138,015 used machines on RESALE, but how to find them? Machine Search
WTT Conveyor Technology Scissor Lift Table E.20.13.8.2.0-RB controlled with infeed roller conveyor 1,200 daN, Practically still like new, L2500mm W 900mm Year of manufacture 2007 Useful stroke 800mm Load capacity 1200kg
Weinig 806-255 Conveyor belt Manufacturer: Weinig Year: 1998 Total beltlength: 7.000 mm Width belt: 3000 mm
Numbering units Leibinger Gradsteller / Quersteller / Forwards / Backwards xx099-1 Numbering Units Leibinger Gradsteller rückwärts / straight Backwards xx099-2 Numbering Units Leibinger Gradsteller vorwärts / straight Forwards xx099-3 Numbering Units Leibinger Quersteller rückwärts / convex Backwards xx099-4 Numbering Units Leibinger Quersteller vorwärts / convex Forwards
2x Mobile conveyor system for unloading trucks / swap bodies etc. – used - : Price per piece from location: only 950.-€ (net), incl. loading! When buying both systems, we add a non-driven roller conveyor! Approx. 4x 3m, rollable with feet! A system consists of 2 belt conveyors (driven) and a roller conveyor that are plugged together / extended. Of course, only one belt conveyor and the roller conveyor could be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile Conveyor System Year of manufacture: 07.2011 SERIAL NUMBER: 3447 Element width: approx. 80cm Strap width: approx. 65cm Length of belt element: 4.10m, Length of roller conveyor: approx. 5m Total length when all 3 elements are assembled: approx. 13m! Roll diameter approx. 5cm, roll length approx. 60cm Height: approx. 75cm Connected loads: 400V/50Hz 16A Condition: good Available: immedia ...
cutting diameter: 360 mm saw band length: 4870 x 41 x 1,3 mm cutting width: 360 mm cutting speed: 11 - 110 m/min : 4,0 kW height of the workpiece: 800 mm weight of the machine ca.: 2,1 t dimensions of the machine ca.: 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW? Fence / Near 11 kW ? Top 7,5 kW ? Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included
pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm It is a hydraulic machine.
Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away
Used blow moulding machine made by KRONES model Contiform S18. New 2004. It has 18 blow moulding stations. The maximum blow moulding speed is 24,000 bottles per hour for the 2.0 l format and 28,000 bottles per hour for the 1.5 l format. In February 2024, the machine was upgraded to support the PCO 2622 thread. The blow moulding machine has an integrated control system with visualisation in Polish, English and German. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic glycol cooler, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air transport conveyor.
Used blow moulding machine made by SIPA model SFR24. New 2007. It has 24 blow stations. The maximum blow speed is 38,000 bottles per hour for the 1.75 l format and 41,000 bottles per hour for the 1.5 l, 1.25 l, 1.0 l and 0.7 l formats. The device has an air recovery system and linear optical control for testing the quality of preforms. Supported thread type: PCO 1881. The blow moulding machine has an integrated control system with visualisation in Polish, English and Italian. A complete set of documentation is included with the blow moulding machine. The blow moulding machine includes: an automatic air-cooled chiller for supplying the machine with cooling water, an automatic preform feeder, an automatic preform basket tipper and a bottle ejector mounted on an air conveyor.
used
Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine
Control CC 100 for ENGEL injection moulding machines
- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request
Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: As Is Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com
Used Used Unscrambler Fava 5.000 bph: Year: 2015 Condition: As Is Used Unscrambler Fava 5.000 bph: Year: 2015 Speed: 5.000 bph Bottle elevator Engines transtecno Dimensions: Length: 4.60 m Width: 1.70 m Height: 2.63 m Weight: 1300 kg Air consumption: 450 nl/min. Safety protections Code: W 61 More details: https://bottlingscout.com
Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: As Is Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com
Used Used PET Blower Uniloy Comec ibm 42: Year: 1990 Condition: As Is Used blower uniloy Comec Year: 1990 Speed: 2200 bph Model: ibm 42 Cavities: 6 Compressor: atlas copco 08 Bottles formats: 3 cl to 500 ml Preform uploader Safety protections Code: W 59 More details: https://bottlingscout.com
Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: As Is Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com
Used Used Kosme blower: Year: 2017 Condition: As Is Model: KSB6R Year: 2017 Speed: 12.000 BPH Rotative with 6 cavities Molds not included Air recovery system Neck finish: PCO 1881 Maximum container size: 3 liters Equipped with hopper, elevator, and orientator Safety protections Code: W 115 More details: https://bottlingscout.com
Used Used Krones blower: Year: 2004 Condition: As Is Model: Contiform S18 Year: 2004 Speed: 24.000 bph for 2,0 L - 28.000 bph for 1,5 L Rotative 18 cavities 1 set of molds included Automatic chiller Automatic preform feeder Automatic preform crate tipper Bottle ejector installed in the pneumatic conveyor Electrical control panel in Polish, English, and German Safety protection Code: W 117 More details: https://bottlingscout.com
Used Used ADS blower: Year: 2000 Condition: As Is Model: 64C02 Year: 2000 Speed: 4000 BPH Linear 4 cavities Molds not included Chiller not included Electrical panel and elevator with ADS included Air recovery system Safety protection Code: W 118 More details: https://bottlingscout.com
Used Used Kosme PET Blower: Year: 2012 Condition: As Is Model: KSB 4R Year: 2012 Speed: 8,000 BPH Type: rotary Number of cavities: 4 Neck finish: PCO 1881 Included molds for 0.5 L and 2 L formats Chiller included Preform tipper, elevator and orienter included Safety protection Code: W 121 More details: https://bottlingscout.com
Used Used Siapi Pet blower: Year: 2009 Condition: As Is Model: EAS 70 115/8 Year: 2009 Speed: 8000 BPH Suitable for 28mm pco 1810, 28mm pco 1881. Linear 8 molds GENERAL DATA Safety Protections Code: W 120 More details: https://bottlingscout.com
Used Used Sipa Pet Blow Molding Machine: Year: 2009 Condition: As Is Model: SFR 8 Year: 2009 Speed: 12,600 bph with 1.5 L (also 0.75 L and 0.5 L) Type: rotary 8 cavities Molds included (4 different: two 0.5 cl, two 0.75 cl) Chiller included Preform elevator included Bottle neck type: 1881 Safety protection Code: W 125 More details: https://bottlingscout.com
various blow molds available from stock. More information on request
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
Head type: BKZ-40 (A 60) Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Nozzle/ Die: 40 mm Hoses/ Parisons: 1 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition
Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition
This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm
HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)
HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
used
Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition
Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12
Single-station machine for articles up to 10 ltr. Extruder 60/20D. Single head, Parison pre-squeeze/cutting device. Waste punch. Immediate available
Manufacturer | manufacturer: Hesta Machine Type | machine type: HM 501 Stations | stations: Single Station | Single station Year of construction | Built: 1993 Location | location: UES Clamping force | Clamping force: 40 kN Control Type | control system: Original Hesta Extruder | Extruder: 50/22D Extrusion Head | Extrusion Head: 2-fold head 100mm | Double head 100mm Mold dimensions mm | mold dimensions mm (A length / length x B Breite / width x C Tief/depth): Bottle Volume Max. | bottle volume max.: 2 L Screen Language | monitor language: German / English | German / English Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks
used double head, with WDS adjustment, in good condition. 125 mm center to center, die dia up to 55 mm.
Key data: 5500
Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones
Key data: 2000
Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base
Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free
Year of construction 1982 for bottles up to 1.5 litres Cylinder has a 50 mm screw, The machine will be sold without blow head Good Condition, still under power!
HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder
HW551, Extruder 55mm HDPE Single Head Up to 300cm3
maximum number of results exceeded
please refine your search
