moulding machines used for sale

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Peske, milling motor type VS 31.09-4 -Power: 0.37 kW 8540 rpm at 300 Hz -Voltage: 165 volts -Take-up: collet -Tool: Ø 8 mm -Number: 2x motor available -Price per piece -Dimensions: 260/60/H140 mm / 255/60/H155 -Weight: 3.5 kg/pc.

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.55 kW 2700 rpm at 50 Hz -Power: 0.95 kW 5360 rpm at 100 Hz -Voltage: 220/380 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 175 mm -Number: 4x engines available -Price: per piece -Dimensions: 430/170/H185 mm -Weight: 15 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Power: 0.22 kW 17250 rpm at 300 Hz -Voltage: 133/200 volts -Admission: -Tool: Ø 150 mm -Dimensions: 560/220/H240 mm -Weight: 16 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -on dovetail guide, cross table -With guide for cutting veneer edges -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Admission: -Tool: Ø 150 mm -Dimensions: 880/260/H300 mm -Weight: 18.5 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW at 11160 rpm at 200 Hz -Power: 0.22 kW at 17250 rpm at 300 Hz -Voltage: 133/200 volts -Receiving shaft: Ø 15 mm -Tool: Ø 150 x 3.0 mm -Dimensions: 200/85/H70 mm -Weight: 3 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.4 kW 2890 rpm at 50 Hz -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 165 x 10 mm -Dimensions: 500/250/H160 mm -Weight: 42 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 volts -Receiving shaft: Ø 35 mm -Tool: Ø 180 x 40-55 mm -Dimensions: 540/250/H160 mm -Weight: 46 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW at 2880 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 220/380 volts -Receiving shaft: Ø 40 mm -Tool: electrically movable -Tool: Ø 180 x 28-48 mm -Dimensions: 830/400/H200 mm -Weight: 70 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 20 mm -Tool: mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H155 mm -Weight: 4.2 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -Number: 3x motors available -Price: per piece -Dimensions: 250/60/H140 mm -Weight: 3.8 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, spindle motor, milling motor -Manufacturer: Perske, milling motor for edge processing machines -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 15 x 17 mm / M12 -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DVMS 903/2 -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Recording shaft: Ø 30 x 32 mm -Tool: Ø 70 x 20 mm / insert milling cutter -Number: 1 piece available -Dimensions: 250/59/H140 mm -Weight: 3.8 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm -Weight: 100 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21.05-2 with bracket -Power: 0,15 kW 11160 U/min -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Number: 2x milling motor available -Price: per piece -Dimensions: 260/200/H200 mm -Weight: 4.8 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type DKNS 502/2 with bracket -Power: 0.15 kW 11160 rpm -Voltage: 133 V / 200 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KNS 21 05/2 with bracket -Power: 0.15/0.22 kW 11160/17250 rpm -Voltage: 133/200V / 200/300 Hz -Mounting shaft: Ø 15 x 15 mm -Saw blade. Ø 140 mm -Dimensions: 260/200/H200 mm -Weight: 4.5 kg.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 71.14-2 D -Power: 4.4 kW 2820 rpm -Voltage: 400 V / 50 Hz -Mounting shaft: Ø 30 x 40 mm / M30 x 3,5 -Number: 2x motor available -Price: per piece -Dimensions: 515/230/H150 mm -Weight: 37 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KCS 70.12-2 D -Power: 5.0 kW 5860 rpm -Voltage: 400 V / 100 Hz -Mounting shaft: Ø 40 x 80 mm -Number: 4x motor available -Price: per piece -Dimensions: 480/232/H150 mm -Weight: 34 kg/piece

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed -Manufacturer: Nucleus, lowering unit - flatbed for ultrasonic welding machines -Eco FR360102 -Servomotor: NuDC42I25R-1000 Voltage 24 V -Number: 5x lowering unit available -Price: per piece -Dimensions: 340/240/H130 mm -Weight: 4.5 kg/pc.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Number: 4x lowering unit available -Price: per piece -Dimensions: 250/220/H85 mm -Weight: 2.3 kg/pc.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power output at 50 Hz: 4.4 kW, 2890 rpm -Power output at 100 Hz: 6.6 kW, 5860 rpm -Hole: Ø 35 mm -Tool: Ø 250 mm -Number: 3x motors available Price: per piece (other types of engines also available) -Dimensions: 560/240/H160 mm -Weight: 50 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 17300 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Motors: some with right-hand or left-hand threads -Number: 9 motors available Price: per piece -Weight: 3 kg/piece

Three-phase motor, electric motor, double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 1.49 kW -Speed: 2800 rpm -Shaft: Ø 15 x 25 mm -Design: B5 -Protection class: IP 54 Price: per piece Quantity: 3 pieces -Dimensions: 320/130/H155 mm -Weight: 13.7 kg/piece

General SKU426X1426 LocationBarneveld CEcheck MakeAllgaier Main Features MaterialStainless steel Surface2.3 m2 Sizes diameter1720 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,3 m² Number of sieve decks:3 Sieve sizesø 1720 mm With covercheck Inletø 300 mm Outletø 200 mm Drive vibro motorcheck Motor3,0 kW, 400/690 V, 1415 rpm, (Ex) Sieve perforation10 mm, 5 mm, 3 mm With ball cleaningcheck With extra sieve decks8 mm, 3 mm, 1 mm With jacketcheck Tumbler screening machines MaterialStainless steel 1.4305 (303), Stainless steel 1.4571 (316Ti) General Serial5795 TypeTSI 172 Year of construction2004 Year of construction2004 Mounted on mild steel framecheck With switchcheck Floor space2,10 x 2,00 m Total height1,80 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: ...

x-travel: 1600 mm y-travel: 710 mm z-travel: 700 mm Control: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mm spindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/min spindle drive: 11 kW feed X/Y/Z-axis: 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis: 5000/5000/2500 mm/min feed motor: 3 kW distance table / vertical spindle: 50 - 750 mm distance table/horizontal spindle: 60 - 760 mm table load: max. 3000 kg total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,50 x 2,82 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 6 St. Working width: 230 mm Working height: 150 mm Length of the planing table: 2000 mm Feed motor: 5,5 kW Feed speed: 7-36 m/min. uper SWT 23 XL-6 Four-Sided Planer ----------------------------------------------- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----------------------------------------------- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ------------------ Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left --------------- ...

drill diameter: 2.0 - 20.0 mm lip angle: 90 - 135 ° turning speeds: 4800 U/min voltage: 230 Volt engine output: 0.12 kW weight: 8.6 kg range L-W-H: 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm 7 pieces  ...

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V Control: total power requirement: kW weight of the machine ca.: t Table Swivel 5° - 0° - 5° Internal Grinding Attachment Marposs Steadies Dresser Coolant The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS  ...

Polar 92 ED, Year 2001 Display Program Airtable Table left Table right Etc. Available: at short term

length: ca. 3.200 mm width: ca. 1.400 mm height: ca, 1.600 mm Motors: 2 table - swivable: Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Key data: 600 mm, 20

The Mahr Primar GMX 600 gear measuring machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of measuring gears, camshafts, rotationally symmetrical components, tools. . Technical data Diameter: 600 mm Module: 20 mm Axial travel: 700 mm Dimensions: 2,300 x 2,400 x 1,800 m Machine weight: approx. 5,000 kg Information and data are non-binding, subject to prior sale Special features: Can be delivered as a used machine or as a retrofit with a new control system based on Siemens and measurement software.

Key data: 2500 mm, 1000 mm, 1100 mm

CNC Bed Milling Machine Manufacturer: Anayak Type Performer 2500 Year of manufacture 2007 Control Heidenhain iTNC530 ( with new monitor ) Table size 2700 x 850mm Load 6,000kg Travel X/Y/Z 2500/1000/1100mm Tool holder SK50 IKZ Internal Coolant Supply Chip conveyor Electronic Handwheel Heidenhain HR410 Head cannot be swivelled over program Engine on: 54.205h Spindle on : 14.850h Without the accessories that can be seen.

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

Used line for weighing, portioning, and packaging apples into polyethylene bags made by MAF-RODA and GIRO. The apple weighing, portioning, and packaging line consists of several components that, when assembled, form a single unit. Line components: 1. Water unloading tank. 2. Water unloading chute. 3. Fruit elevator from the water. 4. Inspection table. 5. Brush dryer. 6. Apple feed conveyor. 7. PDG series fruit weighing machine. 8. Plastic bag packaging head with label printer. 9. Rotary table. 10. Water circulation pump.

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: MAW IMA, Type: Frontenbohranlage, Year: 2000, Control: Ferrocontrol, Program: yes, Function: Bohren und Beschläge setzen, Work piece width min-max mm: 300-600, Min.-max. workpiece length in mm: 400-1500, Min.-max. workpiece height in mm: 16-22, Destacking unit: yes, Inlet roller conveyor: Hordenwagen, One or two Spot machine: Stern 4 Platz, Working stations: 4, Dowel driving station: no, Milling spindles horizontal: no, Milling spindles vertical: no, Fitting type: Topfband, Belt drilling stations: yes, Bänder Eindrehstation: yes, Hinges inserting unit: yes, Magazin for hinges!: yes, Set buffer: yes, Dowel driving station: no, Working range X: 1500, Working range Y-axis: 600, Drill gearings: 2, Drilling supprt from bottom: 1 Verstärktes Bohrgetrieb Beschlag/ L Bohrkopf ca.12 spindeln, Drill gearings: 2, Drill support from top: 1 Stück 3 Spindeln, Drill gearings: 2, Charg ...

Manufacturer: Priess und Horstmann, Type: BAT III, Year: 1995, Control: Priess und Horstmann, Program: yes, Funktion: Frontenbohrmaschine, Work piece width min-max mm: 150-600, Min.-max. workpiece length in mm: 150-1300, Min.-max. workpiece height in mm: 10-45, One or two Spot machine: 2, Working stations: 2, Feeding speed max m/min: 80, Fitting type: Blum, Set buffer: yes, Working range X: 21300, Working range Y-axis: 2600, Working range Z: 60, Vertical drills-X: 2, Drill vertical Y: 15, Horizontal drills-X: no, Drill gearings: 3, Drilling supprt from bottom: 2, Drill gearings: 3, Drill support from top: 1, Drill gearings: 3, Hinges inserting unit: yes, Magazin for hinges!: yes, Radial arm machine: yes, Year :1995

Manufacturer: 5 Achs Leimspritzanlage, Type: Superfici, Year: 2000, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 10-100, Working widht max mm: 1300, Einlauband: 3500, Enststaubung: 2 Bürsten mit Ioniesierung, Spraying heads - total: 1, Zuluftfilterdecke: yes, Abdunstrockner mm : 7500, Düesentrockner 1 mm Temperatur: ca. 45, 5 axis machine: yes, Stainless steel design: yes, Spraying stations: 1, Working widht mm: 1500, Feeding speed m/min: 3-5, lichte Durchlaufhöhe mm: 100, Dry exhauster: yes, Transport system paper: yes, Lackierpistolen: 2, Materialförderpumpen: Krautzberger, Spraying heads - total: 1, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Year :2000