motor 6000 v used for sale

Hydraulic valve VICKERS DG4V-3-0B MU A6 60 PN507825 110 V AC Dimensions: 180 x 170 x 105 mm

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, switching-on valve -Type: MS6-EE-1/2-V24-S 527682 -Operating pressure: 4 - 18 bar -Quantity: 1x valve available -Dimensions: 180/100/H290 mm -Weight: 1.3 kg

Hydraulic valve VICKERS DGMPC-5-ABK-BAK-30 867364 315 bar Dimensions: 150 x 70 x 50 mm

Hydraulic valve (system relief valve) VICKERS DGMPC 3ABK BAK 41 ( DGMPC3ABKBAK41 ) max. 315 bar Dimensions: 100 x 45 x 40 mm

Hydraulic valve VICKERS DGMFN 3 X A2W B2W 41 ( DGMFN3XA2WB2W41 ) max. 350 bar Dimensions: 160 x 45 x 40 mm

Hydraulic valve VICKERS DG4V 30B M U H7 60 ( DG4V30BMUH760 ) max. 350 bar 24 V Dimensions: 155 x 45 x 95 mm

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, control spool, pneumatic control valve -Manufacturer: Festo, pneumatic control valve -Type: VHER-PH-B43E-B-G18 3488211 -PN: 0 - 10 bar -Dimensions: 110/70/H70 mm -Weight: 0.2 kg

Directional Control Valves VICKERS DG17V-3-6N-60 max. 350 bar New ! Dimensions: 150 x 45 x 150 mm

Pressure Relief Valve, Relief Valve VICKERS, EATON DGMC 3 PT CW 41 ( DGMC3PTCW41 ) 10-200 bar max. 315 bar New ! Dimensions: 150 x 45 x 50 mm

Pressure relief valve VICKERS RG 3F2 20 ( RG3F220 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Pressure Relief Valve VICKERS RG 3F3 30 ( RG3F330 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Pressure Relief Valve VICKERS RG 3F2 30 ( RG3F230 ) max. 135 bar New ! Dimensions: 110 x 52 x 40 mm

Hydraulic valve VICKERS DGMX1-3-PA-BW-21-B 100 bar used, tested ! Dimensions: 200 x 48 x 40 mm

Hydraulic valve VICKERS DGMFN-3-Y-A2W-B2W-21 100 bar used, tested ! Dimensions: 170 x 48 x 40 mm

Hydraulic valve VICKERS DGMX1-3-PP-BW-21-B 100 bar used, tested ! Dimensions: 200 x 48 x 40 mm

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 3 kW -Flow rate: 30 m³/h -Max. vacuum: 50 mbar -Oil-lubricated -Speed: 1430 rpm -Dimensions: 600/450/H480 mm -Weight: 110 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Type: DG4V-3-6C Quantity: 1 piece available -Weight: 2.5 kg

4/2-way valve, solenoid valve, hydraulic valve, air valve, pressure valve, valve block, control block -Type: DG4V-3 2A MU H7 6Q -Weight: 2 kg

Pressure valve, pressure gauge, pressure indicator, manometer -Measuring range: 0-6 bar -Fitting: Ø 63 mm -Thread: M12/1.5 mm -Price: per piece -Quantity: 10 available -Weight: 0.2 kg

Varistor -Batch: 96055 -Orig: A170 RPC VS -Codeno: 2322 595 53016 -Number: 4 packages available -Price: complete -Weight: 2 kg

Solenoid valve, distribution valve VOGEL DBEF 64 48 V AC 16 VA 24 V DC 11.5 W New ! Dimensions: 115 x 55 x 110 mm

Solenoid valve, distributor valve VOGEL DBEF 83/4 48 V AC 24 V DC New ! Dimensions: 200 x 50 x 110 mm

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2015 Laem System VIS100-800 1. General Characteristics The VIS Machine is designed to correct alignment errors and remove defective spans from finished reels of APET sheets. The machine is bidirectional, allowing the web to run through the machine in either direction: during the first passage (from right to left), the web is checked by the operator and if necessary the defective spans are eliminated with the help of a splicing table. Once the reel has been cleaned and rewound, it can be unloaded, or if necessary, processed again (from left to right), especially if the material is printed. The splicing table is located in a comfortable ergonomic position, and it is designed to facilitate the splice (top and bottom) of rigid materials. 2. Web materials to be handled - The doctoring machine can unwind, process and rewind APET/PE materials The thickness range to be considered is 50 � ...

The plant was installed in 2011. Vacuum conveying system operated by VOLKMANN, for grinding products in a HOSOKAWA sieve mill with enclosed metal detection. In addition available: BUSCH vacuum pump, KAESER compressor, VALCO dust extraction system, MOTEC suction device for product feeding table and much more. All components (except the exhaust system BJ 2009 and the HOSOKAWA Bexmill 200 Year ca. 2006) are from this year. There are no recorded operating hours, but should be around 6000h. The plant was decommissioned in 2019. The plant has been cleaned and disassembled. But could be put into operation for a demonstration or for recording presentation videos. Find more here - /

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation

Visolux SLVA-4K

Inv. Num. : 8160 Type: VWL 1200 Producer: MSA Created: 2015 Parameters: Axis X: 1300 mm Axis Z: 1000 mm Max. spindle speed: 500 1/min Inner diameter: 250-1400 mm Number of axes: 3 Length: 3800 mm Width: 3390 mm Height: 4400 mm Weight: 12000 kg

x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: 2500 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VITO XS Vacuum Filtration System VITO X is best suited for restaurants, bakeries or establishments with a high frying volume. The VITO XS cleans the frying oil, holds it in its 40 l tank and offers easy, hygienic transport in the kitchen. Thanks to its unique vacuum filtration, the particles remain in the filter when dry. Like every VITO frying oil filter, the XS also offers a fine filtration of 5μm and thus the optimal quality of your oil is maintained. The unique design ensures that it also works at temperatures of 200°C, but at the same time offers the highest level of occupational safety. After filtration, the oil can simply be pumped back again. Advantages: Great savings potential Optimal quality Less work Filtration capacity: up to 30 L/min Filtration: up to 5μm Material: Stainless steel 1.4301 Weight: 45 kg Max. oil temperature: 200°C Tank capacity: 40 L El ...

Manufacturer: Schultheiss Type of Machine: Vacuum Casting Machine Year of Manufacture: 2017 Power Connection: - TN-C Network: 3x400V, 50Hz/PE - Power: 18 kVA - Current: 27.6A - Fuse: 3x35A Cooling Water: - Pressure: 3.5/8 bar - Temperature (min/max): 18°C/32°C - Flow Rate: 85 l/min Compressed Air: - Output: - Voltage: 300V - Frequency: 4 kHz - Power: 150 kA - Energy: 3200 kWs CE Marked: Yes Find more here - / Contact us at -

Vacuum diaphragm press Wemhöner type VARIOPRESS model Basic 1000 S Specifications: Heating plate format (mm): 2850 x 1550 Electric heating plate design: aluminium top heating plate Total pressing force (kN): 2400 Chamber pressure max. (bar): 6 Operating temperature max.: 180 degrees Celsius Batch or workpiece size max. (mm): approx. 2460 x 1180 Thermoplastic film as roll goods: Width of the film: approx. 1430 mm Thickness of the foil (mm): approx. 0.25 - 1 Hyperbaric chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

Semi automatic edge bander Make: VITAP Type: FUSION 2.0 New machine Technical datas: - For straight and shaped pieces 10 - 60 mm - Edge thickness 1-3 mm - Tefloned gluing station with quick disassembly system - Glue and tape application on big and small shaped panels - Equipped with glue pot with 1 Kg capacity - 1 glueing roller - 2 rollers to copy the shape of the piece - 1 tilting support roller to enable the exit of the panel after banding - Glue application amount is adjusted via knob - Set up of the glue temperature - Automatic guillotine for coiled material up to 3 mm x 45 mm THREE KIND OF WORKS: - By Encoder - By Encoder + laser - By Pedal cut Panel materials - Solid wood - Chipboard (laminated or not) - Multilayer material - MDF or HDF (laminated or not) - Panel dimensions range: min 50x200mm max 1000x2000 mm - Shaped pieces Dimensions ran ...

CNC processing centre Brand: Vitap Type: Galileo 2 New machine Create great things on small space - the best kind of using 5m² production space With this 3-axis machine you can drill, mill and groove in throughfeed. Vitap Bar Nesting - efficient and time saving - This patented Software processes whole corpus elements out of one longer workpiece. - Just insert the workpiece and when you take the first finished element, the machine contues with the processing of the next element Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Hot melt contour edge bander Make: VITAP Type: SMART New machine For straight and shaped (convex or concave) pieces - To glue pieces 10-60 mm thickness, - PVC / melamine / veneer / plastic / laminate / solid wood - Edge 0,5 - 3 mm - 1 glue spreading roller 10-60 mm thickness - Guillotine to cut bands up to 3 mm thickness - 2 tape feeding speed (3m/min or 7 m/min) - Tape plate d=520mm - Glue pot 1kg capacity Solid Phenolic table - Easy to clean - No transmission of heat - Plastic cups to raise the piece above the table. So the panel weight is not focused on the glued band. - Electronic temperature control - Foot pedal cutting system - CE standards Optional for an extra charge available - Vitap glue 2 kg - Vitap glue 10 kg

This EMAG VSC 250 vertical turning machine was manufactured in 2011. It features a Siemens SINUMERIK 840Dsl control system, a robust hydraulic 6-jaw chuck, and a flange turret with 12 tool positions. With a spindle speed up to 4500 rpm and a main spindle drive power of 28kW at 40% duty cycle, its ideal for precise, efficient operations. For more information about this vertical turning machine, please reach out to us.

mobile extraction Brand:SCHUKO Typ: Vacomat 200 XPe Techncal data: Connection Ø: 200 mm Filter cleaning: motorical Nominal volume flow: 2262 m³/h Motor power: 4,0 kW Filter surface area: 14,5 m² Dust level M, AWN 16 Noise absorbation: 73 dB(A) Test sign H3 / BGHM HO 123027

description: Here we offer used inverters of the VLT5000 series. The inverters are available from 1,7 kVA 31,6 kVA. After delivery / pickup, you have the right to return the inverter without giving reasons, within 4 weeks unfree and get back the purchase price afterwards. Furthermore we have inverters of the VLT 2800, FCD and FC series in different designs and performance levels. Before delivery, the inverters are professionally formatted to allow an uncomplicated re-start. DRINK has more than 4,000 mainly used but also original packaged components in stock. Including Siemens S5 / S7 PLC. Contact us, if you can not find the right component. All statements without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as  ...

Vertical turning machine manufactured in 2000. This EMAG VSC 400 features an X-axis travel of 850 mm and a Z-axis travel of 315 mm. It is equipped with live tools for enhanced functionality and track motion loading for efficient operation. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details.

Mobile dust extractor SCHUKO Type: Vacomat 180 XPe Technical data: Connection Ø: 180 mm Filter cleaning: motorical Filter surface area: 13,5 m² Nominal volume flow: 1832 m³/h Motor power: 3,0 kW Dust level M, Test sign H3 / BGHM HO163002 AWN 16 Cone Noise absorbation: 74 dB(A)

Vibratory trough, type FRU 10/2-0-ER, built in 2011 Magnetic vibrator, type ER 42, built in 2011 - Swing width: 1.5 mm - Connected load: 230 V, 50 Hz, 2.5 A Condition: well-maintained, fully functional Availability: immediately

This 3-axis EMAG VSC 315 vertical turning machine was manufactured in 1999. It features an X-axis travel of 680 mm and a Y-axis travel of 250 mm, along with live tooling capabilities. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 315 machine we have for sale. Contact us for further details.

This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details.

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...