motor guillotine used for sale

Key data: 1530 mm, 4 mm

Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg

Size: 610 mm Technical details: Power: 380 V 50 Hz 2.2 KW Equipments: Cutting speed: 3.1 sec / cycle or 19 rpm width: max. 610 mm Cutting length: max. 610 mm Job memory: 256 Cutting height max. 100 mm

Hydraulic shear (guillotine) Brand: Gester, Model TN-30, cutting chamber: 770x650 mm, motor: 4 KW (5.5 hp).

Haco TS 3100 x 12 mm Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4240 mm Depth: 1900 mm Height: 2100 mm Weight: 10 ton

Key data: 2050 mm, 3 mm

Machine Type: Guillotine Shears Manufacturer: SCHARRINGHAUSEN Model No.: HS-III Year of construction: 1964 Condition: good Offer Type: Used Machine Specifications: Capacity: 2050 x 3.0 mm Drive type: el./mech. Propulsion: 5.5 kW Remark: backgauge, El. foot release, front stop rail, Machine feet Weight: 2700 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

D and D Stainless cutter Stainless guillotine, mounted on conveyor, previously used for cutting cakes and honeycomb, conveyor dimensions 2200mm x 640mm, adjustable dwell and cutting time, variable speed, 3Ph

Specifications: - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle hydr. adjustable 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 17 pcs - Motor backgauge 15 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 17 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 900 mm - Space requirements incl. back gauge, without front support arms -ca. W 4040 x H 2230 x D 2230 mm - Weight approx. 10500 kg -with: - E-foot switch - Cutting line illumination - - Cutting length preselection via potentiometer - Rear area protection with grille

Machine Type: Guillotine Shears Manufacturer: RAS Model: 54.30 Year of construction: 1975 Condition: very good Offer Type: Used Machine Specifications: Capacity: 1040 x 4.0 mm Drive type: el./mech. Propulsion: 7.3 kW Remark: rip fence, Material supports and stop at the front, 2 spare blades Weight: 2000 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Hydr. Swing cut guillotine shears HERA type HSS III Fabr. No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Column projection 200 mm Knife strokes 25 strokes/min. Mains connection 380 volts, 50 Hz motor power 3 kW - motorized adjustable back gauge 1070 mm - actual value digital display for the back gauge - cutting gap adjustment - cutting length adjustment - front side gauge left 1000 mm - 4 sheet metal support arms 1000 mm - el. Foot switch Space requirement without sheet metal support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition; used

Key data: 1040 mm, 4 mm

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions The rear area is secured by a safety fence with light barriers Knife sharpened Instruction manual available Weight: 1600 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27200 € : 552.16 € : 2050 mm : 4 mm : 42 1/min : 750 mm : 7.5 kW : 800 mm : 450 mm : 2700 mm : 2300 mm : 1350 mm : 2800 kg motorizedback gauge atrecirculating ballscrew with Control DT5 hold down with rubber pads Side Lay with T-Slot 2 Sheet support arms ball in the table tape measure tilting stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: working length: 2500 mm max. thickness of cutting material: 10 ,mm S235, S355 manual limiter adjustment machine is mechanical with a flywheel hydraulic sheet metal presses plate thickness: 10 mm, weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,050 x 2,050 mm

Code: 0022 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

Description: Plate shears - mechanical - technical details, plate width 2000 mm, plate thickness 3 mm, distance between columns 2080 mm, total power requirement 5 kW, machine weight approx. 2.5 t weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,850 x 1,450 x 1,410 mm

Key data: 2500 mm, 1 mm

Max. cutting length: 2500 mm Max. sheet thickness: 1.75 mm steel Manual backgauge up to 500 mm Side stop and table extension Knife sharpened

Cutting length : 4100mm, Max. sheet thickness 10mm,

Blade sharpener Brand: Gester, model: Reham-15, engine: 2.2 KW (3 hp), size: 1.5 m. Automatic scrolling and lowering. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Description: Serial number: 2044 Cutting length: 3050 mm Max. Cutting capacity: 6 mm Cutting angle: 1.5°/1° Stroke/min: 21 - 31 1/min Max. Length of backgauge: 5 - 1000 mm With technical documentation as shown in the pictures With mobile sheet support Support surface: approx. 2500 x 1240 mm For further technical data see pictures With spare blade plate width: 3,050 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,400 x 2,700 x 1,750 mm

LVD HSL 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Backgauge: 750 mm Adjustable cuttingedge: 0.5 > 3 mm Electric motor (power): 7,5 kW Length: 3500 mm Depth: 2200 mm Height: 2250 mm Weight: 5 ton

Guillotine Magurite Type: Fromat 053 Efficiency: 4 000 kg/h Block size: 500 x 600 x 300 mm Operating temperature: to -18°C Engine power: 5.5 kW External dimensions: 2500 x 1150 x 1800 mm Entirely made of stainless steel Weight: 760 kg Power: 400V 50Hz 3N Magazine status: 1 piece Condition: used, ready to work

Working width: 2040 mm Sheet thickness: approx. 1 mm Back gauge: 600 mm Dimensions: 2400 x 1070 x 1100 mm Weight: approx. 900 kg

Working width: 2040 mm Sheet thickness: approx. 1 mm Back gauge: 600 mm Dimensions: 2400 x 1070 x 1100 mm Weight: approx. 900 kg

Lakidis frozen block cutter, model: Guillotine, type: GN-400, serial number: 590120, 2.2 kW, capacity: 900-1500 kg/hour, working width: 400 mm, distance between knives: 100 mm, total dimensions: 2250 mm x 900 mm x 1720 mm.

Description: including base frame , max. cutting length approx. 180 mm Approx. Onsite Dimension. (l x w x h): 670 x 670 x 1,860 mm, weight approx.: 200 kg

Description: cutting capacity 5 to 7 mm including base frame Approx. Onsite Dimension. (l x w x h): 1,300 x 350 x 1,900 mm, weight approx.: 200 kg

Description: Sheet width 4100 mm Sheet thickness 6 mm Stand width mm DARLEY control Cutting angle 1°20' ° Oil volume 150 litres Description: Cutting length adjustment, foot switch, 3 support arms (left one with scale), motorised backgauge, finger guard, 21 hold-down devices, sheet chute, manual cutting gap adjustment, sheet holding device plate thickness: 6 mm, cutting angle adjustment: 1 °, total power requirement: 18,5 kW, weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x 2,300 x 2,000 mm

Description: Serial Number: 8809/173/A632 Machine for cutting large sheets and all types of materials, mainly iron and stainless steel. Possibility of programming the size of the cut Two tables to support the pieces Tray for cut pieces and light Cutting Lenght: 2000 mm Max. thickness of cut: 4.5mm Dimension control by pulse generators Electric brake , Memory capacity: 255 programmes on a single line 2 programmes of 100 lines , 1 program of 56 lines Auxiliary function: 'M' 0-9 Auxiliary function 'G '0-9 Installed power: 20 W , weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,700 x 1,500 mm

Description: Control system : Siemens Simatic Panel Series 9187 Pressure 260 bar , Stroke 12 / min , plate width: 4,100 mm, plate thickness: 6 mm, cutting angle adjustment: 0,05-1,95 °, rare limit stop: nein mm, column arm: 400 mm, total power requirement: 11 kW, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 13,500 x 2,400 x 2,400 mm

Description: maximum capacity 1555 KN serial number 2608 Control: Elgo 85 number of pressure stamps: 21 SICK safety curtain plate width: 4,000 mm, plate thickness: 20 mm, cutting angle adjustment: 3.5 °, rare limit stop: 1,500 mm, column arm: 400 mm, total power requirement: 33 kW, weight approx.: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,700 x 2,900 mm

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Size: 1020 mm Equipments: with PC control Unico used shee cutter Machine speed max 220m / min with register control Calender width 1020 mm Type: Micromatic paper weight : max. 65-120 gram PC and cutting edge control were replace in 2012 cutting accuracy: +/- 0,3 mm Embossing unit year 2005

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

DC shunt motor, main spindle motor, servo motor, DC motor, DC motor SIEMENS type 1GG5134-0WH46-6HU7-Z Rated power: 22.5 kW Operating voltage: 38 to 380 volts DC Rated current: 67 A Speed: 50 - 2160 / 4050/5000 rpm Shaft diameter: mm Shaft spigot length: mm Wedge groove width in the shaft: mm- foot motor with 4 mounting holes - with mounted forced fan Overall dimensions L x W x H: approx. 700 x 580 x 350 mm Net weight: approx. 250 kg The drive motor is still ready for operation in a Gildemeister GDM42. You can find the right drive controller under stock number 60343 Further components from Gildemeister can be found under stock number: 60343 , 60346, 60348; used

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, gear motor servo motor -Gearbox: Type KHF47 / A 11 rpm i 131.87 -Motor: Type CMP71S / PK / RH1M / SM1 -Speed: 0 - 2000 rpm -Construction: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205 / H210 mm -Weight: 33 kg

Three-phase motor, electric motor, lifting motor -Manufacturer: Balkancar podem, lifting motor up to 3200 kg load -Type: KG 2011-6 -Power: 4.5 kW -Speed: 920 rpm -Shaft: Ø 30 x 85 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 475/345/H355 mm -Weight: 66 kg

1FT5072-0AC71-1-Z

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Three-phase motor, electric motor -Manufacturer: Volta, electric motor from guillotine shears Stankoimport 3218 -Type: AOC2-52-6 - C1 -Power: 9 kW -Speed: 890 rpm -Shaft: Ø 38 x 80 mm -Construction: B3 -Dimensions: 570/370 / H315 mm -Weight: 112 kg

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

2 Motor driven conveying systems (Vibration) - 1400 mm x 1000 mm each. Each unit is driven by 2 motors

We offer complete recondioned Scania engines in exchange

ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg

SEW-motors with gearbox v. 1, 5kW - 15kW.Die engines have been used mint condition and never.Visits by appointment at any time.

3 Phase brushless servomotor Never used! For all technical data please see pictures