moulding machine used for sale

This Ferromatik Milacron EE 75 Injection moulding machine was made in 2003 in Germany. It has a clamping force of 750 kN and a screw diameter of 30 mm. The operating hours are at 96694h.

This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.

This SANDRETTO HES 3500 injection moulding machine was built in the year 2010.

This Battenfeld VM 150/525 R1280 Unilog B6P Injection moulding machine was manufactured in the year 2015 in Austria and has 40470 production hours. It is equipped with a BATTENFELD UNILOG B6 control unit.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

This Battenfeld EcoPower180 Injection moulding machine was manufactured in the year 2012 and has less than 500 hours. It is equipped with a Battenfeld Unilog B6 control unit.

This Ferromatik K-TEC 60 S Injection moulding machine was made in 2006 in Germany. It has a clamping force of 600 kN and screw diameters of 18mm (vertical) / 25mm (horizontal). Operation hours are at 75874h.

This Ferromatik Milacron K-TEC 60 S Injection moulding machine was made in 2000 in Germany. It has a clamping force of 600 kN and a screw diamter of 25 mm. The operating hours are at 12968h.

Battenfeld TM-5504500 Injection moulding machine Year 2007 Dimensions of plates and columns : 900 900mm Min. mould dim. / Max. Mould dim. : 400 mm /   720 mm Stroke of Opening : 860mm MOTOR  KW  /   TOTAL  KW 55kw / 75kw

Electric injection moulding machine Manufacturer: JSW Model: 55T AD 60H Year of manufacture: 2010 Screw diameter: 28 mm Screw length: 20D Injection volume: 62 cm3 Injection pressure: 2190 bar

This ARBURG ALLROUNDER CENTEX 470 C 1500-800 Injection moulding machine was manufactured in 2007 in Germany. It has a clamping force of 1500 kN, an opening stroke of 650mm and is equipped with an injection unit with 50mm screw diameter. The plate dimensions are 715x715 mm and light between columns is 470 mm. It is still under power and can be inspected on-site anytime.

This ARBURG 320 S 350-150 Injection moulding machine was manufactured in 2001 in Germany. It has a clamping force of 350 kN and a screw diameter of 30 mm. The min. mold installation height is 172 mm and the platen size is 472 x 472 mm. In total it operated 73384 pump hours. See original tech specs sheet (DE) as PDF attached below.

This ARBURG ALLROUNDER CENTEX 520 C 2000-675 Injection moulding machine was manufactured in 1998 in Germany. It has a clamping force of 2000 kN, an opening stroke of 650 mm and is equipped with an injection unit with 55mm screw diameter. The plate dimensions are 715x715 mm and distance between columns is 900 mm. It is still under power and can be inspected on-site anytime.

This Boy 55 M Injection moulding machine was manufactured in the year 2010 in Germany and has 5532 production hours. It is equipped with a Procan MD control unit. 4 units are available.

Pastry Moulding Machine Janssen FM 128Product DescriptionManufacturer: Janssen &, SohnType: FM 128 / K4 ABounty: 1979Condition: used, functional, baker's conditionWorking width: 250 mmIncl. Forming rollers (s.A.) Mobile baseConnection: 220 / 380 VDedetails see pictures.

This injection moulding machine was manufactured in 2022. With a closing force of 15960 Kn and an opening stroke of 2500mm, the Italtech KS 1600/10800 offers precise control and ample space between columns. Featuring a maximum mould thickness of 1600mm, it accommodates diverse production needs. Equipped with a Sepro robot, it ensures efficient operation. Considering its robust build and extensive production hours of 37,546, the Italtech KS 1600/10800 presents a compelling opportunity. Contact us for further details.

CAP.: 10 000 BTLS/H OF 1.5 L,

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Manufacture | Manufacturer: Bekum Machine type | Machine type: BA15 Station | Stations: Single station | Single station Construction year | Year of construction: 2003 Location | Location: UES Clamping force | Clamping force: 170 kN Control system | Control type: Orig. Bekum Parison Control | WBK: 50 points | 50 points Extruder | Extruder: S 82/20D Parison Head | Hose head: Accu-head AKZ2.3 refurbished 2020 | Battery head AKZ2.3 overhauled in 2020 Mould Dimension | Shape dimensions mm (A length/B width/C depth): 525/400/2150 bottle volume | Bottle volume: 40 L Monitour language | Screen language: English | English Delivery time | Delivery time: Immediately | Right away

Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units

with spare screw, high-pressure hose and various spare parts - see pictures

1 used Strec blower, manufacturer SIDEL, type SBO 14 SERIES 2, built 2004, Siemens S7-400, capacity at 2.0L 16000 Fl/h - at 0.5L 21500 Fl/h,, in principle with shapes 0.5 L + 2.0 L round petaloid, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, Formling mouth 28 / 1810, operating hours 72958, production hours 34191. Maintenance by sidel and own technicians. Condition: neat/good. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Rafael/Compere, some spare parts. No cooling unit, no high-pressure compressor. Last production June 2019. Immediately available.

1 used stretch blower, Manufacturer SIDEL, type SBO 14 SERIES 2, built 2001, Siemens S7-400, power at 0.5L 21500 Fl/h, basically with shapes 0.5 L square/round Champagne bottom, quickly adjustable by GUPM, max bottle size 2.5 L, furnace linear, heating modules 14, forming mouth 30/25. Maintenance by Sidel and own technicians. Condition: Oven chain not complete, but curve card removes new as spare part. With: Sidel Pre-form Hopper/Kipper, various to air transport manufacturer Ling Systems, some spare parts. No cooling unit, no high-pressure compressor. Last production March 2019. Immediately available.

Two-station machine for articles up to 5 ltr. Extruder 90/22D. Single head CoEx (virgin - regrind - virgin). Good condition. Still in production, free approx. June 2020. With waste conveyor below the machine

Control CC 100 for ENGEL injection moulding machines

Krosownice in good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Double station machine for articles up to 6 ltr. Extruder S 70/20D. Double head, 160 mm center distance. Closing force 120 kN. was running 4.000 hours only (lab-machine), very good condition

- Manufacturer: Bekum - Machine type: 506D - Stations/Stations: Double Station /doublestation - Clamping Force: 170 kN - Built: 2003-Retrofit in 2021 by UES - Location/ Location: UES warehouse / UES warehouse - Control type/ Control system: New B&R control by UES/ New B&R Control by UES - WBK / Parison control: 100 points /100 points WBK - Extruder | Extruder: Grooved barrel extruder S 100/24D - Hose head/ Parison head: On request / on request - Shape dimensions mm/ Mold dimensions mm (A length/length x W width/ width x C depth /depth): 550/500/2150 - Bottle volume Max./ Bottle volume max.: 15/ 20 lit. - Screen language / Monitor language: English/ German - Accessories/ Accessories: On request - Weight/Weight (kg): 12000 - Price /Price: On request / on request

- Manufacturer: Bekum - Machine type/ Machine type: BA 34.2 - Stations / Stations: Single Station/ Single Station - Built: 2001 - Location / Location Germany - Control type/ Control system: Original Bekum Beckhoff - Extruder | Extruder: 100/24D - Hose head / Parison head: AKZ4 (New by UES !) - Dimension dimensions mm /mold dimensions mm (A length/ length x W width/ width x C depth/ 700/700/2250 - Bottle volume Max./ Bottle volume max.: 30 lit - Screen language/ Monitor language: German/English - Delivery time | Delivery time: 30 days/ 30 days - Weight/Weight (kg): 13000

Manufacturer Bekum Machine type BM303D Station Double station Construction year 1989 Place Europe Closing force 50 kN Control Siemens Parison Control | WBK 30 Points WBK Extruder 70/20D Shape dimension in mm (Length x width x height) 400/300/ 2100 Parison Head 3BKSV30 Max bottle volume 3 lit Machine weight (kg) 6 t Monitour language German

ENGEL two shot (2k) 2300 ton injection molding machine -Model : DUO 23050H/11050M/2300 COMBI -Manufactured year : 2009

Preform Weight (Max): 30,5 g // Neck Type: PCO

Dimensions of the funnel LxWxH 965x700x340mm.

Plastak HR8 8 stations, for injected leather In working order and with the possibility of seeing it in operation

Year of manufacture: 2011 Screw diameter: 100 mm Weight: 4006 cm3 PS injection weight: 3645 g Closing force: 1300 t

Year of manufacture: 2015 Screw diameter: 55 mm Chamber volume: 665 cm3 Shot weight: 604 g

Year of manufacture: 2004 closing force: 500 t Columnless machine inspection possible video available top condition

DEMAG ET 650/5200 - non-functional broken column Robot - broken year of manufacture: 1997 v. no. 8631032 auger: 95 mm weight: 2835 cm3 closing force: 650 t clamping plates: 1450/1350 between columns: 1000/900

LGH-450M injection molding machine made in Korea. Year of construction 2012 Number of hours worked: 35,000 Clamping force 450 tons. Screw diameter 70 mm. The technical and visual condition is very good. Double-plate closing system

Clamping force: 5500 kN Mold plate dimensions: 920 x 830 mm Screw diameter 80 mm The machine is in very good condition, with full equipment (the entire production cell), ready for production.

OIMA STRATOS 400 KP plastic injection machine Year 2008

Woojin Plaimm 550 Ton injection molding machine year of production 2012 clamping force 550 tons screw diameter 90 mm. double-plate closing system. Technical and visual condition is very good. The machine is used very little.

Krauss Maffei KM90/50-190 CD injection molding machine The machine was working in a CD production line

We offer a Negri Bossi CANBIO V90 injection molding machine for sale.

Capacity 700 tones Distance between columns 8080cantimeter

Demag Extra 1500-600 injection molding machine Clamping force 150 tons Machine in very good condition.

NegriBossi injection molding machine for sale 2008 NegriBossi v320 Injection molding machine

Distance between column : 460 mm x 460 mm Minimum mold clamping 220 mm max 550mm. 125 Ton Machine is in good condition