We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,272 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Max. speed: 90 bags/min.
used
Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.
used
Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.
used
Compressed air supply: 6bar, connected load: 7kW.
used
Working height: 820-900mm, max. film width: 550mm, output: 60 cycles/min, product width: 25-450mm, product height: 2-200mm, product length: 80mm to unlimited, connected load: 3kW, length: 2140mm, width: 1450mm, weight: 650kg, with documentation.
used
Max. Output: 300cycles/min, max. stacking speed: 30packs/min.
used
Output: 21 bags/min, the screen is defective.
used
Product width/ height: 20-400/ 200mm, max. output: 60 cycle/min.
used
Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.
used
Hopper capacity: 80l, starting width: 200-230mm, connected load: 1kW, length: 4500mm, width: 1100mm, height: 1733mm, weight: 1.1t.
used
Resolution: 1440dpi, working width: 1600mm, number of colors: 4, length: 2698mm, width: 845mm, height: 1600mm, weight: 182kg.
used
A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m².
used
Load capacity: 2500kg, unladen weight: 4115kg. The forklift is still in use and in perfect condition.
used
One forklift including charger. Operating hours: approx. 22000h. Battery defective. Documentation available.
used
Lifting capacity: 2500kg, lifting height: 5000mm, fuel: gas, operating hours: 19621h, weight: 3865kg.
used
Max. total load: 5t, weight: 8.89t, without accessories, spare parts or documentation, was maintained regularly.
used
Load: 1.1t, battery weight: 1.065-1.175t, motor power: 5kW, weight: 4.14t, operational hours counter: 2580h.
used
Including battery charger.
used
The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.
used
Max. load: 910kg, weight: 2.93t.
used
Nominal load: 8t, weight: 12.3t, operational hours counter: 5166h, including three meter long forks, without documentation.
used
Max. load: 5t, lifting height: 4100mm, installation height: 2971mm, free stroke: 150mm, tires: Super Elastik solid rubber 300-15, Super Elastik solid rubber 250-15, operating hours: 15,200h, with overhead guard SDFHT full cab, heating and air conditioning, double auxiliary hydraulics and pallet clamp Meyer, an on-site inspection is possible.
used
Load: 2.5t, lifting height: 3220mm, length: 2262mm, width: 1199mm, height: 2230mm, weight: 4.4t, an on-site inspection is possible.
used
Load: 7.7t, max. stroke: 3200mm, weight: 5.8t.
used
There are two identical electric forklifts available, connected load: 7.6kW, weight: 8.17t, operating hours of machine 1: 24,063h, on-site inspection is possible.
new
Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
new
Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
used
Universal - folder former make RAS type 22.15Built in 1970Profile height max.:20 mmMaximum bandwidth: 60 mmNumber of reel stations: 7Sheet thickness at 400 N / mm2 max .: 1.5 mmProfiling speed approx. 14 m / minPower requirement: 3 kWOperating voltage: 400 V, 50 Hz, 3 Ph.Dimensions approx: 1670 x 480 x 1005 mmWeight approx. 300 kgWith- Profile rolls for Pittsburg fold and standing seamused, from an operating resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Crane fork Fabr. PFAFF type LM 2/20Fabr. -No: 800471/1 Year 1998Capacity: 2000 kgLoad center distance: 0.5 mFork length: 1100 mmFork width max: 1000 mmWeight: 153 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric forklift make KÖTTGEN type ESK 1000 / 2SGSMachine -No: 43602, built in 1987/92Load capacity: 1000 kgStroke: 5200 mmwith battery: DETA 4 Pz S 400 80 Vand charger: DETA D 80 v 60 Aused in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tiller-guided electro-hydr. Tool lift Fabr. BAKA type EGV 60/605Masch. -No: SOE 27555 built in 1998 with drive Load capacity: 700 kgTable size: 1400 x 600 mmretracted height: 800 mmextended height: 1100 mmStroke: 300 mmBattery power: 24 VDead weight: 400 kgOutside dimensions approx: 1900 x 600 x 1100 mmWith- Battery 24Velec. Travel drive- Emergency stop switchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric forklift make STILL type EFG 12Machine -No: 09261065, built in 1972Payload: 1200 kgMax. Lifting height: 4000 mmFork length: 1400 mmNet weight: 2410 kgpermissible total weight: 4.0 tHeight with retracted mast: 2150 mmWidth: 1000 mmWith- Battery 24V / 700 AKxa0xa0 12 cells / 605 kg, year 4/90- Duplex mast- chargerdespite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Diesel forklift make LINDE type H 60 DWFabr. -No: 329C95002680 built in 1992Technical specifications:Lifting capacity: 6.0 tDead weight: 10060 kgLifting height: 4.0 mDimensions approx: 5800 x 1850 x 2600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock
used
New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm
used
Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K Year of construction 1994 Operating hours 42,.650 hours, stand September 2022 Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Filling volume 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm, lenght variable Drive power 2 x 30 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 16 tons/hour bulk weight of 50 kg/cbm approx. 25 tons/hour bulk weight of 100 kg/cbm approx. 47 tons/hour Bale weight with a bale length of approx. 1.2 m approx. up to 1400 kg, depends on material Filling volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX 47 Effektive transport dimensions only baler 11,850 x 2,600 x 3,470 mm (l x w x h) Transport weight baler 38.5 tons Condition of the baler: The machine was ...
used
- Installed 03-2008 - RIP program Trueflow 3 with 1 bit tif - Exposure hours from the laser 3.052 ( Total 51285 plates ) - Semi-automatic plate feed with the help of the plate loading table - Large and multi-format output – from 4 pages to 32 pages - 2 x inline Punch Bacher 2000 ( double exposure two Plates simultaneous and punching ) - 14 plates/hour 2,032 x 1,270 mm - 17 plates/hour 1,524 x 1,143 mm - 30 plates/hour: 1,030 x 800 mm (exposure of two Plates simultaneous ) - Innovative 512-channel GLV exposure head enables high-speed exposure of large-format plates or two side-by-side mounted panels Plates up to the size of 1,160 x1,270 mm. - Resolution: 1200 / 2400 / 2438 / 2540 dpi - - with GLUNZ & JENSEN Quartz III 150 plate developer - with forklift
used
Used Koppens forming, buttering and predusting line is a great solution for every production plant who is specialized in making meat burgers. The line consists of Koppens VM 600HD EasyFormer, Koppens ERT 600 wetcoater with mixer and Koppens Optiflour preduster. The complete line allows to form meat burgers and cover it with coating both wet and dry (flour/flour with spices) Belt width: 600mm Efficiency: up to 50 strokes/min
used
Thermal VLF CTP Avalon N16-50 XT 510,000 plates produced Year : 2013 with MAL 16000, year 2009 with Processor Quartz III 125 with Stacker NO RIP
used
Crane arm for forklift STABAU Type KR 15 Fabr. No. 003-14276 Year of construction 1986 Nominal load 1500 kg load capacity at 450 mm radius 1500 kg load capacity at 750 mm radius 1100 kg load capacity at 1200 mm radius 750 kg Suitable for fork carrier FEM 2 = 403 mm Load hook adjustable in 6 steps Total height of the crane arm 1350 mm Boom profile 110 x 110 mm on mobile transport frame good condition; used
used
Tilting container, tipping container for forklifts Chip bucket - Hopper - Folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Tine distance inside/outside: 160/600 mm- manual tilting device via hand lever - 4 pieces plastic fixed castors 175 and, 2 pieces steerable- foldable trailer drawbar - drive-in bracket/forklift holder Net weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm good condition Suitable for collecting, storing and transferring recyclable materials; used
used
Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used
used
Electronic crane scale MWT Type 142 Fabr. No.: 142571 Year of construction 1993 Traction measuring device, crane scale Measuring range: 2,500 to 80,000 kg Smallest measured value: 20 kg Power supply via 12 volts Battery suspension shackle for double hooks, anchor hook operation, storage of measured values and tare via remote control - Memory for measured values (weights) - Printer for measured values very solid and high-quality body made of steel Net weight: approx. 200 kg ; used
used
used
Electric forklift JUNGHEINRICH type EFG 216 Serial No. FN413671 Year of construction 2011 Load capacity 1600 kg Lifting height 4800 mm Fork length 1220 mm Fork carrier width 980 mm Construction height 2120 mm Operating voltage 48 Volt- Triplex mast with full free stroke 1550 mm - hydraulic side shifter - 2 travel speeds - Battery from year of construction 2015, type 06 EPZS C750 SC (48 Volt, 750 Ah) - Automatic charger, 48 Volt - 3-wheel solid rubber - Tyres front 18 x 7-8, rear 140/55-9 - according to operating hours counter 14725 operating hours read - Auxiliary steering - Work lights front - New TÜV - UVV inspection Length without forks 2000 mm Total width 1080 mm Net weight without battery 2390 kg Net weight with battery 3480 kg ; used
used
Type 5 Nominal weight of falling parts 1750 kg Impact energy, not less than 4878kgm Number of strokes per minute 85 Max. ram stroke 890mm Diameter of ram 455mm Ram pallet face 405x305mm Anvil pallet face from floor 535mm Height above floor 4040mm Baseplate 4405x2085mm Motor rating 110 kW Weight 40000kg Weight without anvil block 25000kg
used
Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR