motor guillotine used for sale

Equipments: Program photo cells Hydraulik press

LVD MVS 6200 x 4 mm Cuttinglength: 6200 mm Max sheetthickness st 45: 4 mm Depht of throat: 60 mm Strokes/min: 16 > 50 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 1,5° Electric motor (power): 7,5 kW Length: 6400 mm Depht: 2300 mm Height: 2100 mm Weight: 14 ton

Size: 1370 mm Equipments: program control air table right and left side photo cells vibrating table RA-5

Size: 1150 mm Equipments: 3 spare knifes air table

Specifications: - working width 3100 mm - max. cutting capacity St 40 8 mm - Engine backgauge 10 - 750 mm - front angle stop - Stroke rate up to 30 per min - Drive 400 V / 2 x 6.5 kW - Space requirement incl. backgauge, without front support arms - approx. W 4250 x H 1500 x D 2450 mm - Weight approx. 11000 kg

Gilotine Ruhle Type: GFR 450 Efficiency: 3 000 kg/h Block size: 450 x 250 mm Operating temperature: to -20°C Engine power: 5.5 kW External dimensions: 1500 x 700 x 1400 mm Entirely made of stainless steel Weight: 350 kg Power: 400V 50Hz 3N Magazine status: 1 piece Condition: used, ready to work

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

sheet width: 1550 mm plate thickness: 3 mm distance between columns: 1600 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 2,06 x 2,14 x 1,21 m Demonstration machine with small paint damage. The machine works quietly and is powered by its geared motor Braking system energy-saving. Our machine is welded as a monobloc body from ST42 quality material. The knives of the machine are of 2379 quality and the brand name is BOHLER. These high-quality knives guarantee precise cutting. Emergency stop button, foot switch and finger guard are included standard equipment. (Documentation in English only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

Guillotine shears Manufacturer Kramer Type TM II a 4000 Year of construction 1988 2.5 mmm sheet thickness. Machine is in a used very good condition. With invoice and VAT.

sheet width: 3000 mm plate thickness: 3 mm distance between columns: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic guillotine shears STEINER type HTS 30/20 R Masch. No. 315 Year of construction 1982 Cutting length 3050 mm Cutting thickness 20 mm Backgauge 800 mm controlled Motor power approx. 30 kW Mains connection 400 Volt, 50 Hz - Backgauge with positioning control ELGO - Backgauge adjustment via ball screws - Safety light barrier SICK front as intervention protection - 3 pieces of material support arms with ball castors - electric foot switch - spare knife Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space required for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.; used

Oscillating shears KÖLLSCHEN type BSK 2000/2 Fabr. No. 69 1307 Year of construction 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Engine power 4 kW - Drive via gear motor with brake and crankshaft - Mechanical sheet metal hold-down - manual backgauge 500 mm - Stop adjustment via 2 handwheels, rear on the backgauge guide with dimension cala - front side stop left 720 mm- electric foot switch - manual central lubrication - control cabinet on the machine- machine stands on 4 pieces oscillating elements, approx. 100 mm height space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition; used

Sheet thickness: 7,00 mm Sheet width: 3150 mm Depth rear gauge: 1000 mm Guillotine with ELGO Length measuring device front Sheet support holding system backside Throat 500 mm Maximum sheet thickness:    7mm Max. cutting length:        3150mm Strokes on full length:     22mm Strokes in short 1000 length:45 Cutting angle:              0,30 - 3 Gr° Length backgauge:           1000mm Number of down holders:     21 Power:                      11kW Length:                     3800mm Width:                      2200mm Height:                  &nbs ...

Hydraulic guillotine shear Make: JWELL, engine: 5.5 Kw (7.5 hp), year 2020. For sheet metal cutting. Blade width: 2.2 m.

Working length:1040 mm Sheet thickness: 4 mm Cutting angle: 1.6° Backgauge: 10 - 750 mm Number of hold-downs: 1 (13000N) Side stop: 70 - 850 mm Travel speed: 90 mm/s Projection (WxH): 20 x 125 mm Weight, ca.:1600 kg Dimensions (WxDxH), approx.: 1850 x 1870 (3120) x 1550 mm Equipment: - Motorized backgauge - Foot control - Emergency stop impact button -Operating instructions - Table widening

CNC controlled backgague CNC knife play adjustment CNC cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3600 mm Depth: 2050 mm Height: 1950 mm Weight: 6,3 ton Number of sheet holders: 16x

digital readout for backgauge Cutting length: 3100 x 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,5° - 2° Electric motor (power): 11 kW Length: 3574 mm Depth: 1550 mm Height: 1620 mm Weight: 6 ton

Equipments: Machine dimensions: W: 850 mm, D: 560 mm, H: 780 - 950 mm Tape dimensions: 5-13 mm Belt tension: 8-45 kg/80-450N Belt tension infinitely variable

Fully equipped line with: Lift, Jogger and Stacker.

with Jogger. -/- STANDARD-EQUIPPED

Lift, Jogger with air-roller, Stacker.

Airtable chromed, 2 side-tables resopal, Baumann NUP-1000 lift, Baumann BASA-3 jogger, Baumann APS-3 Behind-load BFS-3-R, Baumann-Stacker BA-3

Hydraulic guillotine shears WEIKA 3200x10mm Year of construction 2023, NEW MACHINE Cutting length 3200mm cutting thickness / steel 10mm cutting thickness / stainless steel 5mm cutting thickness/ aluminium 10-12mm Electrical backgauge Light barrier Front support with ball castors Drive power: 11KW Cl3zr3h0wi Dimensions: LxWxH approx. 3.9x2x1.95 metres Weight 8000Kg

We sell on behalf a guillotine shears this was fully functional until the site closed. Sheet thickness up to 15mm Sheet length 3000mm Dimensions 3,522m high Weight approx. 10to

1 POLYTEX pinking machine type ZO-30, cutting width 300 mm, machine supplied with 2 cutting knives: 1 new serrated knife with 4 mm serration gauge, 1 flat straight knife table size 605 mm x 315 mm, manual actuation

1 KAPPA pinking machine type 41L, cutting width 410 mm, machine supplied with 3 cutting knives: 1 serrated knife with 4 mm gauge serration installed, 1 serrated knife with 4 mm gauge serration spare, 1 flat straight knife, table size 900 mm x 435 mm, manual actuation

1 POLYTEX pinking machine type ZP (Zigzag cutting), knife width 1020 mm, stroke up to 65 mm height, up to 50 cuts per minute, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge serrations, with FASNACHT security light guards, with laser cut indicator, motor power 2,2 kW, 3 x 380 V, 50 Hz, machine in immaculate condition as you can observe in the attached pictures.

1 IMPERIA pinking machine type E800 (Zigzag cutting), knife width 830 mm, working width up to 800 mm, machine equipped with precise hand lever feed mechanism, serrated knife with 5 mm gauge, with security light guards, 3 x 380 V, 50 Hz, 2.2 kW machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with total 2 knifes: 1 knife installed with gauge 5 mm, 1 knife spare 5 mm gauge, machine delivered with 2 new cutting boards (one to be used and one as spare)

Sheet thickness: 13,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm Guillotine Atlantic - XTSL 3013 MACH-ID 7122Make:AtlanticType:XTSL 3013Control:Robosoft SC5Year:1994 Control Robosoft SC5 Maximum sheet thickness13 mm Backgauge stroke X in mm1000 mm

Sheet thickness: 8,00 mm Sheet width: 4000 mm Depth rear gauge: 1000 mm -Ball screws in Backgauge -Positioning speed 100 mm/Sec -NC backgauge steps  -Stroke 190 mm   Maximum sheet thickness:8mm Backgauge stroke X in mm:0 - 1000mm Length:                 4560mm Width:                  2120mm Height:                 2145mm Weight:                 10100kg

Sheet thickness: 16,00 mm Sheet width: 3060 mm Depth rear gauge: 1000 mm Hydraulic swing beam shear Cutting thickness 450 N/mm2 16 mm Cutting thickness 700 N/mm2 10 mm Oil capacity 220 Liter Rapid blade gap adjustment  Sheet support arms front side  CE-Mark Maximum sheet thickness:    16mm Max. cutting length:        3060mm Strokes on full length:     8mm Strokes in short 1000 length:16 Cutting angle:              2.7° Length backgauge:           1000mm Number of down holders:     17 Power:                      30kW Length:                     4000mm Width:                  ...

Haco HSL 3100 x 16 mm Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Strokes/min: 5 > 10 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5 - 4°30´ Electric motor (power): 37,5 kW Length: 4160 mm Depth: 2220 mm Height: 2450 mm Weight: 15 ton

LVD HST 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Backgauge: Elgo Adjustable cuttingedge: 0,5 - 2,5° Electric motor (power): 9,5 kW Length: 3800 mm Depth: 2200 mm Height: 1800 mm Weight: 5,5 ton

LVD MVC 3100 x 12 mm Cutting length: 3100 mm Passage between uprights: 3300 mm Depth of throat: 300 mm Strokes/min: 11 > 52 str/min Adjustable cutting device: 0,05 > 1 Backgauge: 1000 mm Adjustable cuttingedge: 1 > 3° Electric motor (power): 30 HP Weight: 15 ton

Haco TS 3100 x 12 mm Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4240 mm Depth: 1900 mm Height: 2100 mm Weight: 10 ton

Safan HVS 2050 x 16 mm Cutting length: 2050 mm Max sheet thickness st 45: 16 mm Backgauge: 1250 mm Adjustable cuttingedge: 0,5 > 4° Electric motor (power): 18,5 kW Length: 3100 mm Depth: 2530 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 11x

plate high hold system CNC controlled backgague manual knife play adjustment manual cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3560 mm Depth: 1990 mm Height: 1955 mm Weight: 6,3 ton High hold system: yes Number of sheet holders: 16x

heavy duty topshear CNC controlled backgauge electric cutting angle adjustment electric knife play adjustment Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Max sheet thickness inox: 6 mm Depth of throat: 300 mm Strokes/min: 10 > 30 str/min Backgauge: CNC - 1000 mm Adjustable cuttingedge: 0,5 > 2° Electric motor (power): 9,5 kW Length: 3650 mm Depth: 2200 mm Height: 2033 mm Weight: 7 ton

Haco TS 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3050 mm Strokes/min: 12 > 32 str/min Backgauge: electric Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7.5 kW Length: 3480 mm Depth: 1500 mm Height: 1800 mm Weight: 4,5 ton

Ras 1020 x 2 mm Worklength: 1050 mm Sheetthickness: 2 mm Length: 2000 mm Width: 1060 mm Hight: 550 mm Weight: 444 kg

LVD HD CS 4100 x 6 mm Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 9 > 26 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 7,5 kW Weight: 8 ton Number of sheet holders: 22x

LVD MVCS 4100 x 5 mm Cutting length: 4100 mm Max sheet thickness st 45: 5 mm Passage between uprights: 3300 mm Depth of throat: 300 mm Strokes/min: 20 > 50 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 1,5° Electric motor (power): 10 HP Weight: 10 ton

manual backgauge with digital readout Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 15 > 65 str/min Length: 4200 mm Depth: 2000 mm Height: 1800 mm Weight: 5 ton

Darley GS 3100 x 10 mm Cutting length: 3100 x 10 mm Strokes/min: 13 > 23 str/min Electric motor (power): 15 kW Length: 3420 mm Depth: 2300 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 14x

SC7 CNC control: - backgauge - knife play - cutting angle Foldable backgauge Cutting length: 3100 mm Max sheet thickness st 45: 13 mm Strokes/min: 9 > 17 str/min Backgauge: CNC SC7 Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4030 mm Depth: 2200 mm Height: 2250 mm Weight: 9,5 ton

LVD MVS MVS 3100 x 16 mm Cutting length: 3100 mm Max sheet thickness st 45: 16 mm Passage between uprights: 3400 mm Depth of throat: 300 mm Strokes/min: 9 > 35 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5 - 2,5° Electric motor (power): 22 kW Length: 3900 mm Depth: 2300 mm Height: 2480 mm Weight: 16,8 ton

Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge with hand crank up to 500 mm Side stop and table extensions

SC 70 CNC control: - cutting angle automatic - knife play automatic - backgauge automatic Cutting length: 3100 mm Max sheet thickness st 45: 8 mm Max sheet thickness inox: 4 mm Strokes/min: 11 > 22 str/min Backgauge: CNC - 750 mm Adjustable cuttingedge: 0,5 - 3° Electric motor (power): 11 kW Length: 3950 mm Depth: 1750 mm Height: 1720 mm Weight: 5 ton