motor 6000 v used for sale

grinding length: 600 mm grinding width: 320 mm workpiece height: 525 mm surface area: 600 x 300 mm magnetic plate: 600 x 300 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2600 x 1500 x 2000 m total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control measuring range: 50g-150g, accuracy class: XIII(1), scale graduation: 1g, readability: 1g, product weight min./max.: 10g/500g, cadence: 90rpm, measuring speed: 0.52m/s. Documentation available. On-site inspection is possible.

A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.

Hammer mill Voest Alpine Unirotor 490/190. 2 x available.

Single lot consisting of: • N. 6 Imac (years 2018/19, of different configurations) • No. 1PC All in One Dell • No. 1Ipad2 (with case) • No. 1Kyocera ECOSYS P3155DN Printer • No. 2Zebra ZT410 RFID printers • No. 1Zebra GK420T printer (for labels) • No. 2Xerox WorkCentre6515 printers • No. 1OKI B731 Printer • No. 1Xerox Phaser3320 Printer • N. 2 Shredders • No. 1Toshiba Satellite Notebook • Various phone and PC accessories • Various hard drives

VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations

Verboom PN5 Left Brand: Verboom Type: PN5 Left Year of construction: Standard: EU conformity (SHA tested) Machine Data: Saw: 2.2 KW positioned over the product Spigot heads: 2 2.2.kW, handwheel adjustable spigot heads positioned on top of each other and positioned by means of Siko analog-digital readout. 1e Vertical spindle: 5.5 kW direct drive spindle: 20040 mm and position with manual positioning and analog-digital readout. 2e Vertical spindle: 4.0 kW direct drive spindle: 120mm and position with manual positioning and analog-digital readout. Table: Manuel, with clamping Extendable length stop Stroke can also be used as miter stroke Dimensions: 3.5(0.9+0.9)1.6m

Schmalz Vacumaster Swivel Vacuum Lifter Indoor Crane Assembly Brand: Lard Type: Vacumaster Year of Make: 2008 Lifting capacity: 250 KG horizontal 200 KG vertical Operation: Electro-pneumatic fixation Swivel: pneumatic Teat: 63 cm

2001 Hurco VMX40 Technical data: - Ultimax 4 control - network card - DXF software - Tool changer 24 places - SK40 holder - Spindle speed 10-10,000 rpm - Chip conveyor - Operating hours 5279 Travels: - X-axis 1,020mm - Y-axis 510mm - Z-axis 610mm Find more here - / Contact us at -

turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-jaw chuck tool holder device tail stock Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Travel (X / Y / Z) 1,524 mm / 660 mm / 610 mm Table size 1,676 × 660 mm Table load Up to 2,000 kg Spindle holder SK50 DIN 69871 Speed range up to 8,000 rpm Spindle power 22 kW continuous power (30 min. to 26 kW) Coolant by spindle Number of seats standard: 30 Iiebtfbewt N Nhj Tpmsc Tool weight max. 15 kg Tool length max. 300 mm Tool diameter max. 125 mm (if the adjacent space is empty), otherwise 75 mm Rapid traverses (X/Y/Z) 30 / 30 / 24 m/min Machine weight approx. 10,000 Control Hurco WinMax / Ultimax Installation area (L×W×H) approx. 5,600 × 3,900 × 3,300 mm

Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Table size 1,020 mm × 510 mm Table load max. 1,000 kg Spindle holder SK 40 (DIN 69871) Spindle speed max. 10,000 min⁻¹ Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Iobjwt Rfwstfb Tpmjic Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Rapid traverse (X / Y / Z) 24 m/min / 24 m/min / 20 m/min Feeds programmable up to approx. 7,600 mm/min Control HURCO Ultimax 4 Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m

A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible.

Stock number: 3994 GABELSTABLER Manufacturer: TRUCKGAFLER VETTER , Type: 7 - 8 - 10 T Ton Year of Make: 2021 Specifications: Lifting capacity 10,000 kg Forklength 2400 mm mm Fork width 200 mm Tykkelse 60 mm

Vecoplan hacker, type 65/22/5 Technical data: - max. infeed width 650 mm - max. infeed height 220 mm - 3 feed rollers at the bottom - 2 feed rollers at the bottom - with new through rollers - excl. drive motor

Key data: 170000 KW

Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY

Control: Manufacture: FANUC 0i-MD x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm table surface area: 1100 x 500 mm spindle turning speed - stepless: 10000 U/min dimensions of the machine ca.: 3500 x 2200 x 2700 mmxmmxmm weight of the machine ca.: 6.5 t tool piece magazine with: 24 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of manufacture 2007 Travel X 1270 mm Travel Y 660 mm Travel Z 610 mm Table size 1500 mm × 660 mm Table load 1300 kg Spindle speed up to 12,000 min⁻¹ Spindle drive approx. 18 kW Tool holder SK 40 Tool Stations 24-Fold Tool Changer Rapid traverse (X/Y) 30 m/min Rapid traverse (Z) 20 m/min Machine weight approx. 9000 kg to 9500 kg Machine dimensions (L×D×H) approx. 3.25 m × 2.35 m × 2.95 m

Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2000 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ---------------------------------------------------------------------- -------- Machine is functionally tested before delivery Technical manufacturers description: -------------------------------------- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom --------------------------------------- Motor with brake: 5.5 kW Diameter 40 mm Speed 6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right --------------------------------------- Motor with brake: 11 kW Com ...

Key data: 45 °, 3 mm, 2 mm

SCM Si400 Vanguard Sliding Table Saw with Touch Screen 3-Axis Control, Mitre Landing Table Mark SCM Type SI400Vanguard M-No.: Year of manufacture 2004 Control panel: 12" touchscreen at eye level, start-stop trolley Control: 3-axis CNC control 1st cutting height 2. Saw blade tilt 3. Cutting width Memory: 999 memory positions, 6 cuts per program, auxiliary function with graphical display, collision warning Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3,000-4,000-5,000 rpm Cutting height 130 mm. (Saw blades. 400 mm-90°, 92 mm- 45°.) Saw blade swivel 0 - 45° Scoring ø120 mm 2-axle control: 1. Cutting height (radial) 2. Cutting height (axial) Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Landing table: Vanguard walking table with digital angle display +50° to –50° Anodize ...

Name: Automatic lubrication device Manufacturer: VOGEL Type: 122 135 314 Flow rate: 0.1 l/min Max. pressure: 8 bar Voltage: 100 V / 50/60 Hz Tank capacity: 1.8 l Country: Germany Short Description: Electric central lubrication pump from VOGEL for industrial applications. Compact device with transparent 1.8-litre reservoir for checking the oil level (mark MIN/MAX) and integrated control unit. Ideal for machines or production plants with a central lubrication system. Suitable for oils with high purity. Used condition, technically perfect.

turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline

A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...

complete MWM gas installations TBG620V16K 1350 KWe stamford alternator 1680 KVA

Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -

Country of origin: Germany, Weight: 200

2 units, HP: 550, Working hours: 2900

Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer

PRT EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, manual screenchanger 120 mm, water ring pelletizer, electric cabinet to be reconditioned - drawings available, New in 1999, availability: READY

CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h

VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11

VECOPLAN VAZ 120/105 U, single shaft shredder for wood, cardboard and paper, transport size : LxWxH 2,49 x 1,88 x 1,35 mt., Infeed size 1,2 x 1,05 m., 235 mm rotor Ø, rotor width 1.070 mm, Weight: approx. 2300kg, Rotor speed: 120 rpm, 18,5 kw 34.5A Electric motor with turbo clutch, V-belt drive, 2-stage, spur gearbox, motor speed 1.455 rpm 400V 50 Hz IP54 des.B3, Cobstructed in 1999, few hours worked, offered reconditioned., installed power - used power in work: about 60-65% : 20, availability: 2 weeks

x-travel: 2360 mm y-travel: 600 mm z-travel: 800 mm total power requirement: kW weight of the machine ca.: t required space: 7.1x3.7x3.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 360 / 425 / 460 mm cutting diameter: 10 - 140 mm stroke: mm cutting speed: 25 - 160 m/min total power requirement: 35 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,8 x 1,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 3000 Nominal / outside w ...

Key data: 1200 KW, 1788 kVA, 660 V

Caterpillar CG170-v12 0-hours after overhauling! New:ALL liners, piston rings, bearings, gaskets, filters, ect. total running hours engine: 31.000 1200kw 1800kva year 2013 all documents scope: genset on frame control panel breaker panel Gasline pomps transformer

Nominal pressing force ... 250t Table dimensions... 1120 x 800mm Slab dimensions ... 800 x 475mm Plunger adjustment ... 110mm L x W x H ... 1350 x 2550 x 2915mm Machine weight ... 13000kg Number of strokes ... 45/min Control Siemens The machine is in good condition, possible to test under power.

Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -

An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.

CNC Machining Center Universal Manufacturer: AXA Type: VPC 40 U Year of Make: 2003 CNC control: Heidenhain TNC 430 Travels: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60-fold Speed: 10,000 rpm Weight: approx. 20 tons.

Zusammentragmaschine / Gatherer Horizon VAC 100a

Standart Lackierkabine L6000 Premium Innenmaße (mm) ▪ Länge: 6000 ▪ Breite: 4000 ▪ Höhe: 2650 Außenmaße (mm) ▪ Länge: 6200 ▪ Breite: 4080 ▪ Höhe: 3400 Aufbau: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit

Lackierkabine Premium L7000 Innenmaße (mm) ▪ Länge: 7000 ▪ Breite: 4000 ▪ Höhe: 3700 Außenmaße (mm) ▪ Länge: 7200 ▪ Breite: 4100 ▪ Höhe: 3700 ▪ Struktur: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – Leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control

Adresseriermaschine - Addressing Machines VARIADRESS - CMC KR 2 II - 01 Year 1992 - Serial-No. CMC KR 2 II -01