moulding machine used for sale

SIDEL SBO 14 Universal PET blow-moulding machine for 14 moulds. The manufacturing year is 2006 and the capacity is of 28.000 BPH. The machine is equipped with a quick change or shell moulds. Personalization for preform neck PCO28 1810. Machine equipped with: - Preforms tipper - Preforms hopper - Electrical cabinet - Sidel control panel & PCC - Air conveying system in option The machine is in very good condition which makes it a good opportunity. If you are interested by this machine, contact us for further information and to discuss the availability.

Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option

Key data: 2100 kN, 45 mm

warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12  ...

Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition

This HYUNDAI 450 injection moulding machine was manufactured in 2001. It features a screw diameter of 76 mm, an injection pressure of 1840 ㎏/㎠, and a mould clamping force of 450 tons. The machine has a total power capacity of 88.18 kW and a hydraulic oil reservoir with a capacity of 900 liters. This is an excellent opportunity to acquire the HYUNDAI 450 machine we have for sale. Reach out for more information.

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is all-electric and energy efficient. It has fast, dynamic, and highly precise movements through a five-point toggle lever clamping system with low friction platen guidance on precision linear bearings. The machine is still at the production and can be checked upon request. Full service documentation and manuals.

This ARBURG Allrounder 570 H 2000-1300 HIDRIVE Injection Moulding Machine was manufactured in 2014 in Germany. It has a clamping force of 2000 kN and is equipped with thermoplastic cylinder of 60mm with long barrier screw (open nozzle 60 mm, nozzle tip radius 15, heating tape for open nozzle). In addition it features a servoelectric mold height adjustment with automatic clamping force control, a central clamping platen set Ø 125 mm, a maximum installation dimension increased to 650 mm and injection pressure increased by 10% (max. 2500 bar depending on screw). See overview of full configuration attached as PDF (DE) below. Important remark: The injection unit is leaking, there is a cost estimate from Arburg for approx. 15,000 euros net including assembly. This defect has not yet been rectified as the machine is not currently being used. The sale does not include the housing, any hoppers ...

This used injection moulding machine manufactured in 2001 by DEMAG, model D125-320h/120v, comes with handling features, designed to optimize production efficiency and reliability. A robust example of engineering excellence, this machine stands out for its precise performance and durability. The technical specifications highlight its adaptability to various production requirements, making the DEMAG D125-320h/120v machine we have for sale a valuable asset for any production line seeking quality and consistency. For further details, please contact us.

Engel Injection Moulding Machine e-Cap 3440/420 T. Consider this machine had a new list of 447k in 2013 – see attached. Today new price is around 650k. Working hours is only 18384. Machine from 2012 and still in production Clamp force to/ kN 420/4200 Opening force kN 420 Opening stroke mm 700 Mold height max. mm 750 Mold height min. mm 350 Mould fixing platens h x v mm 1350 x 1350 Tie bar distance hor. x vert. mm 920 x 920 Ejector stroke mm 220 Ejector force forward / return kN 120 mold weight, max on moving platen/center of gravity1 kg/mm 6200 / 315 Dry operation time sec @ imm 2.1 @ 600

This injection moulding machine was manufactured in 1999. The DEMAG D110-310H/120V stands out for its robust design and reliable performance over the years. Known for its efficiency in production environments, this model has been a staple for businesses seeking to enhance their manufacturing capabilities. This DEMAG machine we have for sale represents an opportunity to acquire proven machinery with a track record of success. For further details, please contact us to discuss how this machine can meet your needs.

This ENGEL E Victory 740/160 injection moulding machine was manufactured in 2011, featuring advanced handling capabilities. Noteworthy for its efficiency and reliability, this machine is a staple for producers seeking precision and durability in their manufacturing processes. The ENGEL E Victory 740/160 stands out for its robust construction and ease of maintenance, making it a valuable asset for any production line. Consider the ENGEL E Victory 740/160 machine we have for sale as a strategic addition to your operations. For more details, please contact us to explore this opportunity further.

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

Haitian 700 Ton Plastic injection moulding machine Machine is in good condition

BMB KW 25PI / 1300 injection moulding machine Machine is in good condition All maintenance has been done regularly Robot and tower do not include in the offer

Demag Extra 200-840 Injection moulding machine The Machine is in perfect condition

I have to sell Injection moulding machine Arburg 420M 1996 23500 hours. The machine is great condition with brand new oil 08.2020 Can see to work at anytime.

BOY 22D Injection moulding machine Year manufactured: 1995 The machine is in good condition but is in storage and used only lightly after it was overhauled before I perched it.

Italtech 750 Ton Injection Moulding Machine Machine is in good condition 750 Ton

TSP X1080 Injection Moulding Machine 1080 Ton Machine is in good working condition

Engel Injection Moulding Machine With Robot Machine is in good working condition

Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance

INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar

MACHINE IN GOOD CONDITION NEGRI BOSSI CANBIO Injection moulding machine

This Husky H225 RS 55/50 Injection Moulding Machine was manufactured in the year 2013 in China and has 62435 hours. The machine has a closing force of 2250 kN and a screw diameter of 50 mm.

This HAITIAN JU650II Injection moulding machine was manufactured in the year 2018 in China. The machine has a clamping force of 6500 kN and a screw diameter of 80 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2001 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. It comes with a linear robot ENGEL ERC 23/2-EA (2002). Production hours are at 98167.

This Krauss Maffei PX 121-540 injection moulding machine was made in the year 2017. It is equipped with a Krauss Maffei MC6 control unit. The machine has a clamping force of 1200 kN and screw diameter of 40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with an ARBURG SELOGICA control unit. The machine has a clamping force of 800 kN and a screw diameter of 30-40 mm.

This Arburg 370C-800-250 Injection moulding machine was manufactured in the year 2001 in Germany. It is equipped with an Arburg control unit. The machine has a clamping force of 800 kN.

This ARBURG 470C 1500-675 Injection moulding machine was manufactured in the year 2003 in Germany. The machine has clamping force of 1500 kN, a Opening stroke max. of 500 mm and a Mould height of min 250 mm.

This Battenfeld HM 13000/9200/7700 Injection moulding machine was made in 2004 in Germany and has 67871 hours. The machine has a clamping force of 13000 kN and a screw diameter of 120 mm.

This Krauss Maffei KM 280-1400 C3 injection moulding machine was made in the year 2003 in Germany and has 60000 hours. The machine has a clamping fore of 2800 kN and an injection pressure of 2380 bar.

This KRAUSS MAFFEI 50-180CX Injection moulding machine was manufactured in the year 2013 in Germany. The machine has a clamping force of 500 kN.

This LS MTRON LGH170D-ES Injection moulding machine was manufactured in the year 2017 in China. This machine has a 1706 kgf/cm2 pf pressure. Contact us anytime for further questions.

This Battenfeld HM 10000 Injection moulding machine was manufactured in the year 2005 in Germany. The machine has a clamping force of 10000 kN.

This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN.

This Tederic DE360 Injection moulding machine was manufactured in the year 2018. It is equipped with a TEDERIC KEBA 2880 control unit. The machine has a conveyor belt of 3000 x 600 mm.

This Husky H225 RS 45/38 Injection Moulding Machine was made in the year 2013 in China and has 54744 hours. The machine has a clamping force of 2250 kN and a screw diameter of 38 mm.

This FERROMATIK MILACRON k-tec 40 S Injection moulding machine was manufactured in the year 2004 in Germany. The machine has a clamping force of 400 kN.

This HPM Hemscheid 750-250 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 750 kN and a screw diameter of 36 mm.

This FERROMATIK Milacron K-Tec 85 Injection moulding machine was manufactured in the year 2006. The machine has a clamping force of 850 kN and a screw diameter of 25 mm.

This Battenfeld BA 3500/1900 BK injection moulding machine was built in the year 2000. It is equipped with a Unilog 4000 control unit. The machine has a clamping force of 3500 kN. See video gallery for more impressions.

This Husky H300 RS 55/50 Injection Moulding Machine was built in the year 2013 in China and has 62707 hours. The machine has a closing force of 3000 kN and a screw diameter of 50 mm.

This ENGEL ES 500/110 HL Injection moulding machine was manufactured in the year 2002 in Austria. The machine has a clamping force of 1100 kN and screw diameter 40mm. Production hours are at 94904.

This Netstal SynErgy 1750-460 Injection moulding machine was made in 2001 in Switzerland. It is equipped with a Netstal control unit. The machine has a clamping force of 1750 kN.

This HPM Hemscheid 2500-1400 Injection moulding machine was manufactured in the year 2000. The machine has a clamping force of 2500 kN and a screw diameter of 63 mm.

This SUMITOMO SHI DEMAG Ergotech 350 Concept Injection moulding machine was manufactured in the year 2003 in Germany. The machine has a clamping force of 3500 kN and a screw diameter of 60 mm.

This SUMITOMO SHI DEMAG 1300-8000 injection moulding machine was made in 2010. The machine has a clamping force of 13000 kN and a screw diameter of 110 mm. It Includes a robot MASTER MATTIC RB400CN.

This BMB Ekw 70pi Hybrid Injection moulding machine was manufactured in the year 2015. It is equipped with a HEIDENHAIN control unit. The machine has a clamping force of 7000 kN and a screw diameter of 100 mm.

This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available.