129,109 used machines on RESALE, but how to find them? Machine Search
Key data: 530 mm, 450 mm, 450 mm
5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h
Maho 700 C, built in 1983 Travel X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle holder: ISO 40 Speed: 3150 rpm Spindle stroke: 100mm Weight: approx. 3500kg Control: Philips CNC 432
Pallet feeder PFH-82 4 buckles BCUH-78 2 knives Batch counter Anti-noise hood SBP-66-VE delivery (year 2010) 6 folding rollers changed in 2025.
Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke
Pallet feeder 4 buckles BCUH-78 2 knives Side buckle Batch counter Anti-noise hood SBP-66+MKE+VE delivery (year 2007) Belt delivery Folding rollers changed in 2021, belts in 2024.
6 feeders 1555 1 cover feeder 1529 1 stitching unit 380 – 3 stitching heads HK 75Q 1 three knife trimmer 449 MM 1564 belt delivery 1 MM Apollo 1540 stacker Compressors
Length : 1430 mm Width : 620 mm Height : 1540 mm Shrink tunnel : (l)850 x (h)600 mm Kind of strap : polypropylène Strap width : 12 mm
Long belt grinding machine TYPE: LZG-M-1 Table size 2500 x 1000 mm with speed control •For grinding, matting and polishing steel Strip speed: 5-30 m/s infinitely electronically adjustable by potentiometer Electromotive, maintenance-free table height adjustment; Adjustment range: 350 mm Working area: 2300 x 1000 mm Belt dimensions: 6800x150 mm Motor power sanding belt: 5.5kW Max. table load: 200 kg Steel table structure with wooden slats; Incl. adjustable workpiece stop Table guide by means of hardened and ground guide shaft Ø 35 mm and 6-way ball bearings on each side Dimensions sanding pad: 320x350 mm Central and clear control panel Single-sided large column projection: 1000x350 mm Incl. workpiece lighting Fold-out extraction hood for better dust extraction- Diameter of drive roller: 0 300 mm- Diameter of suction nozzle: 0 180 mm- Air Velocity: 2 25 m/s- ...
Used parts cleaning system MOC 50 for operation with solvent or cold cleaner The machine is equipped with a lifting device with a rotation function, through which a basket is immersed in the degreasing medium using the immersion method, thus cleaning the parts. The heating function of the machine is defective, but this is irrelevant in the case of cold cleaner or solvent-containing medium. The system ran flawlessly until the end. Sale due to new acquisition.
Lid FP4-MA Contur 2 with handwheel ( universal tool milling machine ) BJ 1987
Key data: 5500 , 80
Presse à injecter ENGEL 550 T Type ES1800 Année : 1998 E parfait état de fonctionnement
Key data: 3000 , 702 , 60
Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg
Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm
plate thickness: 8 mm pressure: 60 t notching: width x thickness: 310-310-8 mm mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
#6539 Polar 78 ED Age: 2002 Available: Immediately - Air table - Steal side table left side / Reposal table right side
4000w IPG Loading 8500mm Unloading 6500mm 3D HEAD Under power and can be inspected upon request
turning diameter: 820 mm turning length: 2.000 mm control: SIN 810 D center height over square guideway: 400 mm turning diameter over slide rest: 500 mm x-travel: 540 mm z-travel: 2.100 mm feed x/z-axis: 0,01 - 50 mm/min rapid traverse X-axis: 5,00 m/min rapid traverse Z-axis: 10,00 m/min feeding force facing: 12.500 N power feed longitudinal: 20.000 N spindle turning speed range: 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1: 6,40 - 376 1/min. spindle turning speed - gearbox stage 2: 27,40 - 1.600 1/min. power capacity at 60% / 100 % load: 46,00 / 37,00 KW max. torque at 60% / 100% load: 5.073 / 4.069 Nm constant cutting rate: 1 - 9.999 m/min. spindle head DIN 55027 - Size: 11 spindle diameter in front bearing: 170 mm spindle bore: 128 mm tailstock quill taper MT: 6 diameter of quill: 125 mm quill stroke: 280 mm thread pitch: 0,1 - 400 mm total power requirement: 35,00 kW we ...
Safety control for Trumpf. Suitable for V50 to V200 without Bendguart.
Rego Vario Stainless Steel Stop Machine Rego Model: Vario The machine when it comes to striking! with automatic timer 2 working functions: 1 x stirring / 1 x beating 1 whisk 1 whisk 1 32 litre stainless steel kettle Boiler stroke manual Robust technology Connection 400V, 16A-CEE plug Used machine cleaned Quality from a specialist company! Benefit from over 35 years of experience! Option: Other accessories Ring Gas Burner Maintenance contract Service Package Delivery Instruction / Commissioning
Spiral mixer Diosna SP 120 D Diosna Model: SP 120 D Kneading machine mobile 2 timers, 2 gears Stainless Steel Boiler Flour dust hood for max. 120 kg dough Dimensions: 800 x 1270 mm WxD Connection: 400 V, 32A-CEE plug Used machine cleaned Option: Maintenance contract Service Package E-Box for more security! Delivery Instruction & Commissioning
Squirrel wrapping machine Erka WMA 30 Winding belt width 320 mm for all stalks such as Kornspitz and pretzel sticks, Stainless steel Squirrel wrapping machine mobile Connection 400V, 16A-CEE plug Machine Quality from a specialist company! Benefit from over 35 years of experience! Option: Maintenance contract Feeding device E-Box for more safety Service Package Delivery Instruction & Commissioning
Leftover bread chopper Hommel Rotormat 1000 Super Model: Rotormat 1000 Super "the universal shredder" Stainless steel Powerful Connection 400V,16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: another sieve Service Package Maintenance contract Delivery E-Box for more security! Instruction & Commissioning
DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004
Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel
DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004
TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004
Extruder S 100/24D. Battery head 12 ltr. Nozzle diameter min/max 160 / 330 mm. Clamping force 62 tons. Max. mold size: length 1,300 mm, width 900 mm. Depth 2 x 250 mm. Opening min / max 500 / 1,400 mm
Extruder S 90/24D. Battery head 5 ltr. PLC-Control Blow-CVomand
Stago PB 5010 Age: 2009 4 Spindle Spindle distance 40-250 mm Drilling diameter 2 - 10 mm Drilling depth max. 60 mm Foot pedal automatical Sliding Table
0: 415 l 0: 280 mm weight of the machine ca.: 1,5 t total power requirement: kW dimensions of the machine ca.: m charge load: : for excavate machine without flywheel drive motor and frequenzy regulator gross working tank volume: 600 liters useful volume: 415 liters largest possible workpiece dimension (measured diagonally): 280mm total weight: 1140kg drive power at 1500 rpm: 4kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ultrasonic Banding Machine ATS US 2100 AB; tested and maintained by ATS Germany support; Belt width 75mm; Frame 430x205mm; 2-fold print mark control for printed material; fixed strap length adjustable; Arc air; suitable for paper or foil. Ultra sonic banding machine ATS US 2100 AB; checked by the support of ATS Germany; band width 75mm; frame 430x205mm; Double Print Mark Reader; fix band lenght possible; airing for the frame; used for paper or foil.
max. bar material dia.: 65 mm max. swing diameter: 175 mm max. bar length: 3.000 mm control: System TX 8F travel -x axis: 140 mm travel -z axis: 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- Color Monitor - TouchScreen - Program - Air table - Resopal side tables with air - Spare knife
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Max. drilling diameter ... 63mm Spindle holder ... Morse code 6. Machine weight ... 7100kg Max. vertical arm adjustment ... 950mm Spindle speed ... 11-2000 rpm Main engine power ... 5.5kW Total power requirement ... 8.5kVA The machine is in good condition, possible to test under power.
These are a few key data. - CNC universal cylindrical grinding machine WUG 21 basic machine from CNC-Technik Weiss. (The WUG 21 is a Karstens machine bed on which the CNC is built.) - Year of construction 2008 / max. single-shift - 1000mm tip width - Workpiece headstock and tailstock MK4 - Disc Ø up to 500mm - Lens position 26.5° inclined - Grinding wheel drive with programmable SUG - Grinding headstock can be swivelled manually on air cushions - Window right - Internal grinding device mounted on the back incl. dressing device - Eckelmann control system - DIN programming - Cycle programs - Manual grinding, yes - Automatic dressing - Marposs structure-borne sound for external grinding wheel incl. software package - Grinding wheel spindle and workpiece spindle with V-belt drive
Key data: 1400 mm, 440 mm, 450 mm
Year of manufacture: 1978/ GÜ: 2007 Table dimensions ... 2000x425mm Axis X ... 1400mm Axis Y ... 440mm Axis Z ... 450mm Main engine power ... 11kW Machine weight ... 5170kg L x W x H ... 3920x2520mm The machine is in good condition, possible to test under power.
Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers
Key data: 1500 , 220 , 40
Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg
: max. 800 mm turning length: max. 800 mm chuck: ohne documentation: inkl. Control: weight of the machine ca.: 8 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm control: Liebherr PC-NC max. workpiece diameter: 1500 mm table diameter: 900 mm table bore diameter: 320 mm max. table load: 95 kN power capacity: 30 kW coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm Shaping spindle diameter: 125 mm tool taper: SK 45 DIN weight of the machine ca.: 26 t dimensions of the machine ca.: 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8708 Type: GENOS L3000-e Producer: OKUMA Created: 2021 Parameters: Switch-on hours: 7963 h Hours: 4206 h Maximum turning length: 500 mm Max. turning diameter: 300 mm Maximum main spindle power: 22 kW Maximum spindle speed: 3800 1/min Number of all tools: 12 pieces Weight: 7700 kg Equipment: C-axis Y-axis CNC tailstock Tool probe Powered tools VDI Holder Powered Tool Holders (5 pieces)
workpiece diameter nominal: 2400 mm max. workpiece diameter: 2800 mm max. module: 30 mm control: Siemens Sinumerik 840 D dividing plate diameter: 2200 mm table diameter: 2500 mm Table hole Diameter / depth: 800 / 875 mm max. table load: 40000 kg Table rpm: 4,5 min-1 clamping length max.: 375 mm clamping diameter max.: 350 mm cutter diameter max.: 2800 mm Cutter arbor cone: HSK-B160 swivelling range milling head: + 30/-45° Distance Cutter - Workpiece: 615 / 1600 mm weight of the machine ca.: 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
