motor guillotine used for sale

Equipped with good tires; new spark plugs; new brake pads; starts well; After the last service it stood still for a while, so check the engine for use with old fuel. Auction-ID: A1-42015-252

Motor scooter in technically perfect condition, last year of production. All papers available From first owner Full maintenance available New tyres Recently had maintenance Auction-ID: A1-41964-36

Type: Scooter Year of production: 2006 Mileage: 14,000 km Engine capacity: 125 cm³ Engine type: 4-stroke petrol Fuel type: Petrol Transmission: Automatic VIN: LPRSE081000404338 Body color: Gray Auction-ID: A7-46319-20

Consists of: large batch of industrial electric motors, gear motors and drive components, batch consists of a mix of renowned brands such as ABB, SEW-Eurodrive, VEM, Motovario, Siemens, Marathon Electric, Nord, Elektrim, Elsto and Dutch Motors, varied set of standard IEC electric motors, flanged motors, geared motors and some units with brake and/or gearbox, frequency converter (Siemens Combimaster), various mounting versions (base, flange B3/B5/B14), 3-phase asynchronous electric motors, gear motors (with gearbox), brake motors, range: approx. 0.37 kW to 7.5 kW, common powers: 0.37 kW, 0.55 kW, 0.75 kW, 0.9 kW, 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, up to approx. 7.5 KW, featured examples (of ABB motors (several pieces), power: 0.37 – 0.9 k, Motovario motor (with brake), power: 0.75 – 0.9 kW, SEW-Eurodrive gear motor, power: ± 1.5 kW, torque: ± 129 Nm, with gearbox, VEM motor, power: appro ...

Batch of electronics modules and cards Condition: unused Auction-ID: A1-46070-1

SEW-EURODRIVE - R37 DT80K4BMG - electric motor 1x Condition: Used Auction-ID: A1-46070-283

Beckhoff - AM8113-0F20-0000 - Servo motors 24x Auction-ID: A1-46070-167

Beckhoff - AM8131-0F20-0000/PLE - Batch Servo Motors 25x Auction-ID: A1-46070-27

Classic motorized bicycle equipped with Motori Minarelli \"Mosquito\" 48cc engine. Vintage vehicle intended for restoration or collection. It is sold in the condition it is in, without a functional check. The Minarelli Mosquito engine is a model recognized in the classic moped sector, which adds additional value to the whole. Status: - Used - Unverified operation - Possible signs of wear and use Note: On-site inspection is recommended. The lot includes only what is visible in the photographs. Keywords: motorized bicycle, bicycle with motor, classic moped, classic motorcycle, classic vehicle, Minarelli engine, Minarelli Mosquito motori, Mosquito 48cc, antique moped, vintage bicycle, collector's vehicle, restoration project, classic motorcycle restoration, antique vehicle, antique motorcycle, vintage moped, classic bicycle restoration, bicycle auxiliary engine, histo ...

Auction-ID: A1-45170-92

Batch of parts mix (including Siemens SIMOTICS/SIMATIC) Weight: 126KG net Auction-ID: A1-46070-330

Batch of stepper motors - min 75x Auction-ID: A1-46070-199

Brand: W.O.S.; Type: Vacuum set complete; Engine: Hatz diesel engine; Start: Electric and manual start; Vacuum pump: Busch R5; Application: Vacuum lifting system for pipes and heavy elements; Composition: Vacuum unit with suction cup(s); Tested and working; 212 operating hours Auction-ID: A1-45170-2

Rexroth IndraDrive Mi servo motor - KSM01.2B-041C (4x) R911320782 Auction-ID: A1-46070-44

Batch of drive units/motors Weight: 128KG net Auction-ID: A1-46070-165

\" Werth CNC coordinate measuring machine OPTIMUS 300 (3-axis motorized) Werth OPTIMUS 300 optical CNC coordinate measuring machine with motorized axes X, Y and Z. Year of construction 2010. System with video image processing for optical contour recognition and motorized positioning. Version with control panel, PC system, monitor and installed measurement software. Test report dated 15.10.2024 is available. Device ready for operation from measurement room environment. • Manufacturer: Werth Messtechnik GmbH • Type: OPTIMUS 300 • Version: BAS. INSTR. 300 Z-MOT • Year: 2010 • Serial number: 10-00454 • Axes: X / Y / Z motorized • Measuring range X: 0 – 400 mm • Measuring range Y: 0 – 200 mm • Measuring range Z: motorized (working focus) • MPEE: 2.5 μm + L/40 • Sensor system: Werth probe ZTMC-2/2 V4.10 • Measurement software: Version 7.31.083 • MC control: 7.2 ...

Teikoku Canned Motor Pump BA61 Manufacturer: Teikoku Electric Mfg. Co., Ltd. (Japan) Sales: AxFlow AB, Stockholm, Sweden Model / Type: BA61-116J4BL-050611V-F Serial Number: FC-1236A-2 Date of manufacture: July 2010 Performance data: Lifting height: 50 m Flow rate: 18 m³/h Frequency: 50 Hz Voltage: 400 V Power: 11 kW Current: 23 A Number of poles: 2 Degree of protection: IP65 (IEC 60529) Operating mode: S1 (continuous operation) Ambient temperature range: −15 °C to +40 °C Location: Kusel

electric motor, three-phase motor -Manufacturer: ATB Nordenham, explosion-proof electric motor -Type: CD 90L2-8 -Power: 0.55 kW -Speed: 690 rpm -Shaft: Ø 14 x 30 mm -Design: B14 -Protection class: IP55 -Terminal box: EAR 80 -Number: 2x motors available -Price: per piece -Dimensions: 345/176/H270 mm -Weight: 32.1 kg/pc.

various designs, in stock in open-fronted storage bins, incl. accessories, total dimensions approx. 500x310x200 mm Auction-ID: A1-45790-481

In stock on pallet, total dimensions approx. 1200x800x720 mm Auction-ID: A1-45790-596

In stock on pallet, total dimensions approx. 1200x800x880 mm Auction-ID: A1-45790-569

In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-573

In stock on pallet, total dimensions approx. 1200x800x700 mm Auction-ID: A1-45790-571

Pump Manufacturer: Dynamic Pumps Pump Type: FTB 200-150-315 Engine manufacturer: KSB Motor power: 30 kW Speed: approx. 1470 rpm at 50 Hz Flow rate: approx. 300 m³/h Lifting height: approx. 21 m Voltage: 400 V Triangle / 690 V Star at 50 Hz Degree of protection: IP55 200 mm suction connection 150 mm pressure port 315 mm impeller diameter Single Stage Centrifugal Pump axial entry (front) radial exit (top)

\"Motorola and Geonaute walkie-talkies, 11 pieces Set of 11 radio transceivers with necessary charging accessories + carrying cases. They are tested and functional. Everything is sold as a package.\" Auction-ID: A7-46488-7

Parts package new Tesla Y Dual Motor, year 2022 without frame, papers and COC You will receive a Tesla Y in parts, except for the frame and carpets/plastic panels. The parts are loaded onto 6 pallets by forklift (about 4 loading meters in the truck). In the photos you can see a complete Tesla Y as an example and partly photos of duplicate parts. You will receive a black Tesla as a parts package without frame, papers and COC and carpets/plasti trim. Transport and export worldwide can be arranged on request Equipment: Black body parts LED Headlights large battery 78.4kwH Control units, display 21 inch alloy wheels Full leather black Radiator Cladding Auction-ID: A1-45451-10008

Equipped with 110cc engine Manual clutch; Kickstart Wheel/Rim: V: 90/100-14 (14\") A: 70/100-17 (17\") Hydraulic disc brake Oil shock absorber Single steel exhaust pipe Maximum speed: 70 km/h Unused in box Transport packaging: 1295 x 375 x 620 mm comes in box, unused Auction-ID: A1-40418-505

- Year of construction 2022 - 1389 operating hours - FPT 4 cylinder, 3.2L, 83hp engine - Caprari MEC-MG80/4/3A pump - Elcos CIM-137/4GW motor-pump protection with GSM function - Electric acceleration and deceleration - Water tank pump suction system with electric valve - Venturi pump suction system - Stainless steel storage box - 10.0/75-15.3 tires Auction-ID: A1-40137-127

Unaudited Auction-ID: A7-46327-203

Band saw FB 710 CE version 3x400V 50 Hz 5.5hp (4 kW) S6/40% X-Life II Band Saw Guide Ceramic Inserts Table can be swivelled -5° to 45°, aluminium stop at the table, height adjustment of the upper Guide with handwheel, automatic blade tension control, automatic e-brake, Cutting height 460 mm, cutting width 690 mm, saw blade length from 5110 mm to 5140 mm, Recommended saw blade length: 5120 mm Auction-ID: A1-46501-2037

Provided: 2 pieces. 1 short tail 40hp 2 stroke (complete and working) with remote control, 1 long tail 4stroke EFI (not complete, but with 3 pinion pieces and loose parts) operation not known year of manufacture 2006) Auction-ID: A1-42016-93

- Year of construction 2024 - 1199 operating hours - FPT 4 cylinder, 3.2L, 83hp engine - Rovatti F33K100H/3E pump - Elcos CIM-137/4GW motor-pump protection with GSM function - Electric acceleration and deceleration - Water tank pump suction system with electric valve - Venturi pump suction system - Stainless steel storage box - 10.0/75-15.3 tires Auction-ID: A1-40137-129

Equipped with: Tail lengths long 51 cm, upon collection the buyer gets the printout of real hours of 25 hours. four stroke, Electronic Fuel Injection, powertrim. Auction-ID: A1-42016-91

Equipped with: With remote control, with power trim, Smartcraft (readable hours around 450 hours) on delivery, the buyer will receive a printout with these hours. Long tail 51cm. 40 hp four-stroke outboard engine with EFI injection, long tail (20\"), electric start/trim, approx. 102 kg and max. 6000 rpm. Auction-ID: A1-42016-92

Equipped with 110cc engine Manual clutch; Kickstart Wheel/Rim: V: 90/100-14 (14\") A: 70/100-17 (17\") Hydraulic disc brake Oil shock absorber Single steel exhaust pipe Maximum speed: 70 km/h Unused in box Transport packaging: 1295 x 375 x 620 mm comes in box, unused Auction-ID: A1-40418-463

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

The mileage and other data given are to be understood as non-binding guideline values. No guarantee is given for the correctness of the information ; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for road and operational safety; Battery dead; Auction-ID: A1-46596-1137

Max. bending length: 2040 mm, Sheet thickness: steel 2.5 mm, Alu 4mm, Stainless steel 1.5mm, with backgauge and foot pedal Auction-ID: A7-46619-260

Pallet with various accessories - 3x motors Vise Auction-ID: A1-46607-115

Technical details Type: Belt conveyor Configuration: Horizontal transport conveyor Drive: Electric motor with worm gearbox (marked VF 72”) Power: Estimated 0.37–1.1 kW Operation: Fixed speed (no inverter visible) Control: Basic electrical control box (on/off) Structure: Steel frame mounted on wheels Belt: Rubber/slat conveyor belt Application: Transport of metal parts, components, or bulk items between machines Equipment - Geared motor unit - Worm gearbox (VF 72 type) - Conveyor belt system - Mobile steel frame - Electrical control box Dimensions and weight (approx.) Length: 3000 mm Width: 600 mm Height: 900 mm Weight: 200 kg Auction-ID: A7-46498-87

Technical details Type: Industrial electric motors and components (mixed lot) Configuration: Assorted motors and drive components in transport cage Quantity: Approx. 6–8 electric motors Motor types: Asynchronous AC motors (various sizes) Power range: Estimated 0.5 kW – 7.5 kW Mounting: Mixed (foot-mounted and flange-mounted) Design features: - Cooling fin housings - Shaft outputs (various diameters) - Electrical terminal boxes Additional components: - Possible gear motor units - Pump or blower motor assemblies - Loose wiring, connectors, and accessories Application: Industrial drives for pumps, conveyors, fans, and general machinery Condition: Used, dusty, partially oxidized; untested; some units incomplete or with open terminals Dimensions and weight (approx.) Length: 1200 mm Width: 800 mm Height: 900 mm Weight: 300 kg Auction-ID: A7-46498-160

Technical details Manufacturer: KSB (Germany) Model: ARX F080-230 Type: Vertical single-stage submersible motor pump Year: 2024 Power: Approx. 5.5 kW Voltage: 400 V / 50 Hz Speed: Approx. 2900 rpm Protection: IP68 Insulation class: F Max fluid temperature: 40°C Configuration: Submersible design with integrated motor housing Connection: Flanged outlet Duty: Continuous industrial operation Application: Drainage, wastewater handling, process fluids Equipment - Integrated electric motor - Flanged discharge connection - Power cable - Mounting base / flange kit - Steel lifting cable (approx. 10 m) Dimensions and weight (approx.) Length: 800 mm Width: 300 mm Height: 350 mm Weight: 130 kg Auction-ID: A7-46498-99

VISCO JET MOTOR WITH PUMP  SSG FIMETT, ADLF 5X18 MULTISTAGE PUMP C/W 4KW MOTOR,4POLES AND 50HZ PLEASE CONTACT FATIMAH (+60136287197) MALAYSIA NUMBER LOCATED AT F25

42 lattice boxes with spare parts for two-wheelers, motorcycles and e-bikes with a total net retail price of approx. 65,000 €. The lattice boxes are also part of the auction! The spare parts are originally for two-wheelers of the Sachs/SFM brand, but some are also suitable for other common brands. Some high-quality engines enclosed and much more. You can find a list in the pictures. Loading free truck Auction-ID: A7-46494-1

Manufacturer: HARDINGE Year: 2005 Type: CNC Motorized Tool Lathe with C-Axis Numerical Control: FANUC 21i-TB Bar Capacity: Ø 51 mm Max. Turning Circle: Ø 310 mm Max. Turning Length: 470 mm Chuck: Ø 200 mm (8\") Bed Inclination: 45° Spindle: 50–5,000 rpm – 18.5 kW (max) / 11 kW (continuous) Turret: 12 stations, all motorable positions Motorized implements: 4,000–5,000 rpm – 3.7 kW Fast feeds: X/Z 19 / 24 m/min Accuracy: ±0.005 mm Included equipment: Programmable C-axis (0.001°), IEMCA Boss 545 bar feeder Weight (kg): approx. 4200 Auction-ID: A1-46647-272

Manufacturer: DMG GILDEMEISTER Year: 2008 Type: CNC lathe with motorized tools with C and Y axes Numerical control: Heidenhain iT Plus Max. turning diameter: 400 mm Max. turning length: 600 mm Distance between tips: 615 mm Main spindle: 20–6,000 rpm – 16 kW – max. torque 155 Nm Bar capacity: Ø 52 mm – spindle bore 61 mm C-axis: 0.001° resolution Turret: 12 positions – 12 motorized tools (5,000 rpm, 3.7 kW) Strokes: X 160 mm / Z 450 mm / Y ±32 mm Fast feeds: X 60 m/min – Z 45 m/min Attachments: Chip conveyor, 12 bar HP coolant, workpiece catcher, fixed tool holders (5), motorized tool holders (3), hydraulic system Dimensions (mm): 8000 × 3000 × 2700 Weight (kg): approx. 4500 Remarks: Machine in good condition, powered on. Serial number included in the description. Auction-ID: A1-46647-212

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-46647-236

Power: 2 x Volvo Penta D4-225; total ~450 hp (330 kW); diesel; sterndrive Operating parameters: Engine hours ~300 h; length 9.21 m; beam 3.56 m; class 10 m cabin cruiser Workpiece capacity: Up to 6 berths; cockpit + cabin layout (forward berth + mid cabin) Supported edges: Coastal & leisure navigation Edge types: Recreational cruising; sport navigation Included equipment: Raymarine navigation; GPS + autopilot; bow thruster; electric anchor windlass (remote); hydraulic gangway (pasarela); hardtop extension; cockpit table + convertible sunbed; 2 refrigerators; interior galley w/ gas hob; hot water boiler; shore power 220 V; solar charger; swim platform + ladder Compliance: CE pleasure craft (typ.); EU registration N/C Power supply: Diesel engines + 220 V shore power Year/Manufacturer: 2008 / Cranchi (IT) – Zaffiro 32 Sport cruiser 9.2 m with twin Volvo Penta engin ...

Very high-quality BMW R 75/5 motorcycle sidecar in classic black paint with white trim lines. The vehicle was fully restored between 2010 and 2012 and has only driven about 680 km since then. The restoration and conversion costs were over 26,000 € without the motorcycle. The vehicle comes with a complete Leitz folder with extensive documentation. The sidecar was built in 2012 as a new part, regularly accepted and registered. Visually, the combination presents itself in a very neat condition with a clean paintwork, neat chrome, wire wheels, classic boxer technology and a harmonious overall look. Equipment: · Registered sidecar · Sidecar with disc brake · Wire rims · Large lockable trunk in the sidecar · Comfortable sidecar seat with good legroom · Full restoration 2010–2012 · Extensive documentation folder · Classic BMW 2-cylinder boxer engine · Shaft drive · Black paint wi ...