We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,124 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Injection pressure: 2057bar, closing force: 2750kN, stroke volume: 1213cm³, heating output: 30.7kW, length: 8425mm, height: 2545mm, weight: 14t, operational hours counter: 5002h.
used
Clamping force 250t, clear tie bar width: 560mm, operating pressure: 190bar, weight: 10.7t, with documentation, an inspection is possible.
used
Clamping force 350t, clear tie bar width: 710mm, operating pressure: 190bar, weight: 16t, with documentation, an inspection is possible.
used
There are two Ferromatik Milacron K-TEC 250 available, clamping force: 2500kN, injection pressure: 2258bar, stroke volume: 441cm³, engine power: 55kW, weight: 16.5t, operating hours of machine 1: 84,365h, on-site inspection is possible, without accessories.
used
Connected load: 62kW, operational hours counter: 77,112h, with Robot MultiLift, an inspection is possible.
used
Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible.
used
Clamping force: 200t, max. operating temperature: 400°C, clamping plate dimensions: 1020x605mm, min. tool installation height: 680mm, opening path: 400mm, max. tool weight: 3,2t, shot weight: 50- 600g, screw diameter: 55mm, L/D20, with 2x core puller hydraulic 1-fold, 2x core puller pneumatic, 1-fold mold temperature control, standard up to 90°C, an on-site inspection is possible.
used
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
used
Clamping unit: approx. 26000kg, injection unit: approx. 15000kg, max. total weight of the mold: 11400kg. Hydraulic oil: (2010dm³) approx. 1800kg. Dimensions X/Y/Z: approx. 10000mm/2650mm/2450mm.
used
max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg.
used
Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible.
used
Clamping force: 2000kN, drive power: 37kW, injection volume: 377cm³, melt pressure: 1600bar. Screw diameter: 50mm, control: MC4 32-bit microprocessor control, nozzle type: R 15. Dimensions X/Y/Z: approx. 5160mm/1900mm/2240mm, weight: approx. 10000kg. Without oil filling and material conveyor/material hopper. Available from August, 2024. Documentation available. On-site inspection is possible.
used
Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.
used
Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t.
used
Screw diameter: 55mm, max. injection weight: 434g, max. injection pressure: 1720bar, clamping force: 2200kN, min. installation height: 250mm. Dimension between the platens: 900mm, max. opening stroke: 750mm, centering bore nozzle side/ejector side: 125mm/125mm. On-site inspection is possible.
used
Platen dimensions: 1700x1250mm, with documentation, an inspection is possible.
used
There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t.
used
Blowing moulding machine SIPA 4 cavities • Year: 1998. • Speed: 4.000 bph. • Model: SF 8/4. • 4 cavities. • Format available: 0.5 lt - 1.5 lt - 2.0 lt. • Preform loader. • Preform tipper. • Complete with air recovery system. • Safety protections.
used
Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021
used
Screw diameter: 50 mm Displacement volume: 471 cm³ Spray weight in polysterol: 405 g/hp Injection pressure: 2,058 bar Clamping force: 200 t Lights Spar spacing H x V: 560 x 560 mm Tool installation height min.: 300 mm Opening distance: 750 mm CONTROL: IQT Screen text: german / german Operating instructions: german / german FHK interface for robots: Yes Core pull: 2 Pump drive power: 37 kW Total connection value: 58.8 kW Total weight: 9,000 kg Dimensions L x W x H: 5.5 x 1.9 x 2.4 m Terms of payment: 100 % before taking over the machine, purely net
used
Inv. Num. : 6167 Type: GUIDANCE LWF 1300 -SV Producer: Leadway Created: 2016 Parameters: Clamping force: 130 t Screw diameter: 35 mm Distance between stands: 470x420 mm Ejector force: 45 kN Screw stroke length: 120 mm Mould height: 450 mm speed: 320 1/min Machine length: 4900 mm Machine width: 1400 mm Machine height: 1850 mm Spray weight: 5300 kg
used
screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Blowing machine SIDEL SBO 14 / 14 Universal year of manufacturing: 2006 neck type: 28 mm PCO 1810 capacity: 22.000 bph Electric: Siemens 400 Working hours: approx. 40.000 hours
used
Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net
used
Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net
used
SECOND-HAND HYDRAULIC BENDING PRESS MM. 2400X1300 - Platens mm. 2400X1300 - Opening mm. 1200 - N. 2 cylinders - Top bottom movement
used
Inv. Num. : 6315 Type: Allrounder 320 C 500 Producer: ARBURG Created: 2007 Parameters: Operating hours: 53.740 h Clamping force: 500 t Screw diameter: 30 mm Capacity oil container: 120 l Oil type: OPTIMA 32ZFP
used
Injection mould for round plastic bucket 5.5 litres Mould information: Weight: 449kg Dimensions of the mould (mm): Φ=420, Φ1=500, H1=415 Number of cavities: 1 Centering ring (mm): Φ 160 Availability: Immediate Current condition: out of production, can not be seen while working Bucket information: Volume: 5.5 L Brimfull Volume: 5.9 L Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 231 / Ø 235 / Ø 195 Height (mm): 190 Weight bucket (g): 220 ±5 Delivery time: To be agreed Guarantee: Without guarantee Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number to the lid of bucket (161549342) Number of the handle of bucket (161595367) Contact number: 0038651213228
used
Injection mould for round plastic bucket 5,5 L information: Weight of the mould: 505 kg Dimensions of the mould (mm): Φ=440, Φ1=500, H1=420 Centering ring (mm) (Φ): 160 Number of cavities: 1 Current condition: can not be seen while working Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Information about product: Volume (litres): 5.5 brim-full Volume (litres): 6 Dimensions – diameter top/bottom (mm): Ø 236 / Ø 205 Height (mm): 173 Weight (g): 200 ± 5 Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number of the handle of bucket (search: 161595367) Contact number: 0038651213228
used
Injection mould for round plastic bucket 6.5 litres information: Weight of the mould: 480kg Guarantee: Without guarantee Dimensions of the mould (mm) (Φ, Φ1, H1): Φ=420, Φ1=500, H1=480 Current condition: Not running, can not be seen while working Availability: Immediate Delivery time : to be agreed Centering ring (mm) (Φ): 125 Product: Round plastic bucket 6.5 litres Number of cavities: 1 Information about product: Bucket catalogue number: 1VM6501 Volume (litres): 6.5 Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 230 / Ø235 / Ø 195 height (mm): 225 weight (g): 247 ±5 Lid catalogue number: 1PV0506 Weight (g): 79±2 BUCKET INSERTS: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER LID INSERTS: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the lid of buck ...
used
Injection mould for lid of 5,5 L and 6,5 L plastic round bucket: Weight of the mould: 191 kg Dimensions of the mould (mm): Φ=400, H=270 Number of cavities: 1 Centering ring (mm) (Φ): 125 Lid weight (g): 85 ±2 Current condition: ready to work Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Lid inserts: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the bucket 5,5 L (search: 161523670) Number to the bucket 6,5 L (search: 161530621) Number of the handle of buckets (search: 161595367) Contact number: 0038651213228
used
Information about mould: Weight of the mould: 280kg Dimensions of the mould (mm): A = 445, B = 295, C = 225 Centering ring (mm) (Φ): 99 Number of cavities: 2 Current condition: operational, can be seen while working Availability: immediate Delivery time: to be agreed Guarantee: without guarantee Information about product: Dimensions (A, B, s) (mm): 254, 145, 9 Weight (g): 20g ± 1 g Contact number: 0038651213228
used
Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph
used
Prefamac PMOU80 Moulding machine 2011, stainless moulding machine, 80Kg capacity, adjustable temp control, with vibrating table, 1Ph
used
Stretch blow molding machine from Etek ISBM Line = Injection stretch blow moulding Stretch blow molding machine for non-returnable PET bottles made of PET preform blanks Stretch blow molding machine for production using the rotary transfer process Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of construction: 2012 Power: 90 kW Mains connection: 400 volts , 50 Hz Weight approx. 6000 kg as good as new; used
used
Clamping Force: 210 ton // Mould Height (Max): 790 mm
used
Preform Weight (Max): 32,5 // Neck Type: PCO
used
Preform Weight (Max): 17 g // Neck Type: 30/25
used
Accumulation Head Capacity : 3 l // Number Of Heads: 1
used
Accumulation Head Capacity : 1,8 l // Number Of Heads: 1
used
Number Of Stations: 48 // Output (caps/min): 50000
used
Moulding machine / milling machine Olma for profiles 2 spindle 30 + 45 mm High-speed locking The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Clamping force: 110 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 50 mm Injection volume: 393 cm3 Injection weight in PS: 358 g Pressure on material: 1892 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7800 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 8 Pneumatic valves: 1
used
- Unilog B4 control - Year: 2004 - Injection unit: .../1900 - Screw diameter: 65 mm - Specific injection pressure: 1777 bar - Injection volume: 1078 cc - Injection weight: 981g - Tool closing system: 3500/... - Closing force: 350 t - Tool plate dimensions: 1010 x 1010 mm - Clearance between columns: 710 x 710 mm - Tool height: 300...710 mm - Opening distance: 670 mm - Max. Distance of plates: 1380 mm General information: - Dimensions (m) LxWxH: 7.60 x 1.80 x 2.40 m - Weight: 15,300 kg ROBOT - Year 2005
used
BOY 55 silicone injection moulding machine. Top condition used for technical service lab and never used in production. Description Features of the Boy 55A Procan CT Procan CT control Boy configured from factory for silicone. Hydraulics, closed loop with 35mm radius shut off nozzle. Clamping unit. 42 mm LSR silicone plasticising unit. 2 station Air ballast. Anti vibration mounts. Watercooler for barrel available Perfect condition. Used for lab samples only. All offers considered. Purchaser collects.
used
Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 à 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: â¤190 mm - maximum bottle diameter: â¤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: â¥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]
used
Machine dimensions Length 5840mm Width 1420mm Height 2180mm Weight 6600 kg Closing system Knee closure type Clamping force 210 t Ejector stroke 100 mm Mold height max 600 mm Mold height min 200 mm Clearance between columns 500 x 500 mm Injection system Screw diameter 52 mm Max injection pressure 175 MPa Max injection volume 548g Max injection speed 170 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push Robot connection Optional Apex robot Vickers hydraulic valves CNC control
used
Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance
used
Machine dimensions Length 4700mm Width 1300mm Height 1980mm Weight 1300 kg Closing system Knee closure type Clamping force 120t Ejector stroke 100 mm Mold height max 400 mm Mold height min 150 mm Clearance between columns 410 x 410 mm Injection system Screw diameter 41 mm Max injection pressure 158 MPa Max injection volume 188g Max injection speed 84 cm3/sec Additional equipment 2 hydraulic cores + extractor Air push CNC control