moulding machines used for sale

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar

Brand: NEGRI BOSSI Model: NB 62 Tonnage: 62 Year of issue: 7/1997 Transparency between ties: 315x315 Screw diameter: 32 Estimated shot volume: 127 Minimum / maximum mold thickness: 120-350 Core pull: 1 Euromap: 620H-220 Mov. plate travel: 130-310 Air discharge: 2

Sintesi 200 injection molding machine, complete with TRIA crusher Production - Italy. It is in working order, but the processor is faulty (partially replaced by a relay); Locking force in tons - 200 T; Flow diameter 50 mm; Dist. X between posts 530 mm Dist. Y between columns 530 mm Serving size 442 cm³ Serving weight 546 g Material pressure 2058 bar Plate length 790 mm Plate width 790 mm Bimetal screw No Equipped with robot No Robot interface si Number of heating zones 5 Press inlet 650 mm Length x width x height 6200.0 × 1430.0 × 2260.0 Weight 9000 kg

Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ø84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (↔ x ↕): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm

Up to a total of 3 BMB KW 38PI / 3450 machines are sold in perfect condition. Manufactured in 2003. For more information about the price contact me by whatsapp or call. Clamping force 380 T Screw diameter 75 mm Tie bar spacing (H) 1025 mm Tie bar spacing (V) 945 mm Shot volume 1725 cm³ Shot weight 1640 g Pressure on material 2000 bar Robot interface Mould size 250-750mm ------------------- Length x width x height 8405.0 × 2040.0 × 2750.0 Weight 19000 kg

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Krauss Maffei KM 350-2700 C1 Year : 1996 Weight 19000 kg Clamping force : 3500 kN Voltage : 230 Minimum moulding size in mm : 380 mm Mould opening size : 920 mm Tie bar distance : 710 x 710 mm Maximum produce parts with a shot size : 1433 ccm / 1304 gramm Oil to fill in : 740 l Hours of Production : 87,230 Condition : very good Special features : 4 pcs. hydraulic core pull 2 pcs. air valves hot runner 16 zones color feeder connectivity option

Year of production: 2004 Total installed power: 185 kW Max. injection speed: 160 mm / s Max. injection pressure: 1560 bar Screw diameter: Ø76 mm Max. shot weight for PP: 1020 g Mold closing force: 6350 kN Clearance between H x V columns (↔ x ↕): 1060 x 960 mm Mold height min: 450 mm Max. mold height: 1000 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 300 mm Centering rings diameter: 160 mm Max. ejector stroke: 300 mm Form H x V clamping plates dimensions: 1500 x 1400 mm Aggregate volume: 2487 g The diameter of the hole in the mouthpiece: Ø 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

Three injection molding machines Krauss Maffei Model KM200-1000C2 Year of manufacture 2002 Total working hours hours 57344/64716/54374 Total production time h 54540/61077/51379 Origin Germany Closing Unit Closing Force 2000 Kn (200T) Inner width between columns (hxv) 560x560 mm Mold opening way 700 mm Min. Mold height 350 mm Pusher distance 200 mm Pusher forward force 58 Kn Injection Unit SP1000 Screw diameter 55 mm L / D ratio 20 Volume 523 Cm3 Weight (PS) 476 g Pump power 37 kw Heater power 18 kw Weight ca. 10 t Length x Width x Height 5320x1750x2230 mm price for one machine

Robotic - NO Control - B4 Screw diameter - 75 [mm] Specific injection pressure - 1739 [bar] Injection volume - 1657 [cm3] Injection weight - 1508 [g] Injection unit - 2800 [mm] Closing force - 4500 [T] Tool Locking System - Knee System Tool plate size - 1120 [mm] Clearance between columns - 800 [mm] Opening distance - 760 [mm] Maximum distance between plates - 1530 [mm] Ejector stroke - 250 [mm] Pump capacity - 55 [kVA] Tank heating system power - 43 [kVA] Controls and description - ENGLISH Full documentation - YES Hours worked - 76 200 Pickup date - 6 months Dimensions (length x width x height) - 8255 x 1795 x 2330 [mm] Weight - 20 400 [kg] The machine has a new cooler, hydraulic accumulators. The pump is regenerated. The machine will be available in February 2021.

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 600/145 injection molding machine Year 1995 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel ERC 33 injection molding machine Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Engel 330/80 injection press Year 1990 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Arburg 270U 40T closing machine with quality flap 38000 pump hours Spindle D: 18mm Year 2006 Perfect condition and working. Extra: Fasti charger/dryer and two desuperheaters Immediate availability. Dr Boy 22A Machine 18000 pump hours D spindle: 22 year 2004 Perfect condition and working. They sold the two together.

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

Condition: Used Operating hours: ca. 5.300 Clamping force (t): 25 Mould installation height min (mm): 150 Mould installation height max (mm): 225 INJECTION UNIT: IU70 Screw diameter (mm): 22 Stroke volume (cm³): 34 Injection pressure (bar): 2000 CONTROL Selogica direct Screen language CZ / DE / EN Total installed power (kW): 24,5 Total weigh (kg): 1580

Haitian MA13000 injection moulding machine Injection size : 8230 cm3 Screw model : C-D130 Power : 214,55 Kw Distance between column : 130 cm x 130 cm , height : 135 cm Equipment in picture like loader,robot,tower are not included Power : 214,55 Kw

I am selling a Nissey injection molding machine made in Japan in 1989. Closing force 1610 kN Distance between columns 460x460 mm Auger diameter 50 mm Injection volume 353 cm³ Material pressure 1715 bar Installed power 32.3 kW Condition - faulty, reason - they did not find a specialist to configure the hydraulic pump control unit after replacing it with a new one. Price is negotiable

W 86 | BLOW MOULDING MACHINE SIPA YEAR: 1994 SPEED: 4.000 BPH MODEL: SF-08004 NUMBER OF CAVITIES: 4 TYPE: LINEAR PREFORM TIPPER PREFORM HOPPER BOTTLE FORMATS: 1.5 LT SAFETY PROTECTIONS

W 85 | PET BLOWER SIDEL SBO 6 YEAR: 1999 SPEED: 7.800 BPH MODEL: SBO 6 SERIE 2 NUMBER OF CAVITIES: 6 PREFORM TIPPER SIDEL HOPPER AND PREFORM FEEDER SIDEL STAMP NOT INCLUDED SAFETY PROTECTIONS

W 84 | BLOW MOULDING MACHINE SIDEL YEAR: 1998 SPEED: 7.200 BPH SUL 1.5 L MODEL: SBO 6/10 SERIE 1 NUMBER OF CAVITIES: 6 BOTTLE NECK FORMAT 29/25 MM PREFORM ELEVATOR/ORIENTATOR STAMP NOT INCLUDED WORKED HOURS: 47.000 SAFETY PROTECTIONS

W 82 | BLOW MOULDING KRUPP CORPOPLAST YEAR: 2000 SPEED: 24.000 BPH MODEL: BLOMAX 16 16 CAVITIES PREFORM FEEDER

W 70 | BLOWER KRONES CONTIFORM S20 YEAR: 2003 SPEED: 30.000 BPH 20 CAVITIES STAMP NOT INCLUDED CHILLER INCLUDED HOPPER/ELEVATOR INCLUDED PREFORM TURNER NOT INLUDED SAFETY PROTECTIONS

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

Blowing machine SIDEL SBO 16 / 20 capacity: approx. 25.000 bph - by 2,0 ltr. PET bottles year of manufacturing: 2011 working hours: 37.000 max. capacity: 32.000 bph neck type: 38 mm widemouth neck includes: - preform tipper - preform hopper / elevator - Sidel AGR preform disinfection - Sidel Predis Ultra Clean - vulcanic water/oil thermoregulator - electrical cabinet - control panel - Sidel PCC The machine is in an excellent conditon.

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Battenfeld TM-5504500 Injection moulding machine Year 2007 Dimensions of plates and columns : 900 900mm Min. mould dim. / Max. Mould dim. : 400 mm /   720 mm Stroke of Opening : 860mm MOTOR  KW  /   TOTAL  KW 55kw / 75kw

High-speed, high-precision thermoplastic automatic machine of a hybrid” type (electricity + hydraulics) with a feedback system. Installed in 2012, never used (new) PECULIARITIES: • The injection unit uses an AC servomotor to accurately dose the material. • Maximum injection speed – 700 mm/sec. • The machine of this series is ideal for high-precision casting of products for the electrical industry, as well as for high-speed casting of thin-walled products for the packaging sector.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

Installed in 2012, never used (new) The machines in this series have two modes: standard and high pressure mode. In standard mode, the machine consumes a small amount of energy and develops a high injection speed. It is suitable for making PP or ABS products. In high pressure mode, the machine increases the injection pressure to produce products from materials that require higher pressure. Equipped with these two modes, the machine can work on various products. PECULIARITIES: • Wide column spacing and long clamping stroke using square slabs. Convenient for a wide variety of molds. • The injection molding machines are equipped with the new FCS2100 controller with the ability to use options such as semi-closed loop or closed loop, user-friendly graphical interface, fast fault detection, central control of Internet connection.

EMS-95 single-screw extruder, screw diameter 90mm, throughput approx. 200 kg/h (depending on profile size and material may vary). The output width is about 127 cm. Initially purchased for the production of diffusers of all kinds (transparent, partially transparent) for office LED lighting fixtures. Installed in 2012, produced about 1.500 diffusers and has not been used since then

Manufacturer: Negri Bossi Model: 160T V 160 – H 820 Year of manufacture: 2005 INJECTION UNIT Screw diameter: 52 mm Calculated injection volume: 480 cm³. Length/diameter ratio: 20 L/D Maximum injection rate: 220 cm³/s Pressure on the material : 1700 bars Screw speed : 250 rpm Number of temperature zones : 4 N CLOSING UNIT Closing force : 1600 kN Opening stroke : 460 mm Thickness of the mould : 170-550 mm Distance between tie-bars: 510 x 450 mm Plates size : 780 x 730 mm GENERAL Heating power : 18 kW Total installed power: 31 kW Dimension : (WxHxD) 5720 x 2150 x 1500 mm. Weight : 6150 Kg

Type of control: SELOGICA Number of hours: 38,000 hours Closing force: 200T Opening stroke: 650mm Between columns: 570 x 570 mm Tray dimensions: 795 x 795mm Mini/maxi mold: 250 mm Max distance between trays: 1400 mm Injection: Screw diameter: 50 mm Screw length: 20D cm3: 392 Bars: 2000 General: Motor power: 19.9 kW Heating power: 8kw Closing weight: 9T Injection weight: Length dimensions: 5.50 m Width dimensions: 2 m Dimensions height: 2.40 m Options: Cores: 1 Robot interface: yes Bi metal: yes

Screw diameter: 40 mm Calculated injection volume: 220 cm³ Length/diameter ratio: 23.5 L/D Maximum injection rate: 251 cm³/s Pressure on the material: 2030 bars Plastification capacity PS: Kg/h Screw Speed: 175 RPM Hydraulic motor torque: Nm Hydraulic motor power: HP Nb Temperature zones: N CLOSING UNIT Closing force: 1000 kN Opening stroke: 175 mm Min/Max Mold Thickness: mm Max distance between tray: mm Passage between columns: 445 x 445 mm Dimensions of the trays: 630 x 630 mm GENERAL Heating power: kW Total installed power: kW Quantity of oil: l. Dimension: (WxHxD) 5.3 x 1.8 x 1.35 m. Weight: 5230 Kg

Control Type: CC200 Number of hours: 45,000 H Closing Closing force: 50T Opening stroke: 400 mm Between columns: 500 mm x 450 mm Platform dimensions: 500 m x 450 mm Mini/maxi mould: 200 mm Max gap between trays: 600 mm Injection: Screw diameter: 25mm Screw length: 24.8D cm3: 69 Bars: 2400 General: Motor power: 15KW Heating power: 6.8KW Options: Cores: 1 Robot interface: yes Bi metal: yes

INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1830 bars CLOSING UNIT Closing force: 250 kN Opening stroke: 315 mm Mold thickness Mini / Max: 160 mm Max distance between tray: 475 mm Passage between columns: 280 x 280 mm Tray size: 410 x 410 mm GENERAL Quantity of oil: 120 l. Dimension: (WxHxD) 2.90 x 1.65 x 1.03 m. Weight: 1550 Kg