motor 6000 v used for sale

CNC machining center Emco, type VMC 600, built in 1998 incl. handwheel + 3 vices with clamping device

Key data: 2500 kN, 700 g/PS, 60 mm

Year of construction 2002 Screw diameter 60mm Shot volume 735cm³ Clamping force 250t Min. mould installation height: 250 mm 2 Core pulls 1 air valve handling/robot ENGEL ECR 52/1-EA,RC100 6 integrated hot runner zones Operating hours only 14,109 h

- Drilling & Tapping in all directions - Can be moved in 7 axes - Fast preparation, accuracy and performence on heavy and bulky parts. - Field using Turbines, Generators, Compressors, Steel Construction, Boilers - Containers, Chemoical equipment, furnces of cement work and shipbuilding

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

degree: 500 working heigth: - mm length: 600 mm width: 600 mm depth: 600 mm total power requirement: 21 A / 14,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1 x 1 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refrigeration system with approx. 18 evaporators 1 x TK composite system 2 x Plus Verbung Refrigerant R 404 A Without capacitor

table length: 1500 mm table width: 1500 mm table load: 10 t voltage: 380 V Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain D.R.O. Additional plate on rotary table: 2.000 x 3.000 x 3.000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Item condition: in working order Availability: as of now Year of construction: 1999 Year of construction Eberhardt: 2013 Technical data: Output adjustable: 4 rows up to 3600 pieces/h, 80-160gr. 5-row up to 4500 pieces/h, 40-90gr. 6 rows up to 5400 pieces/h, 40-90gr. Connected load: 1.87 kW, 2.1 kVA Performance and weight ranges are indicative. Depending on the dough and proofing, the values may vary. Dimensions in mm Stuppling system Cutting machine A 1020 1215 B 890 890 C 1600 1600 D 1700 1700 E 2720 2420 F 2810 2730 Pre-proofing zone, plunger station and automatic stacker in one compact unit: After rounding, the dough pieces are automatically placed in the robust pre-proofing hanger. A ...

Henkovac T4 – Professional Vacuum Packaging Machine (2019), Reliable vacuum performance with robust build quality for food‑industry environments., The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products., Technical Specifications, - Model: Henkovac T4 (Tabletop), - Year: 2019 (design generation from this period), - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations, - Chamber Dimensions: approx. 530 × 590 × 460 mm, - Seal Bar Length: approx. 420 mm, - Weight: ~55 kg, - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request), Key Features, - High� ...

Load capacity 1000 kg Total height B – 260 cm Free space under the boom – 230 cm Column height – 250 cm Flange – Diameter 61.5 cm Hole pattern – 53 cm, 8 holes, diameter 30 mm Boom A – 300 cm I-profile 300 Flange width – 15 cm Rotation range – 270° Crane with Abus electric chain hoist and manual chassis Total weight – 500 kg Colour – RAL 6018 Year of manufacture – 1992 – after overhaul – Documentation

Plant for shredding of frozen blocks consisting of:, Coarse pre-cutting - Blocks are fed directly from the pallet into the machine with a forklift, the pre-cut pieces are taken over by a Z-band and transported to Vogelsang - shredding. They are inspected for metal contamination by a LOMA metal detector., The shredded parts are conveyed via a Z- conveyor belt to the batching plant. It has a capacity of approx. 2,000 kg. The batching container rests on load cells. A pallet box conveyor system ensures that the pallet boxes are filled with a preset weight and transported further after filling., Further data, photos, and videos available on request., The machines can also be purchased individually.

Manufacturer: Weeke Model: Optimat BHC Venture 1 Year of Manufacture: 2006 Operating Hours: 20000h Electrical: - Power Supply: 400V / 50 Hz / 3-phase + N - Total Power: 18 kW - Current: 35 A - Control Voltage: 24V Find more here - / Contact us at -

Key data: 500 mm, 400 mm, 400 mm

due to lack of space. MAZAK Vertical Machining Center with tool changer Manufacturer: MAZAK -- Control: MAZATROL M-PLUS Easy to use thanks to DIALOG control ---- 22 tools in the tool changer SK40 Tool Holder Technical data: Table size: 900x410mm Table load: 500 kg. Rapid traverse speed: X/ Y-axis: 26 m/min. Z-axis: 20m/min. Spindle: DIN 69871 Tool holder: SK40 Speed: 50 - 7,000 1 / min. X-axis movement: 500 mm Y-axis movement: 400 mm Z-axis movement: 400 mm Feed speed X / Y / Z Axles: 26/26/20 m/min. Renishaw tool measuring system incl. further information can be found at: abcs://abc.wk-sales.de/p/cnc-bearbeitungszentrum-mazak-v414-22b Documentation available. Spreading and loading (according to effort, option)

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Internal grinding machine VOUMARD 52A

In good condition. It is located in Jõhvi. The price is negotiable. First registration: 01.11.1996 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 12130 cm³ Motor power: 309 kW Fuel: Diesel Transmission: Manual Drive Diagram:- Certificate of Registration: EN288616

Key data: 2600 kN, 950 g/PS, 70 mm

Year of manufacture 2005 Clamping force: 260 tons. Screw diameter: 70 mm Operating hours: 125,000 h incl. removal robot: Engel ERC 55/O-E Good condition, regular maintenance, energized

Volvo FH12, born in 2000, in good condition, located in Jõhvi. The price is negotiable. First registration: 29.12.2000 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 12130 cm³ Motor power: 338 kW Fuel: diesel Gearbox:- Drive Diagram: 6 x 2 Certificate of Incorporation: EN403578

Key data: 1500 kN, 380 g/PS, 50 mm

Year of manufacture 2005 Clamping force: 150 tons. Screw diameter: 50 mm Operating hours: 117,426 h incl. removal robot: Engel ERC 34/1-E The machine is in good condition, and has been regularly serviced

Variovac Rotarius semi-automatic tray sealer with a dual-tool system owes its name to its practical rotary table: while the machine vacuum seals and gas flushes trays in one station, the operator can simultaneously remove finished trays and load new ones at the front. This prevents downtime and increases output when packaging a wide range of products from both the food and non-food sectors. Film roll diameter: up to 300 mm. Tray depth: up to 100 mm. Tray depth for skin: up to 40 mm. Product protrusion: up to 25 mm. Packaging output: 4 to 8 cycles/min. Packaging types: MAP, Skin, Sealing. Compressed air: min. 6 bar. Electrical voltage: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Ph. Busch RA 0063F vacuum pump. Control panel with Siemens S7-300 PLC and Variovac Touch screen operation panel. Pallet with foil available., Type of Machine: Tray sealer, Capacity: 4 to 8 cycles/min, Motor: 7 kW - 230/40 ...

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Non vibratory liquid and solid separator (whey sieve) previously used for separating the lumps of curd out of the whey. Stainless steel and closed design Capacities possible up to 50.000 ltr/h depending on product. Motor: 2,2 kW - 400 V - 8,2 A - 1.420 rpm - 50 Hz - 3 Ph., Type of Machine: Whey sieve, Capacity: up to 50.000 ltr/h depending on product, Motor: 2,2 kW - 400 V - 8,2 A - 1.420 rpm - 50 Hz - 3 Ph, Total dimensions: 160 x 70 x 75 cm, Weight: 270 kg

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval ThinkTop V70 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V70 series is the more flexible option compare to the V50, that can be configured to meet the needs of the most demanding valve applications such as Mixproof valves. Solenoid valves 3 x 3/2. Digital 24 VDC. Article number: 9615400012., Type of Machine: Valve-top control unit, Art. no.: 9615400012

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planer heads rear left and right All planing shafts as 4-knife shaft Automatically adjustable table height with dressing table adjustable up to 12 mm Dressing table with table extension Feed rate 7-9-11,5 / 14-18-23 m/min. 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller

Key data: 2000 KW, 2850 kVA, 400 V

MWM TCG 2020 V20 Containerized! 2000 kw 2850 kva 400volt 50hz 1500 rpm hours: 19.602 running hours. Engine Block manufacture year: 2018 Located in our yard: Kranenpool 10 6443VA Brunssum Netherlands General Power Holland BV Kranenpool 10 6443VA Brunssum Netherlands +31681163153

Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth)., Accessories: Total enclosure,, Motorized chip and clearance angle adjustment, Manual central lubrication, Coolant grinding system,, 1 arbor,, 2 magnetic sawblade holders,, 4 centering sleeves,, 1 grinding wheel holder., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 5 mm, Tooth pitch: 7-100mm, rake angle: - 20° to +40°, clearance angle: 6° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Bevel cut on the tooth face: up to 15°, grinding path max.: 20 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel diameter: 125 mm, Connected load: ...

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

Manufacturer: IMET Model: Velox 350 AF-ENC Year of Manufacture: 2017 Type of Machine : Circular Cold Saw Operating hours: 5,500 Blade diameter: 350 mm Blade arbor: 22 mm Blade speed: 3,600 rpm Feed travel: 520 mm, multiple passes Control: Electronic feed control (ENC) with front panel programming Condition: Used, fully functional Included Accessories - Extraction unit included - 6-metre roller conveyor for long profiles included Find more here - / Contact us at -

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton

Big Bag emptying station with dedusting and dosing conveyor screw.

Planetary mixer Varimixer Bear AR60/VL1 Bj.2016 - Planetary mixer / planetary mixer - Manufacturer: Varimixer Bear - Model: AR60/VL1 - with a 60 litre boiler - Incl. whisk, flat beater and dough hook - With plastic protective cover with circuit breaker - Analog control Technical data: - Year of construction 2016 - Voltage: 400 volts - Motor: 1.9kW - Plug: 1x 16A plug More pictures and information as well as transport on request.

Key data: 3000 mm, 800 mm, 720 mm

Control: Smooth X Travels X-axis: 3,000 mm Y-axis: 800 mm Z-axis: 720 mm B-axis: 220° C-axis: 360° Table Table: 3,500 mm x 820 mm Max. table load: 2,500 kg Milling spindle Drive power: 35 kW Max. spindle speed: 18,000 rpm SK-40 Tool magazine Number of tool positions: 48 Special accessories Additional work area light Tool magazine with 48 tool positions Rotary table diameter: 500 mm Chip conveyor Mayfran, ejection High-pressure pump 15 bar incl. gap filter Synch. Threading Rapid traverse constant angle of inclination Ethernet Operation Function Cylinder interpolation Hours Switch-on time: approx. 12,000 hours Spindle hours: approx. 4,500 hours

Dispermate Manufacturer: Getzmann VMA Type AE-6-M Serial No. 080 50001 Equipped with APS 3000 grinding system Tank 10 bar/-1 bar, interior capacity 3000 ml, operating temperature 200 °C Double jacket 10 bar/-1 bar, operating temperature 200 °C Power 2.2 kW, 400 V, 0-6,000 rpm GMP-compliant design Was used in the pharmaceutical sector for grinding carmine.

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

For sale is a production cell consisting of: 1 x MAZAK VARIAXIS i-800 1 x MAZAK VC PRIMOS 400 L 1 x CELLRO ELEVATE with FANUC R-2000-165 Robot Year of construction 10-2020 Commissioning 2021 MAZAK VARIAXIS i-800 5-axis machining center Smooth X control Pallet changer, 2 pallets 5-axis simultaneous machining Travels: X-axis: 730 mm Y-axis: 800 mm Z-axis: 560 mm A-axis: -120° to +30° C-axis: +-360° Max. spindle speed 10,000 rpm SK-50 mount, -Tool magazine for 120 tools -Preparation for hydraulic clamping incl. clamping function pallet -Automatic pallet changer -Electronic handwheel -Knoll coolant system KF400/2300 -Paper belt filter -High pressure pump 70 bar -Knoll chip conveyor -Renishaw NC4 Laser -Air blowing on the NC4 laser -Mazak Monitoring B, incl. Renishaw RMP600 button - Tool Breakage Monitoring (TBR) & Mazak Monitoring System (MMS) EIA/ISO  ...

Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Weight kg 454

SB Sales Shelf 950 with lighting 4 beech wood grates 12 Removal flaps bottom with shelf Connection 220V Used device

Key data: 1200 kN, 186 g/PS, 35 mm

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machiner ...

Bear Varimixer R 60 Stirring Machine Blowing Machine Kneading Machine Manufacturer : Bear Varimixer Type : R 60 Accessories: 60 litre stirring bowl, whisk, stirrer, dough hook Description R 60 Powerful stirring, beating and kneading machine for professional use. See pictures for details.

Bread roll line Eberhardt Vario-Stars / Primo-Starâ Product descriptionâœ" Manufacturer: Eberhardtâœ" Type: Vario-Star / Primo-Starâœ" Condition: used, Bakery condition

The VITO 30 cleans your frying oil while providing a simple and hygienic filtration solution for the kitchen. Like every VITO frying oil filter, the VITO 30 also filters microparticles up to 5 Âμm from the oil or grease. This preserves the optimal quality of your oil and fried food. The special design of the VITO 30 ensures that it can filter easily at temperatures up to 200°C and offers the highest level of occupational safety. After filtration, the oil can be used again immediately. Advantages:great savings potentialOptimal qualityLess

Bread press VEB Habämfa â Product description âœ" Manufacturer: VEB “Habämfa âœ" Condition: used, bakery condition, not checked For details see pictures.  

Alexanderwerk Varimixer AR 100 E Stirring / Whipping Machine 100 L Product description Manufacturer: Varimixer BEAR Type: AR 100 E Year of construction: 1999 Condition: used, functional, baker's condition Stirring, beating and kneading dough, meat and frothy masses Stepless speed adjustment Connected load: 400 V, 3.0 kW Dimensions: W.: 70 cm, D.: 120 cm, H.: 160 cm For details see pictures.