motor 6000 v used for sale

Inv. Num. : 7925 Type: UPW 25.1 Producer: VEB Created: 1988 Parameters: Rolling force: 25 t Cylinder width: 250 mm Shaft diameter: 80 mm Rise: 0.5-5 mm Weight: 2900 kg Equipment: Support ruler Boundary rings Set of threading cylinders Infinitely adjustable spindle speed

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

Pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Thickness: 7.0 mm -Width: 39 mm -Length: 22,000 mm -Number: 1x ribbons available -Price: per piece -Weight: 6 kg

A2 table (650 x 650 mm)

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Basis: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung ...

We have a HURCO CNC milling machine from 2008 to offer: HURCO VMX 64T Travel: X1625 Y860 Z760 Speed max. 8000 rpm (limited by the new bearings after spindle replacement) Sporadic clamping of the interchangeable arm

Chemical pre-treatment for powder coating (3 zones) 1 Dimensions of the cabin length 3900 mm Width 1600 mm Height 2500 mm 2 dimensions of the pre-treatment complete length 4000 mm Width 3000 mm Height 4000 mm 3 Passage opening width 1000 mm Height 1700 mm The chemical pretreatment for the use of nanotechnology or phosphating consists of 3 stages in 1 spray chamber. Chemical spray pretreatment works in time and this means that the workpieces are manually pushed into the chamber. After closing the doors, the passage starts and the pumps start spraying. Each pump has different spray times. After the spraying process is finished, there is an alarm indicating that the door can be opened and the workpiece can be pulled out. All pre-treatment functions a ...

For sale is a high-quality industrial picking crane from the manufacturer VETTEN Krane & Service GmbH, specially developed for the efficient storage and picking of long goods such as steel pipes, steel bars and other elongated goods. This particular model was made in 2016 and is in excellent condition. It is ideally suited for the fully automated handling of long materials in industrial environments such as warehouses, production facilities and logistics centres. Technical details: - Manufacturer: VETTEN Krane & Service GmbH - Year of construction: 2016 - Type designation: ZLK 5tx23550 S - Load capacity: 10 tons - Net weight: 36 tons - Factory number: 16-215302 Features and Benefits: - Efficient material handling: significant time savings and efficient use of storage capacity - Automated processes: fully automatic handling of long goods, reduction of personnel costs, increa ...

Filling, weighing and packaging line: Composed of: "Ishida" multihead weigher Type CCW-M-216W-D/30-SS Heads: 16 pieces Output: up to 2 x 40 weighings/min Filling weight (max. weight): 1,500 g Accuracy: Average 0 to +1.0 g Weighing circumference: 14-1000 g Max. volume: 4,500 cc (per individual weighing) Minimum division: 0.2 g Display: Toch-screen display Power: 230V, 50Hz Connected load: 1.7 kVA In good condition + Vertical Flowpack Machine "Rovema" Type VPK260 - 14110 YOC 2001 Power (mech.) Cycles/min: 180 Roll width / diameter (max.) (mm): 450/ 550 (600 / 550 with pre-roll) Bag width (min. – max.) (mm): 60-260 Bag length (min. – max.) (mm): 120-600 Filling volume (max.) (cm³): 6000 Sealing Pressure (Max) (N): 5000 (Optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: (L x W x H) (mm): 2,200 x 1,430 x 1,620 mm Weight: 920 kg Mains ...

Glass Slices Cutting Table Used HEGLA VSG A 37 Year: 1997 Total dimensions: approx. 11.5 x 4.4 x 2.5 m Hydraulically tiltable loading table with air cushion and conveyor belt The plant has been dismantled Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Earth cable for inert gas device, electrode device -Length: 2 m -Dinse connector -With: gas hose -Weight: 5 kg

Key data: 1550 KW, 1937 kVA

We currently offer: MTU generator set Engine MTU V12 4000 Generator Marelli Type: MJR 4582G220Z3 Power 1937 KVA / 1550 KW Hz 60 Volt 690 A 1623 1800 RPM Year of construction: 2011 Operating hours are low You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Ground cable for shielding gas device, electrode device -Length: 8 m -Version: Dinse plug, gas hose, control cable, -Cooling: Water-cooled -Weight: 24 kg

Key data: 846 KW, 950 kVA, 400 V

Currently we offer a: Power Generator MWM / Deutz Type: TBD 616 V16 Power 846 KW / 950 KVA Generator AVK Type: DSG62L2-4 400 volts RPM 1500 IP 23 Built in 1999 Hours: 6225 Without control cabinet You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

working length: mm Working width: mm Working height: mm Schmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1 Pos. 1 - Article 12.01.02.10520 ------------------------------------------ with chain and Slewing Crane For handling porous large-sized workpieces. VM-MULTI-400/150 H / 90-1EG1000x675 Load 400/150 kg Design: horizontal pivot 90 ° Height: 540 mm Control Arm Length: 1025 mm Eye diameter: 5 mm Sauggreiferanzahl: 1 Suction width: 675 mm Suction length: 1000 mm Motor power: 1.5 KW Voltage (50 Hz): 230 / 400V AC3 Voltage (60 Hz): 230/460 V-Drehstom Colour: RAL 7035 light gray Vacuum Lifting Device VacuMaster Multi -------------------------------------------------- - Type VcuMaster Multi 400 / 150-90 ° -1 for the transport of plates with a porous but also with a dense surface such as raw and laminated chipboard raw and laminated MDF / OSB board, Plastic, plasterboard .. consistin ...

Manual slicer for prosciutto and other permanent cured meat products Maximum cutting width 250 mm Maximum product height 180 mm The possibility of adjusting the height of the stand Setting the thickness of the slice from 0 to 2.5 mm Hand wheel to blade ratio 1:3

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 25 mm - Injection rate: 109 cm?/s - Injection pressure: 2.400 / 2.000 bar - Injection volume: 59 cm? - Screw speed: 400 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 250 / 40,6 mm / kN - Ejector stroke / force max.: 100 / 40 mm / kN - Clamping force: 500 kN - Mould opening stroke max: 400 mm - Mould height max: 200 mm - Daylight between platens max: 600 mm - Heating zones: 4 - Platen size (h x v): 500 x 450 mm - Control: CC200 - Oil tank capacity: 135 l - Operating hours: 104.550 - Power: installed max: 5,45 + 7,5 kW - Dimensions (long x wide x high): 4.000 x 1.400 x 2.000 mm - Weight: 4.000 kg

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

Stanzmaschine für Mappen - Puching machine for wallets GBC Velo Bind Year 2002 - Serial.No. GE04190 Stanzkapazität 45 Blatt pro Vorgang / Punch Capacity Up to 45 sheets of 20 lb. Bond per lift Maschinenabmessung 27,3 cm H x 49,5 cm T x 49,5 cm B / Dimensions 27.3 cm H x 49.5 cm Dx 49.5 cm W 10 Gewicht 40 kg / Weight 40 kg. (88 Lbs.) Anschlusswerte 230 V, 50Hz, 3,5A / Electrical 115 V,50 Hz,3.5 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg

with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg

Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm

- RC200 integrated - drive package multidynamic - 1 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

- RC300 integrated - drive package multidynamic - 2 x switchable vacuum/pneumatic circuit - 1 x compressed air circuit - electric supply network: 3x380V+N+PE/60HZ - compact electric cabinet mounted on Z-axis - incl. 4DI /4DO free programmable - han

Zusammentragmaschine / Broschürenfertigung Watkiss - SlimVac Vario 10 Booklet Maker / Brochure Finishing Watkiss - SlimVac Vario 10 Zusammentragmaschine / Gatherer Watkiss SlimVac Vario 10 collator Baujahr / Year 2003 - Serial-No. ASF 1092 Format / Size min. 120 x 160mm Format / Size max. 364 x 520mm Paper weight: 40 to 240 gsm. Geschwindigkeit / Speed 2.500 - 5.000sets/hr. Auslage / Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Rüttler - Jogger VIBRO-Air Year ca. 1992 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Kanalventilator Absaugung - Duct Fan ZENNER VTZ 560/50/2-W (Absaugung - Extraction) Baujahr / Year 2001 - Serial-No. 64.031 Volumenstrom / volume flow 2.21 m3/s Totaldruckerhöhung / total increase of pressure 3880 Pa Dichte / density 1.2 kg/m3 Drehzahl / Speed 2920 min-1 Kupplungsleistung / required performance 14.4 kW Temperatur / temperature max. 80°C Zum absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vorsatzklebemaschine - End Sheet Tipping machine Hunkeler VEA 400 Year 1988 - Serial-No. 50531/10 Size min. 100x70mm - max. 420x310mm Speed 1200-6800 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

VOUMARD CNC 300 S/N: 300030 Used - Excellent Year: 2007 DESCRIPTION: Machine type: BU 1000 T L7400 Was recently removed from power due to routine upgrades and was making good parts with full functionality. Siemens 840D CNC Control. Manuals included. Has grinding capability for: Internal diameters External diameters Front faces Back faces Internal tapers External tapers Profiles Drive spigots Face keyways Cams Bilobes and trilobes Internal threads External threads Bearing tracks Located at our warehouse in Preston, Idaho. We care about the machines we sell and want all of them to enjoy continued productive and profitable service for our remarkable customers. Included specifications are gathered from various sources such as firsthand inspection, owner or operator interviews, manuals, and OEM research. All machinery specifications, condition and detail ...

Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52 Year 1990 - Serial-No. 35381-145531 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

High-performance fan Zenner, type VTZ 710/63/1 Sonder, built in 2014, consisting of control cabinet, frequency converter, cell airlock Specifications Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Sonder Year of Make: 2014 Volume: 4.72 m³/s Temperature mx.: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 1/min Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg Remark: The fan is intended for transporting paper/cardboard. In the process, the material is also chopped. The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the mac ...

Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52.D Four-directional folding unit - Vierbruchfalzwerk Year 1997 - Serial-No. 97989/97-255056 Sheet Size min 120 x 100mm - max. 520 x 360mm Speed max. 160 m/min. Cycle Rate max. 30000cycle/hour Infeed high 515 - 915mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

MIG/MAG hose package extension, intermediate hose package -Length: 30 m -Version: Dinse plug, gas hose, control cable -Weight: 68 kg