moulding machines used for sale

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Double edger Woodmizer EG250, as good as new, max. 80 operating hours, 15 KW, saw blades, infinitely variable feedPrice subject to change, errors, printing and typesetting errors excepted

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.

Demonstration machineThe professional log band saw for a log diameter of up to 100 cm from Forestor Pilous is the further development of decades of sawmill tradition, specially designed for the sawing professional. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. 5 hydraulic angle stops.2 pieces of stem clamping tool. The saw is standard for blocks up to 7.6 m and can be extended as desired. Automatic feed with infinitely variable speed. Electrical

Log band saw Pilous CTR750E, built in 2024, very good condition, electric feed infinitely variable, 5.5 kWPrice subject to change, errors, printing and typesetting errors excepted

Double edger EG100, built in 2022, very good condition, max. board thickness 50 mm, max. trimming width 300 mm, 7.5 kW, 2 knivesPrices subject to change, errors, printing and typesetting errors excepted

Double edging Pilous DB700M, built in 2023, like new, incl. saw blades, 11 kW, approx. 700 kgPrices subject to change, errors, printing and typesetting errors excepted

Pilous CTR520 log band saw, good condition, cutting length 5.8 m, max. 550 mm trunk diameter, 4 kW S1, 3110 mm cutting length, 310 kgPrices subject to change, errors, printing and typesetting errors excepted

Solid band mill for materials up to the diameter of 130 cm. Soft starter is included, with extending sections expandable. Automtic feeder with variable speed. Electrically height adjustment adjustable from control panel. With hydraulic log taber, log turner and clamping tool. CE Technical details: main engine power 22 kW S1 cutting length 6,7 m max. trunk diameter 130 cm weight 2800 kg

Mobile sawmill Logosol B1001, year 2020, very good condition, 23 hp engine, hydr. Trunk compensation, XL trunk mount, trailer kitPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine STÖ310V, very good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, year 2001, less good condition, incl. driving device, impeller is worn, 4 kW S6, 1700 mm table length, 410 mm table width, 3 knives, 360 kgPrices subject to change, errors, printing and typesetting errors excepted

The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

Demonstration machine Standard equipment: Solid machine frame Long feed table Optimal price/performance ratio Noise protection hood Digital display of width and height adjustmentTechnical data: Planing width (finished size) min./max. 18 - 180 mm planing height (finished size) min./max. 7 -120 mm Min. workpiece length (single workpiece) 430 mm With group feed 250 mm Number of work spindles 4 Tool diameter of the 1st spindle 120 mm Tool diameter

AD planing machine Hammer A3-41, year 2005, 1800 mm table length, 3 knives, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planer Minimax 310, good condition, 2.2 kW, 200 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Scheppach HMC3200, built in 1993, good condition, 2.9 kW, 320 mn table width, 1380 mm table length, 150 kgPrices subject to change, errors, printing and typesetting errors excepted

With strip blade, slightly usedSurface planer:Table dimensions 1800 x 410 mm, Max. chip removal 5 mm, Planer shaft diameter 100 mm, Number of planer blades 4 pieces,Thickness planer:Table dimensions 700 x 406 mm, Max. chip removal 4 mm, Feed speed 8m/min, Motor output power 5 kW S6 400V (4kW S1), Weight, 450 kg

Rojek 410 AD planer, good condition, built in 1997, standard equipment, 3.4 kW S1, 400 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machineThe thickness planer Holzprofi DMS53 is characterized by its sturdy construction, the strong machine casting table with sanded surface and modern handling. Electric thickness table adjustment with displayIncl. 2 adjustable under-table rollersCE compliant, made in EU! Technical data:Table dimensions 530 x 950 mmMax. Chip removal 8 mmPlaning thickness 3 - 300 mmFeed speed 8 / 16 m/minPlaning shaft diameter 125 mmPlaning shaft speed 5000 rpmNumber

Demonstration machineYear of construction 2022The new FSN dressing thickness planer is characterized by its stable design, the strong machine casting tables with a ground surface and modern handling. The machine is space-saving and extremely convenient when changing from dressing to thickness. The solid guide of the thickness table ensures the best planing quality.A mechanical digital display ensures perfect reading of the thickness height.CE compliant, 100% Made in EU (developed, built, quality tested)

Exhibition machineThe DMA41L surface planer is characterized by its sturdy construction, strong machine casting tables with ground surface and modern handling. The dressing fence is 45 swivel. CE compliant, made in EU! Technical data:Table dimensions 2600 x 410 mmMax. Chip removal 8 mmPlaning shaft diameter 125 mmPlaning shaft speed 4700 rpmNumber of planing blades 4 piecesPlaner knife dimensions 410 x 35 x 3 mmMotor output power 5.5 kW -S6 (4kW S1)

Exhibition MachineProfessional Wood Professional Commercial and Industrial Surface Planing Machine for Professional Use. The machine is characterized by its stable construction and good operability. CE-compliantTechnical data:Dressing table length 2750 mmDressing table width 550 mmPlaning width 530 mmPlaner blade 4 pcs 550 x 35 x 3 mmKnife shaft 120 mmChip removal max. 7 mmLength stop ruler 1300 mmMotor output power S1 4 kW, 400 VAnflung swivel 0-45Suction connection 150 mmWeight 570 kg

AD planing machine Hammer A3-41, very good condition, year 2023, 4 kW motor power, 1800 mm table length, 410 mm table width, incl. spiral planer shaft, 230 mm thickness planerPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-41, built in 2019, very good condition, incl. reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 knives, 350 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Felder AD741, very good condition, year 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, good conditionPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Holzprofi FS41N all incl. very good condition, incl. reversible blade, 2 speeds and feed 6/12 m, 4 kW, 1850 mm table length, 410 mm table width, 4 knives, approx. 470 kgPrices subject to change, errors, printing and typesetting errors excepted

AD planing machine Hammer A3-31, year 2018, very good condition, very little used, 310mm planing width, incl. 1 set of replacement knives (reversible knife), 3 kW, 3 knives, 300 kgPrices subject to change, errors, printing and typesetting errors excepted

Technical data:Total table length 2350 mm, thickness table length 1000 mm, stop ruler 1500x180 mm, knife shaft diameter 120 mm, number of knives 4, knife length 550 mm, dressing stop swivel 90 - 45, feed speed 6/12 m/min, max. chip removal 6 mm, motor output power 5.5 kW (7 kW S6), weight 920 kg, with automatic star delta switching.Options: - Motor output power 7.5kW (9.5 kW S6)- electric table lift; - 2 under-table roller - Digial height display of the thickness table - Knife adjustment gauge

Professional Holzprofi Maker edge belt sander with pivoting grinding device up to 90°, height adjustable cast iron table, mitre gauge adjustable at both sides, graphit band rest, rubberized grinding cylinder, cast iron table for round grinding is included in the price. Technical Data: Engine power 2,2 kW Grinding cylinder support Ø 38, 50, 76 mm Voltage 400V Table length 900 mm Table width 300 mm Table height adjustable ca. 905 - 1027 mm Band length 2770 mm Belt speed 16m/sec Weight 225kg

Holzprofi Maker oscillating edge belt sander, a solid sanding machine for craft and business Technical data: Band dimensions 2260 x 150 mm Engine power S1: 2,2 KW , 400 V Table length 750 mm Tabhle width 250 mm Belt speed 16 m/sec Space required 1325 x 570 mm Extraction connection 100 mm Weight 156 kg

The new cylinder brushing and grinding machine from Holzprofi Maker can be quickly and easily converted from a grinding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and features: - A wide range of surface treatment options - Easy and quick conversion from grinding to brushing - Many different brushes available for a variety of effects and editing options - Infinitely variable feed and roller speed for perfect results - Workpiece width up to approx. 1100mm - Precise adjustment of the grinding height for consistent results Technical data: Grinding width: 560 mm (1120 mm) Grinding height: 3 to 75 mm Roll diameter: Ø132mm Table dimensions: 592x530mm Dimensions of the table extensions (2x): 582x245mm Roll speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min ØSuction connection: 100mm Engin ...

Demonstration machineThe professional brushing machine for surface finishing, fine grinding, structuring, fine sanding and other finishing work.The surface depends on the tools used.Standard version:Independent height adjustment 1st and 2nd unit, 2 rubberized pressure rollers height adjustable,scale with display of roller height,Roll height electrically adjustable,Machine is CE compliantTechnical data:Working width 400 mmmax. Diameter of the tool 300 mmClamping shaft D=

Technical data:Working width 600 mmmax. Diameter of the tool 300 mmClamping shaft D= 40 mm2 Feed speeds 4.5 / 9 m/minEngine output S1 at 100% 2 x 5.5 hp (4 kW) Max. workpiece height 300 mmRotation of the work rollers 950 rpmBrush diameter 120 - 300 mmTotal weight 820 kg

4-fold combi hammer C3-31, standard equipment, 2000 mm table length, 3 knives, approx. 450 kgPrices subject to change, errors, printing and typesetting errors excepted

Demonstration machine:Technical data:Grinding width 450 mmmax. Workpiece thickness 125 mmmin. Workpiece thickness 8 mmFeed infinitely variable 2-6 m/minGrinding roller diameter 82 mmSanding belt dimensions 457 x 1003 mmMotor output power 3 kW S6 (2.2kW S1 100% ED)Suction nozzle 100 mmDimensions L x W x H 1030 x 1000 x 1740 mmWeight 215 kg

Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Demonstration machine:Rubber-covered work roller 90 Sh, Motorized table stroke, Automatic switching - star/triangle, Ammeter for current measurement, Sanding belt oscillation, Mechanically adjustable sanding pad, Electronic dimension of table position with digital display, Rubber-covered pressure rollerNoise-insulated and CE approved! Technical data:Abrasive belt length 1900 mmCarpet speed 4.5/9 m/minMotor output S1 7.5 kW speed 950 mmDiameter of the grinding roller 120 mmHardness of the

Machine stand in torsion- and vibration-free design, extremely stable. Grinding unit adjustable up to 45 by means of a handwheel. Abrasive belt - oscillation with separate gear motor. Height-adjustable sanding table to utilize the entire bandwidth. Standard veneer edge sanding device with fine adjustment, contact shoe, relief rollers and stops. Height-adjustable additional table with suction for grinding radii. With spring-loaded strap tension.With table extension. Made in EU. Technical data:

5-speed station wagon Hinkl. 410 mm, good condition, 2.2 kW, 1550 mm, 410 mm table width, 2 knives, approx. 500 kgPrices subject to change, errors, printing and typesetting errors excepted

4-fold combination Holzprofi K5-32-2,0, built in 2012, good condition, 320 mm planing width, 3x3 kW, 315 mm saw blade, 2200 mm cutting length, 102 mm cutting height, 2000 mm format table length, 3 knives, 850 kgPrices subject to change, errors, printing and typesetting errors excepted

5-speed station wagon Holzmann K5-260VF, good condition, standard equipment, 1200 mm cutting length, 3 knives, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

4-speed Kombi Minimax LAB300b, year 2021, very good condition, 3 kWPrice subject to change, errors, printing and typesetting errors excepted

Format circular saw milling machine Hammer B3 Winner, year 2023, same as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kgPrices subject to change, errors, printing and typesetting errors excepted

Sliding table saw milling machine Felder KF700S/03, built in 2006, good condition, incl. folding device for feed and tenon slotted hood, 5.5 kW S6, 3200 mm format table length, 3500,6500,8000,10,000 rpm, 780 kgPrices subject to change, errors, printing and typesetting errors excepted

Circular saw milling machine Bernardo FK2, good condition, 2.2 kW, 450 kgPrices subject to change, errors, printing and typesetting errors excepted