moulding machines for used for sale

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

turning diameter: 520 mm turning length: 1500 mm control: Fagor total power requirement: 15 kW weight of the machine ca.: ca. 3,5 t dimensions of the machine ca.: L/B/H 3,50x1,50x180 m more info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough dividing machine Fortuna Automat A3-30 - 30 Division - with 3 ratchets - with active circuit switch - electric head - Weight range dough pieces 32-80 grams - Dough insert per ratchet 960-2400 grams - Weight of the machine approx. 540 kg

Those dough dividers and rounders allow you to make 30 identical products in 1 work cycle. The products can be cut into pieces or rounded - depending on your needs! Weight ranges: Fortuna 3: 32-80 g Fortuna 4: 40-110 g Both machines are available both in semi- and in full automat. If you have any questions, don't hesitate to contact me via phone, mail or whatsapp!

table length: 600 mm table width: 400 mm x-axis: 400 mm y-axis: 300 mm z-axis: 350 mm workpiece sizes: 900 x 630 x 350 mm volume: 490 L total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging Machine, Rose Forgrove, FLOWPAK,

Key data: 510 mm, 2250 mm, 4 St.

Specifications/Equipment: - Planing width 510 mm - Chip removal max. 8 mm - Table length 2250 mm (dual folding system with spring support) - Swivel dressing fence with parallelogram guide - Dressing protection "Comfort" - 4-knife system planer shaft, 510 mm - Speed 4,600 rpm - Suction nozzle Ø 140 mm - Connection: 400 V, 50 Hz, 3~, 5.5 kW - Weight approx. 700 kg

Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 36 pcs Weight: 125 kg

Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 730x390x900 mm

Spiral dough mixer Container capacity (capacity): 32 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 12.5 kg Bowl Capacity: 32 liters Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 750x435x900 mm

Spiral dough mixer Container capacity (capacity): 40 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 16 kg Bowl Capacity: 40 liter Mixing Speed: 150/200 r/min Bowl Speed: 15/20 r/min Voltage: 220V/380V 50Hz Electric Power: 3 kW Machine Size: 800x480x1000 mm

Dough mixer Container volume: 80 liters Dough mixers are intended for professional use in the bakery and catering industry They are used to prepare primarily dough, but they can also be used to prepare other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger amounts of dough continuously They consist of a container for ingredients and a mixing tool (spiral) Features: Flour capacity: 30 kg Test capacity: 50 kg Container capacity: 80 liters Mixing speed: 125/250 rpm Bowl speed: 12.5/25 rpm Voltage: 380V 50Hz Electricity: 3.5kW Machine size: 950x590x1100 mm Weight: 290 kg

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

Verbufa Forming Machine with Integrated Flattening Belt (MBF COEX) The latest series of Verbufa COEX forming machines with wide conveyor belt and integrated flattening belt is the solution for a high production capacity of filled products. The MBF COEX machine has been specially developed for the intelligent and efficient shaping and portioning of stuffed products such as potatoes, cheese, meatballs and croquettes. With the integrated flattening belt, this forming machine is also ideal for the production of stuffed burgers. The MBF is available with 2 to 16 product streams and a conveyor belt of 400, 600, 800 or 1000 mm width. Demonstration/demonstration machine of a factory representative

The MBF with integrated flattening belt was specially developed for shaping handmade burgers, tartare and minced steak. In addition, this machine forms a wide variety of products into balls, discs and sticks. The Verbufa wide conveyor belt forming machine guarantees a high production capacity. In combination with the Handtmann vacuum filling machine and the Verbufa fill flow divider, a very high and consistent weight accuracy is guaranteed. This not only ensures lower costs, but also contributes to more sustainable production. Demonstration machine/demonstration machine of a factory representative

used Fortuna head machine KM6, 6 rows with Mehler. Easy cleaning of the parts because it is easily accessible. Capacity up to max. 4800 pieces/hour Weight range of the head machine between 35-80 grams. Dividing and shaping doughs as if by hand. Trade-in and shipping on request. -Stainless steel - 6 rows - Weight range 35-80 grams - Flour shakers

Dough dividing and rounding machine Fortuna Primus Pro head machine - Dough dividing and casting machine - Fortuna Primus Pro - 4 rows -Stainless steel - Voltage: 3x400+N Volt - Power: 1.9 kW - Frequency: 50Hz - Required fuse: 25 A - Year of construction 2013

Manufacturer: Bat Forum, Year: 2008, Foil stations: yes, Shrinking tunnel mm: 1400, Total connection value in kW: 4, Working width mm: 800, Year :2008

Bar diameters 8-10-12 mm Maximum Bending Angle: 180° Maximum Pulling Speed 144m/min Bending lenght : 1650 mm

FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...

Edge banding machine FORMAT 4 Tempora 60.06 Touchscreen swivelling control panel, Program memory, automatic pressure bridge adjustment, Feed by means of a transport chain, Pull-out workpiece support, Diamond joining milling cutters in synchronous and counter-rotation, glue basin below, Changing device for glue basins, Use of PUR adhesives possible, printing unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be swivelled pneumatically, Flush / radius milling unit, motorized positioning control of the milling unit, x-motion PLUS, Corner Copy Unit, Radius Drawing Blade, Radius scraper blade with motorized positioners, Wing scraper, Operation-controlled surface pulling blade, Spraying device release agent, Spraying device lubricant, Spraying device cleaning agents, -----Specifications----- Edge thickness roll stock: 0.4 - 3 mm, Workpiec ...

Machine is in good technical condition, a visit and a test run are possible by prior arrangement.

gebr. Belt sander, Fabr. Format, Type BS 75 Built in 1999 Grinding width 75 mm with various abrasive belts

Power Pack generator power 60 A Table size (width × length) 350 mm × 600 mm Travel (X × Y × Z) 400 mm × 300 mm × 300 mm Control: CNC Incl. extinguishing system

Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm

gebr. Stone Forming Machine/Board Paver, Manufacturer Zenith Type 860 AZ Production of core & attachment Simatic S5 control system with vitalization from Zenith Board size 1,400 x 950 mm max. production height 14 cm Quick Forming Clamping Pneumatic incl. complete circuit with: Aerial ladder Vehicle Group Drying rack Countersunk ladder Stone Remover Packager Board stacking transverse transport Board stacking device Board tray Parcel trolley circulation Parcel Magazine Horizontal strapping

Log band saw Pilous CTR750EV, very good condition, 5.5 kW, S6 7.5 kW, 3.6 m cutting length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Hydraulic log band saw Forestor CTR800H incl. the following accessories:3m extension section, chain log turner, log lifter hydr. rotatable, stem lifter hydr. with drive, saw blade tensioning device, 11 kW motor, pre-cutting device, ammeter, saw blade guide electrically adjustable, LG automatic, irrigation pump with automatic switch-onPrices subject to change, errors, printing and typesetting errors excepted

Log band saw Pilous CTR750EV, very good condition, rails new, 5.5 kW, 4100 mm belt length, 460 kgPrices subject to change, errors, printing and typesetting errors excepted

Log band saw CTR710M, built in 2013, 12 m cutting length, incl. LG 100 and scoring machine, 6 kW, 550 kgPrices subject to change, errors, printing and typesetting errors excepted

Exhibition / demonstration machineThe new Pilous DB700Automatic double edger is characterized by the best functionality and long service life due to its solid construction. 3 driven steel feed rollers at the bottom, 2 rotating pressure rollers with rubber coating at the topWith control panel for automatic saw blade adjustmentNumber of saw blades can be expanded as required2 return rollers on the machine for easy operations4 rows of anti-kickback technologySeveral emergency stop switchesEasily positioned scale. Saw shaft made of extra hardened premium

Log band saw Hauslhof CTR800Hydraulics, demonstration machine, Bloch diameter up to 830 mm, total length 5800 mm, width 2300 mm, with hydraulic system for clamping, clamping, turning and lifting the Bloch Motor output power total at 100% ED 10 KwIncluding:CTR800H-Ver3CTR800H-KSDCTR800H-STHCTR800H-STH-VCTR-SSPCTR- 11CTR-VORCTR-AMPCTR-EGLCTR-LG AutomatCTR-Pump-EA

Demonstration machineThe new, state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper partincl. Pre-cutting device! For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. stem diameter

Demonstration machineSolid log band saw for a log diameter of up to 71 cm with extension sections that can be extended indefinitely. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. 3.8 inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE approved. Technical data:max. trunk diameter 71 cmmax. Board width 67 cmEngine output S1 5.5kW section length basic version 2.1mCutting length

Exhibition / demonstration machineThe new state-of-the-art, solid log band saw from Holzprofi is for a log diameter of up to 75 cm and offers many possibilities to cut your wood and logs correctly. Highest cutting accuracy thanks to cutting thickness calculator, galvanized lower part, powder-coated upper part For all types of wood, logs or waste wood. can be expanded indefinitely with extension sections. CE approved. The original!, not a replica Technical data:max. trunk diameter 750 mmmax.

Demonstration machineExtra strong, solid, durable log band saw for a log diameter of up to 1000 mm. Soft starter is included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator's desk. With telescopic lever log turner, log lifter, log jack with drive for horizontal log feed. Hydraulic angle stops.2 pieces of stem clamping tool. hydraulic saw blade tension. Electrically adjustable saw blade guide. CE approved.