motor oil used for sale

3 identical vertical heating oil storage tanks, each with 100,000 ltr. Due to the switch to gas no longer in use By Schallex Apparatebau H. Balogh GmbH Capacity per tank 100,000 l No. 6618/-2D/6601/ 2650/2 Year of manufacture 1992, pressure-resistant up to 2 bar

Denios Oil drip tray with grating 1000 litres / 2.9m x 1.3m x 0.5m - 600€ Denios oil drip tray blue lacquered with grating 1000 litres / 1,10m x 1,30m x 1m - 800€ Denios Oil drip tray with grating 200 litres / 1.20m x 0.8m x 0.35m -250€ Pick-up only

An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.

IHI TURBO OIL FREE COMPRESSOR, WATER COOLED Model : TRA20-235kW Origin : Fully Made in Japan Operating Condition Gas : Compressed Air Capacity : 40m³/min Suction Temperature : 35ºC (Design Point) Relative Humidity : 80% Discharge Pressure : 6barG Compressor Specification No of Stage : Three Output of Driver : 235 kW Voltage : AC415V / 50Hz / 3PH Noise Level : 85dB Starter System : Inverter Starter Cooling Water : Fresh Water Inlet Temperature : 32ºC Water Requirement : 35m³/h Dimensions L x W x H (mm) : 3,700 X 2,000 X 2,000 Weight : 7,100 kg

Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Oil filter, filter cartridge -Ecoair BN: 16013 -Identical: with Atlas-Copco 1202835300 -Dimensions: Ø 140 x 300 mm -Number: 42 pieces available -Price: per piece -Weight: 2 kg

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispensing system -Contents: approx. 60 l -Air pump -Hose with tap -Transport dimensions: 500/500/H950 mm -Weight: 35 kg

Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations regarding sewer discharge. -Dimensions: 750/350/H830 mm -Weight: 10 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with return filter, pressure regulating valve and level indicator -Filter: EPE Eppensteiner type RL601 P= 16 bar -Pressure regulating valve: Bosch 0811 101 177 -Tank capacity: approx. 420 liters -Dimensions: 1870/730/H1070 mm -Weight: 278 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg

Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic reservoir: from Butler 1200 pallet jack -Contents: approx. 11 liters -Additional parts: see photos -Dimensions: Ø 210 x 580 mm -Weight: 11 kg

Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemens 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg

Oil hand pump, oil cabinet, oil dispenser, oil pump, oil dispensing system, oil delivery device, oil station, oil centrifuge -Handover: in its current condition as inspected -Level indicator: missing, condition as shown in photos -Manufacturer: Tecalemit, mobile oil dispensing device with hand pump -Item No.: 1.520201.1 -Tank capacity: approx. 30 liters -Pump: hand-operated -Hose: can be shut off with tap -Dimensions: 500/440/H820 mm -Weight: 17 kg

Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Hydraulic oil tank: with attachments -Tank capacity: approx. 60 liters -Individual components: see photos -Dimensions: 730/670/H620 mm -Weight: 74 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer:BEKO, oil-water separation system Oil and water separation device type Öwamat KT 05 -Accessories: incl. Oekosorb replacement filter, see photos -Dimensions: Ø 680 x 1130 mm -Weight: 73 kg with pallet

Pressure gauge, flow meter, measurement and control technology, liquid flow meter, lubricating oil flow meter -Manufacturer: Turbo, flow meter for lubricating oil -Measuring range: 0 to 1.5 m³/h -Flange: Ø 115 mm / bolt circle Ø 85 x 14 mm -Connection: DN 25 -Dimensions: 160/115/H115mm -Weight: 6 kg

Oiler, line oiler, line oiler, eco line oiler -Oiler: Line oiler for demolition hammers or other pneumatic tools -Number: 3x oilers available -Price per piece -Dimensions: 450/110/H100 mm -Weight: 3.1 kg/piece

Oiler, line oiler, line oiler, eco line oiler -Manufacturer: ASL INC, Line oiler Line oiler for demolition hammers or other pneumatic tools -Dimensions: 350/190/H150mm -Number: 1x oiler available -Weight: 4.2 kg

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator -Manufacturer: BEKO, oil-water separation system, oil and water separation device -Type: Öwamat 2 -Dimensions: 450/370/H760 mm -Weight: 12 kg

Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

Oil seal, shaft seal, radial shaft seal, sealing ring -Manufacturer: Freudenberg, Simmerring Baum / DIN A unused original packaging -Type: BAU7X2 180x210x15 -Art.No.: 40412511 / 1045 3053 72NBR902 BAU7 -Quantity: 4x shaft seals included -Packaging dimensions: 300/300/H30 mm -Weight: 0.3 kg

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Kaeser, Air Oil Separator Filter Type 6 1963 0 -Inside/outside: Ø 124/170 mm -Bolt circle: Ø 210 mm -Number: 3x air filters available -Price: per piece -Dimensions: Ø 250 x 245 mm -Weight: 2.3 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mann Filter, Air Oil Separator Filter Type 49 002 52 101 -Inside/outside: Ø 124/169 mm -Number: 5x air filters available -Price: per piece -Dimensions: Ø 190 x 315 mm -Weight: 2.6 kg/piece

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Ecoair, Air Oil Separator Filter Type N 2785000 / 49 302 52 171 -Inside/outside: Ø 110/170 mm -Bolt circle: Ø 210 mm -Quantity: 1x air filter available -Dimensions: Ø 245 x 420 mm -Weight: 3.4 kg.

DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm -Weight: 4.2 kg

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg

Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm -Weight: 56 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge

Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 750/600/H950 mm -Weight: 80 kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

Oil/water cooling system, KA 340/BWT B57x110, Bühler, used-function assurance Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The pump was used to cool an HFC mixture via the heat exchanger. - Cooling water is fed through the two connections on the left-hand side of the heat exchanger. - We have checked the flow rate of the heat exchanger, it is in very good condition. The system consists of: - Screw pump, Settima GR70-SMT16B-600L-AC-28B5G, Original price approx. € 4,100, Sales price € 1.750. - Motor, 7.5 kW, 400 V, AC Motoren GmbH - Includes SAE rubber compensator from 2 1/2" to 3 1/2", stainless steel - Includes stainless steel SAE 2 1/2" connecting pipe - Plate heat exchange ...

Auction-ID: A7-44871-285

Unused!, temperature range 20-300°C, heater 6,5A-4kW, cooling 20kW Auction-ID: A1-43459-51

210l, No strings attached Auction-ID: A7-45416-12

2x opened barrel; a total of approximately 250 litres; including various plastic oil cans; without pallet; Auction-ID: A1-43992-216

mounted on wheeled bracket; equipped with supply and discharge hose; equipped with various filters; Auction-ID: A1-43992-244

1x plastic container with steel grid floor 1200x1200x220 mm, 2x steel container 2250x1000x250 mm Auction-ID: A1-43992-157