137,967 used machines on RESALE, but how to find them? Machine Search
(1x) large grey gear motor with gearbox, (1x) smaller grey/black gear motor, (1x) compact beige electric motor/gear motor, (1x) blue electric motor/gear motor with flange. Auction-ID: A1-50340-34
Shaft length: 13cm, diameter: 7cm, Equipped with: keyway. Weight: 1035kg Auction-ID: A1-50340-30
Key data: 770 KW, 1500 1/min
a used power generator MWM/DEUTZ 604 with AVK generator price engine euro 6.000,= AVK generator price euro 3.500,= ex stock LEENDE - Ned. Tel 0031 653 160178
Engine is defective ; Probably piston friction ; Auction-ID: A1-51150-100
Multi-axis control architecture Simultaneous control of multiple axes Speed, torque and position control Linear and rotary motion control Return of 1 Vpp SIN/COS incremental encoder EnDat absolute encoder compatibility depending on configuration 2-axis control modules Single-axis and dual-axis power modules depending on configuration Common continuous bus between modules Industrial Communication Interfaces Digital and analog inputs and outputs depending on configuration Connections for encoder returns and motor signals Built-in positioning functions depending on configuration Power and communication wiring included Industrial connectors and terminal blocks included Auction-ID: A1-51172-137
This lot has not been checked for functionality. The seller does not assume any warranty for the condition and functionality of the lot ; Auction-ID: A1-51150-154
3x KU1R132 and 1x K21R132 Used VEM 3-phase electric motors Model: KU1R132/K21R132 Total weight: 232kg (incl pallet) Specifications vary per model, see photos. Auction-ID: A1-50936-27
Used Siemends 1AV3136A and VEM K21R132 SX2TH 3-phase electric motors Total weight: ~105kg Specifications vary per model, see photos. Auction-ID: A1-50936-37
1 SEW-USOCOME helical-conical geared motor type FH47/G DT80N4/BMG/HR Power 0.75 kW Auction-ID: A1-51157-38
6x Mavilor infranor BLT-055 Servomotor Brand: Mavilor Type: BLT-055 Max. RPM: 12000 Auction-ID: A1-50936-272
Maximum power: 6.5 hp Displacement: 196 cm³ Shaft diameter: 19 mm Engine type: Loncin OHV single-cylinder 4-stroke combustion engine Plate dimensions: 500 x 360 mm Centripetal force: 10.5 kN Maximum compaction depth: 20 cm Auction-ID: A7-50799-444
2x 1LA9163 and 1x 1LA7163 Used Siemens 3-phase electric motors Model: 1LA9163 / 1LA7163 Total weight: 252kg (incl pallet) Specifications vary per model, see photos. Auction-ID: A1-50936-26
Lawn mower with 139 cc engine with a nominal power of 2.7 kW. Auction-ID: A7-50799-435
1 x SEW-USOCOME helical geared motor type R47 DT71D4 Power 0.37 kW Output speed 32 rpm Motor speed 1380 rpm Reduction ratio i = 42.87 Auction-ID: A1-51157-37
Equipped with: 149.6 cc 1-cylinder 4-stroke petrol engine, approx. 6.9 kW (9.4 hp), air-cooled, automatic CVT transmission, electric start, front disc brake and rear drum brake, dimensions approx. 1800 × 740 × 790 mm and weight approx. 90 kg. Never used. Auction-ID: A1-47423-1753
Honda VFR1200XD Crosstourer from 2014, a road trail motorcycle equipped with a 1,237 cc petrol engine developing 95 kW (approx. 129 hp) and cardan final drive. Motorcycle particularly well equipped for travel with two GIVI side cases, GIVI E45 top case, Garmin Zumo GPS, large windscreen, handguards and crankcase guards. 55,200 km recorded during the technical inspection of 20/08/2024. Spoked rims, ABS and two-seater seat. Belgian documents present. First registration: 14/07/2014. Euro 3 – 1,237 cc – 95 kW – 2 seats. It presents an interesting package for a Crosstourer, not least thanks to its comprehensive touring equipment. Auction-ID: A3-46101-37235
Equipped with engine: 125 cc, 4-stroke, 11 hp; Fuel: petrol (4-stroke); Transmission: Shift; Brakes: hydraulic disc brakes; Tire size: front 17\" / rear 14\"; Transport dimensions (in box): 135 × 45 × 65 cm; Transport weight: 78kg; Unused in box Auction-ID: A1-47423-1019
Pigaggio X9 500 Do not drive March currently due to dead battery New tyres Helmet case Auction-ID: A3-46101-19509
# Honda CM400T 395cc – 1981 – tight engine – 45,523 km Honda CM400T type NC01, first registered on 09/07/1981, equipped with a twin-cylinder petrol engine of 395 cm³ and a manual gearbox. The odometer shows approximately 45,523 km. Features : - Brand: Honda - Model: CM400T - Type: NC01 - Year: 1981 - VIN / Chassis Number: NC012201676(01) - Displacement: 395 cm³ - Fuel: Gasoline - Transmission: Manual transmission - Color: Red - Power: not specified on the documents presented - Belgian registration The bike has a custom/scrambler configuration, with raised handlebars, alloy wheels, mixed profile tyres, two-seater seat, dual instrumentation and chrome exhaust. The Honda manufacturer's plate is present on the frame. A key is visible on the ignition. The engine is tight and cannot be started. Therefore, no test drive is possible. The motorcycle is sold as a restor ...
Single-axle motorcycle trailer for the safe transport of a motorcycle. Compact and robust model, equipped with a fully galvanized chassis with good corrosion resistance. The trailer has a wooden floor, a central metal rail to guide the motorcycle during loading and a front wheel guard / lock to keep the wheel in position during transport. It is also equipped with several side tie-down points allowing the attachment of straps to secure the motorcycle. Features and equipment: Motorcycle trailer Single axle 2 wheels Galvanized metal frame Wooden floor Center guide rail for motorcycle Front skid plate / wheel lock Tie-down points for straps Reinforced front structure allowing lashing Metal side panels / side guards Mudguards Galvanized straight drawbar Towbar head for ball Jockey wheel Lighting and signage Side reflectors Open construction for easy loading and unload ...
Please note; So put away while walking has been standing still for some time (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47423-2500
Features: - Front disc brake - Headlight - Turn signals / indicators - Side mirrors - Side supports / center stand - Wire wheels - Dual rear shock absorbers - Double round counter unit - Long seat - Rear light - Chrome-plated chain guard Work carried out / overhaul: - Motorcycle overhauled - Various seals replaced - Various bearings replaced - Replacing pistons - Cylinder(s) replaced/overhauled - Replacing valves and valve springs - Chain guard chrome-plated - Rear light adjusted - Turn signals adjusted - Side mirrors renewed/overhauled Included: - Box with various replaced/old parts, including parts from the overhaul work carried out Condition: used classic motorcycle in well-kept condition. Various technical overhaul work has been carried out and parts have been replaced. With signs of wear and age appropriate to the age. Execution and completeness according to photos. Auction-ID: A1-4 ...
Brand/model: Suzumar MX-360/0AL (DS-360) Manufacturer: Sun Selections Co. Ltd (Etz Zone, Weihai, China), imported by B.V. Nimag, Heinenoord, Netherlands Category: C Max. persons: 5 Max. load capacity: 700 kg Max. motor power: 15.0 kW Max. motor weight: 60 kg Working pressure: tube 0.25 bar / keel 0.35 bar Serial Number: CN-SSLZE017L60 (last digit unclear/cut off) CE marking available Outboard Motor Brand: Tohatsu Corporation, Tokyo, Japan Model: MFS6BS 3R4 Year of construction: 2007 Serial Number: 015337XG Power: 4.4 kW (6 hp) Full load speed: 5000–6000 r/min Mass: 24–28 kg Trailer Single axle, with winch in front Auction-ID: A3-46140-11308
BMW S 1000 R, first registered on 30/04/2015, equipped with the 999 cc in-line four-cylinder engine developing 118 kW, or approx. 160 hp. This sporty roadster motorcycle is equipped with a 6-speed manual gearbox and has around 66,100 km on the odometer. The bike features a Black Storm Metallic livery and features an inverted fork, an analogue and digital instrument cluster, ABS-equipped brakes, as well as 120/70 ZR17 tyres at the front and 190/55 ZR17 at the rear. According to the BMW option sheet, it has DTC, DDC, Pro riding modes, Sport package, heated grips and a gear shift assistant, among other things. A Wunderlich-branded smoke bubble, red anodized adjustable levers and axle guards are also visible in the photos. The motorcycle is accompanied by documents including registration certificates, certificate of conformity, BMW owner's manual and vehicle option sheet. Main equipm ...
: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...
Fiat Ducato motorhome equipped with an Elnagh Marlin airframe, put into service on 26/03/1999, with approximately 195,167 km. The vehicle has a complete layout including a kitchen with sink, three-burner stove, refrigerator, storage, convertible dinette, overcab bed and bathroom with toilet and hand shower. It is also equipped with a Fiamma side awning, a rear bike rack and, according to the owner, a solar panel installed on the roof. Around 1,000 km have been covered since major engine work carried out in 2026. A parts invoice dated 04/05/2026, in the amount of €717.01, is available. It mentions in particular the replacement of the cylinder head gasket, the timing kit with water pump, the oil cooler, the glow plugs, the thermostat, the belts and the filters. The engine starts and a video is available. However, the vehicle has not been driven or tested on the road. The gearbox, c ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motorized Transfer Control Handles for Steris C-MAX Tables Enable effortless and safe patient transfer. Compatible with Steris Cmax S, Cmax T, Cmax L and other operating tables Condition: Good, functionally tested Auction-ID: A1-51275-62
Medic Micro 205.00.010 – Foot Control for Surgical Motor Manufacturer: Medic Micro Model: 205.00.010 Condition: Good, Functional Tested Auction-ID: A1-51275-70
Stryker CORE 5400-50 – Shaver and Arthroscopy Motor Console for powering Stryker shavers, cutters, saws and electric drills, with integrated irrigation. Manufacturer: Stryker Model: CORE 5400-50 Simultaneous control of two handpieces, integrated irrigation pump Color touchscreen Condition: for repair or for parts – not tested, sold as is Auction-ID: A1-51275-54
Stryker RemB 6400-099-000 – Universal Surgical Motor Manufacturer: Stryker Model: RemB 6400-099-000 Type: Universal Driver RemB, Pistol Type Handpiece (No Accessories Mentioned) Condition: Good Aesthetic Condition – Untested, Sold As Is Auction-ID: A1-51275-180
De Soutter TDZ-450 Surgical Motor (TraumaDrive) Orthopedic and traumatological surgery of small bones. Manufacturer: De Soutter Medical Model: TDZ-450 Modular Handpiece: Drilling, Boring, Sawing, Spindles Condition: Untested, sold as is Auction-ID: A1-51275-137
Stryker RemB 6400-099-000 – Universal Pistol Grip Motor Manufacturer: Stryker Model: RemB 6400-099-000 Part Number: 6400-099-000 Name: RemB Universal Driver Compatibility: Stryker CORE Console; Drilling, Boring, Pinout and Cutting Accessories Condition: Very good pre-owned condition, functionally tested Auction-ID: A1-51275-46
Stryker RemB 6400-099-000 – Universal Surgical Motor with Accessories Used in orthopedic surgery of small bones (drilling, boring, broaching, sawing). Manufacturer: Stryker Model: RemB 6400-099-000 Type: Universal Driver RemB, Pistol Type Handpiece, with Electrical Cord Included Accessories: Keyless Chuck, K-Wires, Hudson Modified Trinkle, Sagittal Saw, 1/4 & 5/32 Drill Adapters, AO Small Drill Adapter Condition: Refurbished – Good Condition, Functional Tested Auction-ID: A1-51275-161
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 71600 € : 1353.24 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 101400 € : 1916.46 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls a ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 107000 € : 2022.3 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 97700 € : 1846.53 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 112500 € : 2126.25 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software so ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 138100 € : 2610.09 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...
Gitterbox with a capacity of 0.75m3, laying weight approx. 90 kg and loadable up to max 1500 kg With batch of Wacker vibration motors Auction-ID: A1-50663-1480
Engine block put away while running Battery empty due to standstill 72119km Front bend at the connection of the damper rusted through, needs to be repaired Auction-ID: A3-46103-11338
Compound 8 TAPP MOTOR DM45S-30N/15 Tubular motors for dampers. Production 2020 Auction-ID: A7-51362-47
All-in-one meter: It combines the functions of a high-precision densitometer for density control with a spectrophotometer for exact color measurements (e.g. according to Lab or for spot colors such as Pantone). Measurement Geometry & Optics: Uses standardized 45°/0° optics with circular illumination and covers measurement conditions M0, M1, M2 and M3 according to ISO. The spectral sensor captures the visible light exactly in the printed range of 400 to 700 nm. Auction-ID: A1-51285-315
maximum number of results exceeded
please refine your search
100 € 
