motor 6000 v used for sale

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Varvel, geared motor -Type: FRS40/PC 19MM i=10 IEC63B14 -Speed: 135 rpm -Motor: Verhagen type 4P.T063B 0.18 kW 1350 rpm -Protection rating: IP55 -Hollow shaft: Ø 19 x 80 mm -Design: B14 -Dimensions: 385/122/H165 mm -Weight: 6.2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Varvel, 2-speed geared motor -Transmission: Type: SXA063801114 i=8 / SRS04028G319 i=28 -Speed: 7 rpm -Motor: Leroy Somer 0.09 kW -Voltage: 230 V 1400 RPM / 380/400 V 1380 RPM -Protection rating: IP55 -Shaft: Ø 19 x 28 mm -Design: B3 -Dimensions: 355/130/H165 mm -Weight: 7.4 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Varvel, Gearbox type SRS02810G314 -Speed: 138 rpm i=10 -Engine: Leroy Somer type LS56M/T 0.09 kW -Protection rating: IP55 -Hollow shaft: Ø 14 x 60 mm -Design: B14 -Dimensions: 250/110/H145 mm -Weight: 4.4 kg

Geared motor, electric motor, electric geared motor -Manufacturer: VEM, Geared motor type ZG3 KMRA 80 G 6 -Speed: 31.5 rpm -Power: 0.55 kW -Design: B3 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Number: 1x motor available -Price: per piece -Dimensions: 485/205/H235 mm -Weight: 25 kg/pc.

Gear motor, electric motor, electric gear motor, gear motor with frequency converter -Manufacturer: Lenze, geared motor type GST05-3E VBR 063C12 with frequency converter -Speed: approx. 8 rpm i= 179.067 -Engine: Lenze MDEMA1M063-12 -Power: 0.12kW / 1425 rpm -Frequency converter: E82MV371_2B001 0.37 kW -Design: B3 -Shaft: Ø 25 x 50 mm -Protection class: IP 55 -Total dimensions: 500/250/H195 mm -Weight: 20kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type KMR 132. M4 -Power: 11 kW -Speed: 1440 rpm -Voltage: 380 V -Shaft: Ø 38/80 mm -Design: B5 -Protection rating: IP44 -Number: 2x motors available -Price: per piece -Dimensions: 525/288/H330 mm -Weight: 88 kg/unit

gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor with brake -Type: ZG2 BMREA 80 G 8-4 AF -Speed: 40/80 rpm -Power: 0.4/0.7 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Brake: 6.86 Nm -Quantity: 1 pieces available -Price: per piece -Dimensions: 560/200/H265 mm -Weight: 34 kg/piece

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Lenze, geared motor with brake -Type: GS TO5-2 M VCK 080.32BR08 -Speed: 55 rpm -Power kW -Voltage: 380V -Torque: 126 Nm -Shaft: Ø 25 x 50 mm -Brake: Spring-applied brake, release voltage 205 VDC -Dimensions: 510/210/H190 mm -Weight: 23 kg

Gear motor, electric motor, electric gear motor, spur gear motor, gear motor with brake -Manufacturer: Lenze, spur geared motor -Gear: Type GS TO4-2 B VCK 071-32 -Speed: 44 rpm / Torque: 79 Nm -Engine: Type SKhR 71-4B/1561 -Power: 0.37 kW / 1380 rpm -Shaft: Ø 20 x 40 mm -Protection rating: IP54 -Quantity: 2x geared motor available -Price per piece -Dimensions: 375/200/H165 mm -Weight: 13 kg/pc.

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöberi type R47/VW3-1028-S170-220-4 -Engine manufacturer: Loher type ABCA-100LB-04C -Engine power: 2.2 kW 1405 rpm -Speed range adjustable: 12-70 rpm -Hollow shaft: Ø40 x 160 mm -Dimensions: 880/270/H310mm -Weight: 88 kg

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST05-2W VBR 1B i= 56.875 -Adjustable gear: GST05-2K VBR 071-12 10B 59 - 11 rpm -Spring-loaded brake: -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 25 x 45 mm -Design: B3 -Dimensions: 430/280/H225mm -Weight: 21.7 kg

Three-phase motor, electric motor -Manufacturer: VEM, electric motor type K11R 160 L4 R -Power: 13.5 kW -Speed: 1470 rpm -Voltage: 380/420 V / 655/725 V -Shaft: Ø 42 x 110 mm -Protection class: IP54 -Number: 2x motor available -Price: per piece -Dimensions: 650/345/H415mm -Weight: 142 kg/pc.

Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: RTZ Witte, worm gear motor -Gearbox: RTZ Antriebstechnik/ Varvel Type FRT 85/B3 1/100 IEC80B14 i= 100 -Speed: approx. 14.3 rpm -Engine: WitteType WW 80-4 -Power: 0.55 kW / 1430 rpm -Protection class: IP55 -Shaft: Ø 32 x 70 mm -Dimensions: 485/210/H320mm -Weight: 22 kg

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Geared motor, electric motor, electric geared motor for crane motor, crane drive, electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Handover/Price: in current condition as viewed -Gearbox housing: Damage see photos -Gear motor: from electric wire rope hoist VerlindeType VT202116 -Type: VT302116N15ELP5405SEM32MD -Motor: Type: MF06LA100-131F81001E-IP55 -Power: 0.65 kW technical data see photo nameplate -Shaft: Ø 25 x 30 mm -Dimensions: 440/165/H180 mm -Weight: 9.2 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Bonfiglioli, gear motor -Speed: 22.5 rpm -Gearbox: Type VF30 N P56B14 i= 60 -Motor: Type BN 56 B4 0.09 kW -Design: B3 angle -Hollow shaft: Ø 14 x 55 mm -Protection class: IP 55 -Number: 3x gear motor available -Price: per piece -Dimensions: 260/145/H120 mm -Weight: 4.1 kg/piece

Sewing machine, industrial sewing machine, industrial sewing machine, motor control for industrial sewing machine, motor control box, motor controller -Manufacturer: Vetron, Motor Control Box for industrial sewing machine -Type: YSC-8340 -Voltage: 230V -Number: 13x control available -Price: per piece -Dimensions: 280/130/H310 mm -Weight: 4.4 kg/piece

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: KEB, servo geared motor with brake -Type: K23C TA3M V40 BP05 ER TW -Voltage: 400 V -Power: 1.88 kW -Speed: 4500 rpm -Gearbox: i= 31.57 -Hollow shaft: Ø 30 x 120 mm - Protection class: IP54 -Brake: 4.5 Nm Technical data: see photo of the nameplate -Dimensions: 470/140H200 mm -Weight: 16 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Number: 2x motors available -1x: right-hand thread -1x: left-hand thread Price: per piece -Weight: 20 kg/piece

Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Vacuum Glass Chamber Exikator Glass The glass cylinder and glass lid can be used to test reactions as well as the behaviour of a wide variety of liquids/substances/products under vacuum. Easy handling and operation Many connection possibilities volume of 13.9 liters Good and easy cleaning possibilities weight 14.5 KG Areas of application: Labore e.g. for reaction tests under vacuum production e.g. drying of components universities e.g. for preliminary research e.g. design of plastic vacuum glass chamber exiactor glass possible supply/variants: Development Various sizes of the glass vacuum chamber available A widerange of pumps available for vacuum generation heating plate vacuum flowthroughs adaptations vacuumdata for the glass chamber From safety glass seal made of Viton glass lid, it is easy to removable joint plastic inserts for a safe stand leakage rate less than 0.1 L/s external ...

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Gate valve: MAW type NW 40/32 ND 40 -Valve drive: Leibfried type LDA 309-1 pneumatic -Nominal pressure: 7 bar -Connection: inside Ø 40 mm -Dimensions: 375/150/H195 mm -Weight: 14 kg

Control: Fanuc Profesional 5 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Control: Fanuc Profesional 3 Max.travel range: X 450 mm Y 650 mm Z 460 mm Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 25 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for parts set up, lase

Vacuum lifter, vacuum lifter from Schmalz for heavy plates with new suction rubber Load capacity 150kg horizontally and vertically Vacuum cleaner can be swivelled 90 degrees motorised Suction box 1000 x 675mm Acoustic warning signal in case of too low vacuum 400V, 1.5kW Can be attached to on-site chain hoist CE mark No test book available Vacuum cleaner rubber renewed Mint condition The machine can be demonstrated on site by appointment. We offer only machines that are ready for demonstration in our warehouse, see "other offers of this year". provider".

Vacuum Vacuum Cleaner Manufacturer Nilfisk Type VHW 321 L Year of construction 2013

Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Valmet/Sisu Engine Type=612 DSE-135KW, Factory Repaired Engine with starter+alternator.New TOP-MOTOR ! info@miw-zeven.de

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

Volvo-Penta AD41A/B heat exchanger cpl.overtakes. info@miw-zeven.de

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Stack dimensions (LxWxH) - 16m x 1,4 m x 1,6 m automatic drying by means of computer Heating power - 90 kW Top Condition

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

; ready for operation

Manufacturer: Nagema . fountain pen Varifill 110/15 regulation: Glass. construction year: In 1995 Type: Monoblok 110/15 technical data: To -110 filling valves to-15-figure Kronenkorker - run direction: left on the right -Doppel-Evakuierung control: Siemens S5

Mixproof valve DN80, with welded valvehousing and balanced bottom channel. 3 pieces available Yom 2006, excellent condition.

COAX valve, see picture attached

The steam humidifier Defensor Mk5 is a pressure steam generator. It works on the principle of resistance heating. It is designed to directly (with ventilation) and indirect (corded steam distribution) humidifying of the air in conjunction with ventilation systems and air conditioning. Parameter Air Fan: Voltage: 200-240 V 50/60 Hz power consumption = U: P 26 W = maximum steam output: 16.0 kg / h Parameter MK5 Visual VE 8: 400V/3/50-60Hz, 6.1 kW

5.8 m3/h 0.25 kW

Vacuum filler Robby, filling, portioning, linking, pc control. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

for pipeline DN 200

Half Round Slicer (Staylog) Manufactured by Valette&Garreau Model: STL-33

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Wartsila VASA V32 spare parts and complete engine also. 1.Reusable Liners wear below 0.30mm – free from crack, welding or any damages:8-10 2.Reusable Cyl heads bare – pressure tested free from crack:8-10 3.Piston with groove with in limit:8-10 4.Con rod – free from crack, wear within limit:8-10 5.Fuel pump - good condition:8-10 6.Centrifugal filter-good condition:1 7.Water pump – good condition:1 8.Lube oil pump - good condition:1 9.Turbo charger 354-11- good condition:2 10.Cam shaft – 12v32 A BANK & B BANK-good condition:2 11.WOODWARD 723 card - good condition:2 12.12v32 engine block - good condition:1 13.CAM SHAFT gear & CRANKSHAFT GEAR- good condition:2 14.FLY WHEEL- good condition 12V32:1 15.AFTER COOLER - good condition 12V32:1 If you are interested in complete engine part, please inform accordingly. For your information in past, we have supplied Engine  ...

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

Vacuum filling machine Vemag Robby, filling, portioning, linking, pc control. The vacuum filler is currently in the refurbishment and you are very welcome to test the machine in Koblenz, Germany.

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...