Art.: PS5830
ETT TFS40C tray former with Nordson ProBlue 4 hot melt unit, electrics 3x400V/50Hz, power 15 kVA, compressed air 6 bar, Siemens SIMATIC S7-300, machine net weight approx. 1570 kg, includes format parts for tray sizes of 135x90x35 mm, 147x108x35 mm, 150x100x35 mm & 159x106x35 mm (LxWxH), capacity up to 40 trays per minute
turning diameter: 330 mm turning length: 140x130 mm control: turning diameter over slide: 140 mm travel -x axis: 107 mm travel -z axis: 230 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1020 mm, 3 mm
Specifications • Sheet thickness max. 3.0mm • Working width max. 1020mm • Bending angle max. 120° • Opening width of the upper beam max. 160mm • Description: suitable for prototypes • Power: Manual operation • Dimensions: 2300 x 1600 x 1500 mm • Weight: 760 kg
Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a choiceor mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire choiceor mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance ...
CNC Vertical Lathe PIETRO CARNAGHI Model AP 140 TMY Year: 2013 Never used Table Diameter: 10000mm Max. swing: 14000mm Max. loading on table: 500t Max RPM: 0.2-35 Turning height: up to 8900mm CNC Siemens 840D Ram size: 600x600mm Ram stroke: 4000mm Milling head power: 100kW Machine is packed in containers and ready for shipment. The machine was assembled by manufacturer, tested, disassembled and shipped to the buyer. And was never installed after that.
Wittman-Battenfeld injection machines 2 units 110tons and one 180t -BTT110 - BT110 - BT180
WEIBERT WJ-D53 Thickness planer Planing width of 530mm n=5000min 4 knife shaft Tersa n=5000min Planer shaft D=125mm Max. chip removal of 8mm Passage height from 3-300mm Feed speed of 8 and 16 m/min. Motor for feed 1.5 KW (2 HP) Suction nozzle of 160mm Electronic height adjustment of the thickness table with display Machine table, planing shaft bearing block and table guide made of Cast iron! Numerical display of the planing height Long thickness table Motor 5.5KW 400V 50HZ G&WJ-D53
MBO K 800/6 S-KTLT with 2nd unit Age: 2006 Format: 780x1200 mm Equipment: Pallet Feeder K 800 - FP120 MBO Navigator Touchscreen Control Panel 6 buckles 1x Side buckle 2x knives 1x Side Buckle Electr. Double sheet control Anti Noise hood Slitter Shaft Cassette MWK Scoring, Perforating and Cutting devices for standard operations 2nd Folding Unit K 800.2-2-78/4 with double benefit device
Three-roller calender brand MG 3000 x 200 mm. Year 2006
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm Dynamic Edition
1 JUSA HT high temperature sample cone / bobbin dyeing machine type Jusapack Junior 6, year 1997, 6 vessels, machine can work with only 1 vessel or with maximum 6 vessels simultaneously, vessel diameter 230 mm, each vessel capacity for 5 x 6" bobbins (possible to load 6 x 6" bicopress bobbins on each vessel), sword useful height is 750 mm, maximal capacity 6 x 6 Kg = 36 Kg, possible to dye 1 or 2 bobbins only working with 1 vessel only, AREL controller type ATC304, circulation pump is inverter controlled, supplied with 6 material carriers. On this machine you can dye, always the same shade, the following capacities: 1 to 6 KG (1 tube only), 7 to 12 Kg (2 tubes), 13 to 18 Kg (3 tubes), 19 to 24 Kg (4 tubes), 25 to 30 Kg (5 tubes), 31 to 36 Kg (all 6 tubes)
1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER type BOWA with weigth pan, 2 TRÜTZSCHLER weighing feeder type PWSE 1200, 1 TRÜTZSCHLER Tuftmixer type FMN, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1 1 TRÜTZSCHLER opening line year 1999 composed of: conveyor feed with 500 cm length and 120 cm width, 1 TRÜTZSCHLER bale opener type BO 1200, year 1999, 1 TRÜTZSCHLER fine opener Tuftomat type TFV1, year 1999 3 TRÜTZSCHLER material reserve with trunk and condensor type MS, year 1999 1 TRÜTZSCHLER fine opener with feed trunk and condensor type FD-S, year 2004
Key data: 510 mm, 2250 mm, 4 St.
Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg
maximum number of results exceeded
please refine your search
