motor guillotine used for sale

1 SUCHY fabric winding and cutting machine, year of manufacture 2015, roller surface width 220 cm, Unwinder with pneumatic expanding shaft for cardboard cores, Inspection station, Cross-cut knife holder (for manual cross-cutting), Rewinder with pneumatic expanding shaft for cardboard cores, Speed: 0–50 m/min

1 KAPPA pinking machine type 51N (Zigzag cutting), knife width 500 mm, power driven swatch and sample cutting machine, serrated knife with 4 mm serration gauge, year 2022, precise and accurate thanks to mechanical movement of the cutting board (turn wheel), exchange of knife is effortless and fast, motor 1,5 kW (2 HP)

1 HOZA (Germany) pinking machine type EZM 60 (Zigzag cutting), knife width 600 mm, electrically actuated, year 2019, laser for cutting line indication, machine controlled per PLC, knife with 4 mm serration gauge, up to 30 cuts per minute, 3 x 380 V, 50 Hz,

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

Guillotine, reel slitter for paper and plastics 25 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T

Guillotine, reel slitters for paper and plastics 30 T, Working width 1.500 mm, Working height 850 mm, Cutting force 1x30 Ton., 7,5 Kw drive 400V 50 Hz., No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, Oil tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 30 T

Guillotine, reel slitters for paper and plastics 25 T, Working width 1.500 mm, Working height 1.250 mm, Cutting force 1x25 Ton., 7,5 Kw drive 400V 50 Hz, No.1 pump 24 l/min, Volume 16 ccm, Speed : up 53 mm/sec, Speed down (80 Bar): 25 mm/sec, OIl tank : 135 lt., With Knife protection, hydraulic locking system, pull rope emergency system, protection grids, complete with control panel, top lodging, space saving for hydraulic pack, Users manuals, drawings, CE compliance, 12 month limited warranty, Possible addition of conveyor belt, reel disposer, spare knife on separate offer., Force: 25 T

Haco TSX 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 8 > 14 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7,5 kW Length: 3880 mm Depth: 1650 mm Height: 1700 mm Weight: 4,5 ton Number of sheet holders: 18x

Offer 25507 Technical data: - Max. working width 2520 mm - Max. material thickness 2.0 mm - Cutting angle 2.2 ° - Stroke rate up to 25 1/min - Back gauge with ELGO positioning control up to 750 mm - Table height 850 mm - Front angle stop 2000 mm - 2 front support arms 1000 mm - pneum. Supported sheet metal hold-up - E-footswitch - Typing - Single stroke pre-selectable - Rear protection grille - Drive 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 2200 mm - Weight approx. 1600 kg

Subj.: Offer about second-hand cut-to-length line Dear Mr Rajput, We have pleasure to provide you with an offer about second-hand cut-to-length line that is immediately for sale. Qty. 1 Second-hand cut-to-length line Mfc.: SACMA, UWM Built: 1994 Material: Stainless steel Strip Width: max. 2000 mm Thickness: 3.0 – 8.0 mm De-coiler Coil weight: 25,000 kg max. Leveller: 13 rolls, dia.: 130 mm Guillotine: start / stop type, manufactured by SACMA, Paper / cellophane feeder Stacker Run-out table Dimensions: 34 x 8 m Speed: 30 m/min

This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine.

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

This FISCHER & RÜCKLE FZR15 / DAR 22 was manufactured in 2009. A used veneering machine, it excels in efficient crossfeed glue splicing of veneer strips. It features a semi-automatic feeding device, a panel automatic for component-matched faces, and a direct stacking device DAR-22 for gentle discharging and stacking. Ideal for high durability and ease of operation. Contact us for more information about this machine.

This FISCHER & RüCKLE FZR15 / DAR 12 was manufactured in 2014. Its a used veneering machine designed for efficient crossfeed glue splicing of veneer strips. Features include a feeding device for semi-automatic feeding, a panel automatic for component-matched faces, and a direct stacking device for gentle discharging. Ideal for applications requiring precise veneer splicing. Contact us for more information about this machine.

Key data: 3200 mm, 2 mm

Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840

LVD MVS 6200 x 6,35 mm Cutting length: 6200 mm Max sheet thickness st 45: 6,35 mm Passage between uprights: 6400 mm Depth of throat: 60 mm Strokes/min: 10 > 465 str/min Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 11 kW Weight: 17,5 ton

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

Code: 0319 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details.

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Key data: 2540 mm, 1 mm

Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005

Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine shears -Guillotine scissors: hand guillotine scissors, solid design -Cutting width: 1030 mm -Max. Section thickness: approx. 2.0 mm -Fence depth: 550 mm, fence with removable rail -Dimension: 2250/870/H1295 mm -Transport dimension: 1670/870/H1110 mm -Weight: 414 kg

guillotine scissors cutting blades, replacement blades for guillotine scissors, replacement blades, cutting blades, scissor blades -Cutting knife. Replacement blades for table shears, 2 pieces -Cutting length: 2550 mm -Hole spacing: 125/200 mm / Ø10 mm see photos -Price/tax: complete -Total weight: 40 kg

Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 € : 3647.7 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0.5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Auction-ID: A1-41275-5

LAFFET 90L32 – Iron Cutting Guillotine General data: Manufacturer: Laffet Model: 90L32 Machine type: Iron cutting guillotine Power supply: 380 V / 50 Hz Motor power: 3 HP Weight: approx. 120 kg Dimensions (L x W x H): approx. 1000 x 400 x 600 mm Condition: Untested Description: Compact iron cutting guillotine designed for cutting metal sections and profiles. Suitable for workshop and light industrial applications, offering reliable cutting performance with simple operation. Auction-ID: A7-45351-44

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-44765-1204

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

Equipped with Sick walk-in protection Auction-ID: A1-45188-126

Size: 550 mm Equipments: Air Table program Photocells defect

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of plate carriers: 8x 500 mm 1x1000mm left stop + ruler Equipped with high-holding device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at widest angle: 6 Working height: 770mm Auction-ID: A1-41991-5

Vintage heavy model Auction-ID: A1-45188-142

Backgauge length: 750 mm (motorized) Control: SP 8 Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of plate carriers: 8x 500 mm 1x1000mm left stop + ruler Equipped with high-holding device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at widest angle: 6 Working height: 770mm Auction-ID: A1-41991-3

Size: 780 mm Equipments: screen monitor(s) Automatic programm Cutting table chromed with air Number of knives: 2