moulding machines used for sale

Milling machine Röders RXP 800 DS BJ "007

2 x injection moulding machines EL - EXIS 200 S incl. Wittmann robot cell for removal and feeding ( No IML ) EL - EXIS 300 S incl. Wittmann robot cell for removal and stacking ( no IML )

Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...

Max. sheet size: 740 x 1040 mm Min. sheet size: 350 x 400 mm Max. production speed: up to approx. 8,000 sheets/hour Max. die-cutting force: approx. 250 tons Paper / cardboard thickness: 90 g/m² – 2,000 g/m² Max. corrugated board thickness: approx. 4 mm 68,372 operating hours Standard machine with existing accessories Pallet feeder (NonStop) Pull lay on the left side Stripping station Blanking station Non-stop delivery min. 4 × upper frames min. 4 × lower frames 2 × quick-lock frames

bore capacity in steel (diameter): - mm arm length: 1600 mm workpiece height max.: - mm taper MK: 5 total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine TOS KURIM FRO 6, FRO8

Wood Her STREAMER 1057 FU + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for setting the units Pre-milling unit for attaching in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station GLU-JET cartridges + PU gluing Adhesive application using nozzle technology Workpiece height 6-60 mm Car. Glue height adjustment High-quality 3-roll printing unit, 1st roll motorized Cross-cut unit pneum. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° slant of the cross-cut saws Milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° Corner copy unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper carriers Surface Scraper Unit - Finish Spraying Device - PU Machine with all machining tools Machine is WORKSHOP TESTED in TOP CONDITION

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.

Spiral mixer Kemper ST 125 A + 2 boilers Type: SP 125 A with 2 boilers, optional extra boiler to purchase for max. 125 kg flour or for max. 200 kg dough with 2 automatic timers Bowl diameter 90cm Tub capacity: 300 liters Boiler drive by friction wheel Boilers are manually locked extendable with 2 timer relays automatic 2 speeds fast and slow Flour dust cover Spiral and tools made of stainless steel Boilers are also made of stainless steel Machine is anchored to the ground with 2 screws Machine head moves up or down when the boiler is retracted and extended. 400 volt power connection Robust and stable machine Tested for function

- technically efficient, ready to work – after full service - drilling for the bottom hinge - automatic screwdriver + ASS 60 screw feeder - punch holder - centring system - steering stop for trimming the stay - tilting table - shelf

Baguette Long Roller Major Manu FFBT M750 - Current type: 50Hz -Nominal voltage: 400 V -Electrical power: 0.55Kw

Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.

Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

faceplate diameter: 1.600 mm swing diameter: 2.000 mm turning height: 1.400 mm Control: Fanuc max. Torque: 23.863 Nm cutting capacity: max. 3.000 kgf max. workpiece weight: 10.000 kg table:: table diameter: 1.600 mm table speeds: 0,7 - 280 1/min power capacity - table: 37/45 kW C - Axis:: resolution: 0,001 ° Working speed: 0 - 1.200 °/min max. table speed: 3,333 1/min turret slide:: Shank diameter: 32 mm spindle cone: ISO 7/24 / No.50 Spindlespeed: 30 - 3.000 min/-1 power capacity - Tool Spindle: 15 / 18,5 kW max. Torque: 235 Nm ram cross section: 220 mm axis stroke:: x-axis: 1.900 mm z-axis: 900 mm cross rail adjustment: 700 mm Tool-Presetter:: tool taper: MAS-BT 50 number of toolpositions: 24 (12 + 12) pos. max. tool weight: 50,0 kg draw bolt: DIN 69872.50 feeds:: rapid feed (X / Z): 7,5 m/min feed speeds: max. 7.500 mm/min rapid traverse of the crossrail: 300 mm/min total powe ...

Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...

grinding wheel diameter: mm table length: - mm table width: - mm total power requirement: 5,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 600 mm : 500 mm : 400 mm : 1000x500 mm : 1200x250 mm : 40-3200 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabricante DAEWOO Modelo PUMA 2000 SY Año 2003 CNC FANUC 18i – T Capacidades Diámetro máx. sobre bancada 600 mm. Diámetro máx. sobre carro 550 mm. Diámetro máx. torneable 330 mm. Longitud máx. torneable 510 mm. Recorridos y avances Recorrido Eje X 250 mm. Recorrido Eje Z 580 mm. Recorrido Eje Y 100 (±50) mm. Recorrido Eje B 580 mm. Avance Rápido eje X 20 m/min. Avance Rápido eje Z 24 m/min. Avance Rápido Y 7,5 m/min Avance Rápido B 20 m/min. Cabezal Eje C INCLUIDO Indexación eje C 0.001 º Paso de barra 76 mm Nariz A2#6 Velocidad 4.500 rpm. Potencia 15 kW Sub-cabezal Eje C INCLUIDO Indexación eje C 0.001º Paso de barra 45 mm Velocidad 6.000 rpm Potencia 7.5 kW Torreta y Herramientas motorizadas Numero de Posiciones Torreta 12 Dimensiones de la Herramienta 25 mm Tiempo de Indexación Torreta 0.1 s Velocidad Herramienta Motorizada 5 ...

Working width: 630 mm Working height: 240 mm Motor output: 5,5 kW Number of knives: 4 St. Feed speed: 6 - 18 m/min. Dimensions (L/W/H): 1.250 x 1.050 x 805 mm weight of the machine ca.: 825 kg : Tersa turning speeds: 4.500 U/min table-size: 630 x 1.000 mm : elektrisch - manuell The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used, technically overhauled reinforcing steel shears. Footswitch with emergency stop function. Hydraulic counter holder Cutting capacity max.1 rod 45mm D. Power 11 KW.

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

Description The Krones Checkmat 731 (built in 2016) is a high-performance inspection system for quality control in beverage filling lines. The machine reliably checks the fill level, closure, label presence and other quality-relevant parameters. Thanks to its seamless integration into Krones' high-speed lines, it ensures consistent product quality and efficient rejection of defective containers. Specifications Manufacturer: Krones Model No.: Checkmat 731 Year 2016 Condition Used Stock number 103822 Current type and system AC 1/N/PE Voltage 230 V Frequency 50

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending power 2 rods 28mm D. Bending speed 6/13 revolution.min. Control Siemens Touch Display CC Power 4 KW.

Code: 0299 Brand: SCM Model: S 630/E - CE Standard Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Used, technically overhauled reinforcing steel bending machine. 4 pieces of counter retaining strips. 2 footswitches with emergency stop function. Max. bending capacity 1 rods 28mm D. Bending speed 6/16 revolution.min. Control with bending pins for three angles adjustable by hand. Power 3.5 KW.

General SKU379X951 LocationBarneveld CEcheck MakeMonTech TypeD-RPA 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Electric capacity230 V MaterialStainless steel With jacketcheck General No.090 KA 666 Year of construction2019 With switchcheck Floorspace0,70 x 0,55 m Total height1,52 m Extra SpecificationsMachine type: MonTech D-RPA 3000 Dynamic Rubber Process Analyzer (RPA) / advanced rheometer for rubber &:amp: polymers (QC and R&:amp:D).Use: measures viscoelastic and curing behavior (e.g., G’, G’’, tan δ, viscosity, cure kinetics) under controlled temperature, strain and frequency.Temperature range: ambient to 232 °C.Frequency range: 0.001–100 Hz.Strain range: up to 360° (very wide dynamic range).Torque range: up to 250 dNm.Sample volume: approx. 4.5 cm³ (sealed biconical die system).Utilities (typical): compressed a ...

Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

General SKU379X1441 LocationBarneveld CEcheck MakeInstron TypeC-6898-000 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Viscosity test machine Viscosity meter(Notching press) Electric capacity230 volt Motor0,03 kW, 230 volt MaterialStainless steel With jacketcheck General No.50009 Year of construction2019 With switchcheck Floorspace0,52x0,44 m Total height0,44 m Weight43 kgViscosity test machinesÌnstronPlastic machinery > Viscosity test machinesBrand > Ìnstron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU379X1446 LocationBarneveld CEcheck MakeMonTech TypeABR 3000 Main Features MaterialStainless steel Specified Features - Viscosity test machine Viscosity meter(Abrasion Tester) Motor230 V Speed40 rpm MaterialStainless steel With jacketcheck General No.400 KA 666 Year of construction2019 With switchcheck Floorspace0,74 x 0,30 m Total height0,32 m Weight60 kg Extra SpecificationsRotary drum diameter: 150 mm Roll length: 460 mmEquipped with a quick clamp for test specimens. Peripheral speed of the drum with abrasion sheet: 0.32 m/s.Viscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us  ...

General SKU379X1445 MakeMonTech LocationBarneveld CEcheck TypeMV3000 Basic Main Features MaterialStainless steel Specified Features - Viscosity test machine Viscosity meterMooney Viscometer Electric capacity230 volt Speed2 rpm With computer(as is) MaterialStainless steel With jacketcheck General No.076 KA 667 Year of construction2019 With switchcheck Floorspace0,56 x 0,55 m Total height0,90 m Weight100 kg Extra SpecificationsMeasurement type: Mooney viscosity, scorch, stress relaxation Temperature range: up to approx. 232 °C (precise chamber control) Rotor type: large or small Mooney rotor (depending on setup) Closing force: 11.5 kN Rotor speed: 2 rpm (Mooney test speed) Pneumatic supply: 4.5 bar (clean, dry air) Test chamber: rigid frame, automatic clampingViscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech What you can expect ...

General SKU379X1442 LocationBarneveld CEcheck MakeMonTech TypeDisperTester 3000+ Main Features MaterialMild steel Specified Features - Viscosity test machine Viscosity meter(dispertester) Electric capacity230 V MaterialMild steel With jacketcheck General No.318 KA 666 Year of construction2019 With switchcheck Floorspace0,22x0,40 m Total height0,18 m Weight25 kg Extra SpecificationsStandards Compliant with ISO 11345:2006 and ASTM D 7723 (dispersion analysis) Optics Magnification: 100× Field of view: 12 mm × 3.5 mm Agglomerate measurement range: 1 µm – 250 µm Image resolution: 10 MP with telecentric optics Focus: automatic or manual Illumination: controllable multi-directional LED Mechanical Precision scanning with linear two-stage system enabling multiple readings per sampleViscosity test machinesMonTechPlastic machinery > Viscosity test machinesBrand > MonTech  ...

General SKU413X1257 MakeGKM Siebtechnik TypeKTS-1600/4 No.2877 Year of construction2017 LocationBarneveld Main Features MaterialStainless steel Surface1.83 m2 Sizes diameter1580 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.83 m² Number of sieve decks:4 Sieve sizesø 1580 mm With covercheck Inletø 200/400 mm Outletø 200 mm Drive vibro motorcheck Motor4 kW, 400 V 1455 rpm Sieve perforation4,0/ 4,0/ 3,0/1,6 With ball cleaningcheck With jacketcheck Tumbler screening machines MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floor space1,95x1,95 m Total height1,70 m Weight1400 kg CEcheckTumbler screening machinesGkm SiebtechnikSieves > Tumbler screening machinesBrand > Gkm Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

centre distance: 2000 mm : 600 weight of the machine ca.: 3,2 t Passage 49 mm Digital Lynette The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding line H+H KL 112-45-T10; YOC 2002; good condition; cleaned and tested; Inlet width 350mm; 10 fold pockets; Investor Gremser FN-K-TH year 2007; Preset counter HHC-100. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 350mm; Ten Pockets; feeder Gremser FN-K-TH year 2007; count unit HHC-100

Polar 92 N+, Year 2025 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: at short term

Key data: 1020 mm, 1 mm

3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685

Key data: 1020 mm, 2 mm

with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9

Monoblock KRONES VKS- 054-PET Year of construction -1991 Number of fillers - 54 pcs., Number of screw heads - 8 pcs. The machine is in a state of technical novelty after a major overhaul in 2026, It has one set of format parts per 1.5 liter PET bottle

Deep Drilling Machine brand Buck Year of construction 2000

Inv. Num. : 8956 Type: Easy Cut 6001.20PG Producer: MicroStep Created: 2006 Parameters: Control system: MSNC 500 Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 38 mm Plasma source: Formica 163 W Machine weight: 2700 kg

CHEVALIER FSG-1640ADIV surface grinding machine was built in 2022 in Taiwan by Falcon Group Co., Ltd. The machine is used for precision grinding of workpieces with a maximum weight of 440 kg. A number of state-of-the-art technical solutions, combined with extensive equipment, make it the best choice for professional production applications. Grinding is performed fully automatically on a large electromagnetic plate or directly on the work table. The work table is hydraulically driven and moves on ground and induction hardened guideways. To achieve the highest machining accuracy and precision, the CHEVALIER FSG 1640 ADIV magnetic surface grinding machine is equipped with dynamic balancing and automatic dressing of the grinding wheel. During grinding wheel dressing, the work table automatically positions itself where the diamond tools are and compensates according to the operator’s  ...

1993 Airtable Side tables (air) Light barrier Programmable Jogger–RAB2 Lift – L600-3 Three extra spare knifes In production Located: Germany Available: 05/2026

Key data: 410 mm, 200 mm, 3 kW

Thickness planer Bäuerle Type DM 41 Planing width 410 mm Planing height 200 mm 4 Knife Shaft Strip planer knife Motor power 3 kW 2 sliding rollers in the table Feed speed 6.5 – 10 m/min. Speed of the knife shaft 5000 rpm. Engine speed 2800 rpm. Weight approx. 600 kg

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Spindle bore: 42 mm Circumferential diameter over bed: 330 mm Multifix holder Tailstock with an MK3 lining Speed: 1-4500 1/min

Fully functional Vertical internal broaching machine with electromechanical drive Manufacturer: Arthur Klink Pforzheim Type: RISH-M 10 x 1,250 x 500 with 4 broaching points Year of Make: 2014 Machine number: 03.2734 Control: Siemens Sinumerik 840 D Total weight of the machine: 24,000 kg Operating hours: 56,674 h Accessories: Slide conveyor type 2.126-3 (magnetic belt) Item number: 12513433-00-0 Year of construction 2014 FLT Portal Machine number: 03.2734 Year of construction 2014 Location of the machine: 73430 Aalen We are happy to send you videos in advance. The machine can be viewed on site. It is still energized and works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you  ...

Envelope inserting machine Pitney Bowes Di 830, envelop format: min: 88 x 220 mm, max: 164 x 242 mm, max 3000 cycles per hour, very good condition, well maintained and in production ready condition.

year 2009. injection volume 9 cm3. Immediate ex stock available

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg