motor guillotine used for sale

Cutting length mm 2.500 Cutting thickness mm 6 Max cutting power KN 218 Back gauge travel mm 750 Cutting angle adjustment degrees 1.5 Strokes per minute 18 - 36 V-opening mm 30 Number of hold-downs n° 12 Length mm 2.995 Depth mm 1.750 Height mm 1.910 Approximate weight kg 4.500 Auction-ID: A1-48745-22

Opklapbare achteraanslag Cutting length: 3100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 17 str/min Backgauge: CNC SP8 - 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 22 kW Length: 4050 mm Depth: 1900 mm Height: 2200 mm Weight: 10 ton

Operating voltage: 380 V Frequency: 50 Hz Connection: 22 kW Nominal power Sheet thickness steel: 450 N/mm² Sheet thickness: 12 mm Max. working length: 3000 mm Max. speed: 88 mm/s Infeed max. tool weight: 31.5 kg Reference: Zafa - Lot 12 Auction-ID: A7-49882-100

Roll Splitter Guillotine RGS50 Used machine in good condition, partially overhauled immediately ready for use Year of Make: 2014 Drive power: 15kW Cutting force 2x25to Knife length: 2500mm Max aperture. 1600mm incl. base frame and feed table Work/feed height 1200mm Two-handed operation PLC supported

Roll splitter RGS25 New device, immediately available and ready for use for shredding paper and film rolls. Drive power: 7.5kW Cutting force: 25to Knife length: 1500mm Max. opening: 800 -PLC Siemens S7 -Emergency stop ripcord on both sides -Safety interlock

Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300

Manufacturer: Jean Perrot Type: MK.2006 Year: 1981 Vehicle number: 8971018 Release date: 10/03/1981 Equipment: electrically adjustable rear gauge, digital position display, on/off controls, cutting control, worktable with sheet metal supports Width displayed on order: 369.5 mm Remarks: Pre-owned condition with visible traces of oxidation. Auction-ID: A1-49695-244

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of Holds: 18 Length and number of plate carriers: 5x 500 mm, 1x 1500mm, side stop 1500mm including ball transfer units Equipped with high-holding device: No Working height: 770mm Auction-ID: A1-47360-82

Machine number: 5150 Working length: 1450 mm, max. power: 3.5 mm Reference: STS - Lot 7 Auction-ID: A7-49882-248

Schneidmaschine - Guillotine Schneider Senator SEN78 E-LINE Year 2000 - Serial-No. M-078E-004-10/30-09 Schnittbreite max. 780mm / Cutting width max. 780mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives

Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2550 mm Cutting angle adjustment - Back gauge - adjustable max. 510 mm Cutting gap adjustment - mm Total power requirement kW Machine weight approx. 1.8 t Dimensions L x W x H 3.3 x 1.4 x 1.8 m Auction-ID: A7-50084-45

Cutting length 1070mm Cutting thickness max. 2mm Material stop max. 550mm See pictures Auction-ID: A7-50084-38

Hydraulic guillotine shears with - Cutting length adjustment - Cutting angle adjustment - Support brackets - Angle stop - Rear enclosure - Mobile material container Sheet width 3050 mm Sheet thickness 6.5 mm Stand width 3100 mm Stop depth 1000 mm Cutting length variable Variable cutting gap adjustment Connected load 12.0 kW Machine weight approx. 5.5 t Dimensions approx. 3.5 x 2.2 x 1.8 m Auction-ID: A7-50084-35

Hydraulic guillotine shears with - Cutting gap adjustment - Support brackets - Angle stop Sheet width 1000 mm Sheet thickness 5.0 mm Stand width 1100 mm Stop depth 1010 mm Cutting length variable mm Cutting gap adjustment variable mm Connected load 5.0 kW Machine weight approx. 2.5 t Space requirement approx. 1.8 x 1.6 x 1.7 m Auction-ID: A7-50084-18

Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2620 mm Back gauge - adjustable 850 mm Machine weight approx. 2.8 t Dimensions L x W x H 3.2 x 1.8 x 1.7 m Condition: unchecked (6) Auction-ID: A7-50084-146

Hydraulic guillotine shears with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time-dependent) - Sheet thickness adjustment - Backgauge with free-wheeling function - Cutting line lighting - Side stop - 3 support brackets - Good condition Sheet width 3050 mm Sheet thickness 16 mm Stand width 3050 mm Stop depth 15-1000 mm Cutting angle adjustment yes ° Cutting gap adjustment yes mm Connected load 30 kW Machine weight approx. 14..5 t Space requirements approx. 4.0 x 260 x 2.55 m Auction-ID: A7-50084-25

Used, untested. System pressure: 260 bar. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-9

Electric motor, electric motor SIEMENSDrehstrom motor, power motorType 3LE16012BB233GB4Type V1Size 225MMotor speed 1475 rpm. Current consumption 84 AmpereMotor power 45 kWNet connection 400 Volt, 50 Hz.Shaft diameter 60 mmShaft pin length 140 mmKeyway width in the shaft 18 mmFlange diameter 450 mmCentering diameter 350 mmBolt circle 400 mmFlange motor with 8 mounting holes 18 mmLength motor housing without motor shaft 715 mmLength motor housing with

Electric motor, electric motor LAMMERSDrehstrom motor, power motorType 1TZ95012AA434AB4-ZBilform B3Size 200LMotor speed 2960 rpm. Current consumption 54 AmpereMotor power 30 kWNet connection 400 Volt, 50 Hz.Shaft diameter 55 mmShaft pin length 110 mmKeyway width in the shaft 16 mm- Foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mmOverall length motor housing without motor shaft 620 mmOverall length motor housing with motor shaft 730 mmSpace requirement L x W x H 730 x 400 x 520

Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000

Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Hidraulik motor Axial piston motor Type: A2FE56/61W-VZL106 NEW and fully functional, from stock, see pictures for more details.

Drive motor, DC servo motor LENZE type GFQBT 80-24Spindle motor, electric motor, main spindle motorSeries No. 184592 Year of construction: 1993Nominal power: 4.2 kWook voltage: 260 V DCNoth current: 20 ampereMaximum speed: 3000 rpm. Excitation voltage: 200 V DCexcitation current: 1.15 ampere electric brakeShaft diameter: 24 mm (shaft with 8 mm key)Shaft length: approx. 47 mm (shaft protrusion from centering edge)Centering flange diameter: 110 mmBolt circle diameter: 130 mm, 8 x M8 threaded encoder, speedometer, GBR

DC shunt motor, main spindle motor, servo motor, DC motor, DC motorSIEMENS type 1GG5134-0WH46-6HU7-ZNow power: 22.5 kWook voltage: 38 to 380 volts DCNenn current: 67 ADore number: 50 - 2160 / 4050/5000 rpmShaft diameter: mmShaft pin length: mmKeyway width in the shaft: mm- Foot motor with 4 mounting holes- with mounted external fanOverall dimension L x W x H: approx. 700 x 580 x 350 mmWeight: approx. 250 kgThe drive motor is still ready for operation in a Guild Master GDM42. The

Geared motor, electric motor, electric geared motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, geared motor servo motor -Gearbox: Type KHF47/A 11 rpm i 131.87 -Motor: Type CMP71S/PK/RH1M/SM1 -Speed: 0 - 2000 rpm -Design: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205/H210 mm -Weight: 33 kg

gear motor, electric motor, servo gear motor -Manufacturer: SEW-Eurodrive, servo gear motor type RF27 CMP63M/KY/AKOH/SM1 -Gearbox:Type RF27 455 rpm i 6.59 -Motor: Type CMP63M/KY/AKOH/SM1 -Power: 3.30 Nm -Speed: 0 - 3000 rpm -Shaft: Ø 25 x 50 mm -Dimensions: 465/140/H170 mm -Weight: 10.5 kg

Vibraton motor, 4.5 kW, FY1000-6-7.0, Vimarc, used - refurbished Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional,- Please note: The engine has been fully reconditioned by the manufacturer! - Max. CF 5370 kg, - 230/400 V - 271 kg Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of di ...

Electric Motor Siemens Simotics Main Motor Drive 1PH8284-1DB13-0BU1-Z Hersteller [manufacturer]: Siemens Type [ type]: 1PH8284-1DB13-0BU1-Z Construction year: almost as good as new Weight [weight]: approx. 1.200kg very neat condition Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phone 017621834834

Electric Motor Siemens Simotics Main Motor Drive 1PH8284-1DB13-0BU1-Z Hersteller [manufacturer]: Siemens Type [ type]: 1PH8284-1DB13-0BU1-Z Construction year: almost as good as new Weight [weight]: approx. 1.200kg very neat condition Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phone 017621834834

Key data: 15 KW, 2960 1/min

Electric motor, Flanged motor, 15kW, 2,960 rpm, 400V, AV3163A 1TZ90031DA334FB4-Z, Lammers, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Please note: A stainless steel fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - We are offering a truly special price; a comparable new motor costs approx. €1,900 excl. VAT or €2,280 incl. VAT. - Weight of the motor: 87 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product pr ...

Key data: 7 KW, 2950 1/min

Electric motor, Flanged motor, 7,5kW, 2,950 rpm, 400V, 1CV3131A, 1LE16031CA134GB4, Siemens, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function - is in its original packaging, - Please note: A fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - Weight of the motor: 79 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only ...

Key data: 22 KW, 2960 1/min

Electric motor, Flanged motor, 22 kW, 2,960 rpm, 400V, 180M-02, Premium W22, Weg, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Please note: A stainless steel fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - We are offering an exceptional special price; a comparable new engine costs around €2,100 excluding VAT or €2,500 including VAT. - The engine is fitted with thermal protection - Engine weight: 182 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of a ...

General Description Industrial three-phase electric motor manufactured by Landert-Motoren AG , model 14F . The motor is configured as a main machine motor for a REISHAUER AZA gear grinding machine and is fitted with a substantial machine-specific flange, mounting assembly and output shaft/coupling components. Technical Details Manufacturer: Landert-Motoren AG Model: 14F Machine type: Electric motor / main machine motor Serial number: 168 854/011 Motor type: 3-phase AC Power: 4.8 kW Voltage: 380 V, delta connection Current: 27 (17) A Frequency: 50 Hz Speed: 1,500 rpm Duty: S1 continuous duty Application: REISHAUER AZA gear grinding machine Machine-specific mounting flange Output shaft / coupling assembly Manufacturer location: Bülach, Switzerland Condition Used industrial condition. Surface dirt, paint wear and minor oxidation are visible. The motor appears substa ...

Equipment & options Fully lockable cockpit tent Spacious aft cockpit with bench seat Cockpit table Classic wooden steering wheel Wooden interior finish Inner steering position Navigation system / GPS Eagle Magna III Plus depth sounder/fishfinder Navman equipment Compass VHF Solar Panel Leisure battery + starter battery Refrigerator Extra fridge/cool box 2-burner gas hob Sink with tap Kitchen unit Toilet in separate toilet room Front sleeping/seating area Various storage cupboards Interior lighting Stainless steel railings Stainless steel cleats Rear swim/entry platform Swimming ladder Spacious foredeck Roof hatch Navigation lights Horn Fire extinguisher Various on-board gauges Curtains/blackout Classic brass marine instruments Belgian registration/documents Length 7,43M , Beam 2 ...

HYMER MLT 580 4x4 – MERCEDES SPRINTER – OFF-ROAD PREPARATION & LONG RANGE Superb Hymer MLT 580 4x4 on the Mercedes-Benz Sprinter, put on the road in 12/2022, with only 46,398 km. High-end motorhome that is particularly well equipped and impressively prepared for comfortable travel, even off the beaten track. Diesel engine 1,950 cc – 140 kW / 190 hp, 4x4 transmission and GVW 4,100 kg. One of its main strengths is its off-road preparation: Van Compass Stage 4.3 suspension with adjustable Falcon shock absorbers, suspension reinforcements, air suspension with compressor, TÜV documented track flares, BFGoodrich All-Terrain tyres, Bravo snorkel, external spare wheel and towbar. The range has also been particularly well cared for: 200 Ah lithium battery, booster with charging while driving, 2,000 W converter, solar panels installed on the roof, gas installation with tank and complet ...

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

see photos, 2 stubs

90 KW / 50 Hz.

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

M. No: 01/6675917

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: Spörk Condition: good (used) Power: see type plate/ motor data <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, slanted rollers or telescopic phones for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-effectively and susta ...

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de