motor 6000 v used for sale

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories:, Total enclosure,, Cooling unit for dielectric,, automatic fire extinguishing system,, Mist extractor, Probe,, Machine lamp,, automatic central lubrication,, Workpiece carrier ISO50,, Measuring mandrel,, Tailstock., Cutter outside diameter: Max. 250 mm, Cutting length: max. 260 mm, Shank tool diameter: 10 - 250 mm, Outside diameter disc-shaped tools: Max. 250 mm, Tool weight max.: 20 kg, X axis travel: 275 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis mounting cone: ISWO 50, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2220 mm, Weight approx.: 4500 kg, Connected load: 4.5 kW (400 V / 50 Hz), colour: gray RAL 7045/7047

Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible.

internal diameter: 5-200 mm grinding depth: 250 mm spindle stock travel: 180 mm spindle bore: 50 mm turning speed range - spindle: 120-1000 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2.4 x 1.25 x 1.75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

enlargement: 10-100x diameter: 200 x 150 mm weight of the machine ca.: 0.15 t dimensions of the machine ca.: 0.4 x 0.5 x 0.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as saws, milling cutters etc. using the wire-electro-erosion process., Accessories:, Total enclosure,, Adaptation to A-axis on HSK63-A,E incl. test mandrel Ø 25 mm System HSK63 A,E, Integrated loading system and workpiece magazine for automated processing of up to 12 workpieces., Probe,, Automatic central lubrication,, Coolant system for dielectric fluid,, Automatic fire extinguishing system,, Mist extractor,, Machine lamp., Cutter outside diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outside diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, Tool weight: max. 20 kg, X axis travel: 500 mm, Y-axis travel: 300 mm, W-axis travel: 200 mm, A-axis rotation range: 360 °, E-axis swivel range: 180 °, Required space for the machine: 2535 x 2200 x 2280 mm, Weight a ...

Manufacturer: VISCOM Model: S3088 III Year of Manufacture: 2011 Weight: 750kg Last annual maintenance by Viscom: June 23, 2025 With a loading/unloading machine: - Manufacturer: ASYS - Type: AES 03DK - Year of manufacture: 05/11 - Weight: 335kg Find more here - / Contact us at -

Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.

Atomic Force Microscope (AFM)An Atomic Force Microscope (AFM) measures topography, feature size, defects, and properties of solid surfaces. The Dimension X AFM provides depth metrology solutions.

engine output: 3 x 1000 Watt electric 230 volt: Well-maintained industrial dry vacuum cleaner with 3 motors totaling 3 kW, refurbished hose, floor suction nozzle with tube, 3 suction nozzles. Suitable for the separation of dusts with MAK values with carcinogenic substances of groups II and III. Filters of dust classes E and N, manual cleaning with a shaker bar, dust container approx. 35 l located at the bottom with foot pedal emptying. Unit for heavy-duty commercial use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 610 mm, 610 mm

Technical data: Manufacturer: Spinner Type: VC1020 Year of Make: 2001 Control: Siemens 810D ShopMill Travel distances: X 1,020 mm, Y 610 mm, Z 610mm Switch-on hours: 31,983 h Spindle Speed: 8,000 rpm Torque: 105/70 Nm Work table Dimensions L/W: 1,200 x 600 mm Table load: 1,000 kg Tools Tool holder: SK40 Tool changer: 32-fold Dimensions and weight Dimensions L/W/H: 2,900 mm x 2,300 mm x 2,600 mm Weight: 6,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Internal mould cooling with high-pressure system Workroom with LED work lights Chip conveyor

Horizontal turning machine manufactured in 2019. This Victor Vturn-NP20 was moderately used, with only 3,000 real operating hours, and is in very good technical condition. It features a standard turning diameter of 206 mm and a bar capacity of 52 mm, making it suitable for machining small and medium-sized parts. Consider the opportunity to buy this Victor Vturn-NP20 horizontal turning machine. Contact us for further details.

General SKU237S136 MakeCollette (BE) TypeVactron GRAL 75 Mach.No.84 MG7527 Year of construction1997 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drive frequency control (variable) With lump breakercheck Rotor speed1500 & 3000 rpm MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgear(as is ) Floorspace1,8x1,0 M Total height2,0 M Weight1200 Kg Extra SpecificationsA mixer-granulator with microwave drying including: vacuum pump Busch type Huckepack 425013 2001 microwave generator thermal oil heater Conair Churchill t ...

General SKU285S352 MakeL.B. Bohle Maschinen und Verfahren GmbH (D) TypeVacumat VMA 300 EX vacuum mixer Mach.No.9201497/1 Year of construction1992 Main Features MaterialStainless steel Volume240 Ltr. Motor15.9 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Capacity90-240 ltr. Vessel sizesDia: 840x550mm With covercheck Pneumatic operated outletcheck OutletDia: 200mm With jacketcheck With motor15,9 kW 380 volt Rotor speed5-220 rpm With lump breakercheck With motor2,2 / 6,5 kW 380 volt Rotor speed1500 rpm Information LocationBarneveld With switchgear(as is) Floorspace2,4x2,1 M Total height2,9 M Weight3400 Kg Extra Specificationsincluding Leybold Sogevac SV200 B 960502 vacuum pump Universal mixersBohleMixers > Universal mixersBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

General SKU260S238 LocationBarneveld MakeF.H. Schule GmbH (D) TypeKUK 630/ III VDL-1 Pressure Working pressure12 Bar Main Features MaterialPolypropylene Pressure12 Bar Surface26 m2 Specified Features - Filterpress Filter presscheck Filter surface26 m2 Recessed chamber platescheck Number of platens52 Internal platen sizes510x510mm External platen sizes630x630mm Platen thickness45mm Frame thickness10mm Cake capacity260 ltr. Central inletdia. 50mm Connectionsdia. 50mm Hydraulic closingcheck With hydraulic unitcheck MaterialPolypropylene Information No.304224-2A Year of construction1986 Floorspace4,3x1,7 M Total height1,0 M Weight2000 KgFilterpressesSchuleFilters > FilterpressesBrand > Schule What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are wel ...

General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel Information LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BDrying ovensKlein VakuumtecnikDryers > Drying ovensBrand > Klein Vakuumtecnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium Information With switchcheck Floorspace0,6x0,7 M Total height0,5 MDrying ovensHeraeus HanauDryers > Drying ovensBrand > Heraeus Hanau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU127X744 MakeVibro-Mac Year of constructionunknown ( typeplate missing) LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume5 Ltr. Specified Features - Butterfly mixer Butterfly-mixer(1x) With hydraulic drivecheck With variable speed drivecheck With pans(1x) Capacity± 5 Ltr Pan sizesdia. 200x200mm With hydraulic liftingcheck MaterialStainless steel Information With switchgearcheck Floorspace0,7 x 0,6 m Total height1,7 m Weight350 kgButterfly mixersDiscountVibro-MacMixers > Butterfly mixersDiscountBrand > Vibro-Mac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0993 MakeVeronesi LocationBarneveld TypeAF2000 Main Features MaterialStainless steel Capacity25000 Ltr./Hr. Motor30 KW Specified Features - Separator Separatorliquid clarification Capacity25000 ltr/h Motor30 kW ATEX Max. rotor speed5106 rpm Inletdia. 85mm Liquid outletdia. 50mm Solids outletdia. 100mm MaterialStainless steel Information No.MA-2058-1 Year of construction2002 Mounted on mild steel framecheck With switchgearcheck Floorspace2,0x2,0 M Total height2,0 M Weight1600 Kg Extra SpecificationsMaterial specification: Disc stack: Incoloy® Alloy 825, :Bowl cover: Inconel® 625 :,Bowl bottom: UNS S32760 :Anti abrasion, :Liner: :Incoloy® Alloy 825, :Movable part: SAF 2205, :Fixed ring: SAF 2205, :Movable ring: :SAF 2205, :Cover: AISI 316L, : :Upper Basin: AISI316L, : :Basin: AISI 316L SeparatorsVeronesiCentrifuges > SeparatorsBrand > ...

General SKU222P196 LocationBarneveld MakeVOLLRATH TypeEWTSV 3 No.17429 Main Features MaterialMild steel Motor2 KW Specified Features - Stirrer MaterialMild steel Stirrercheck Without mixing shaftcheck Motor2,0 KW, 218-242/380-420 Volt Ex With variable speed drivecheck Speed mixing shaft348-1743 rpm Wall mixercheck Adjustable heightcheck Information Year of construction1975 Mounted on framecheck Floorspace1,7x0,6 M Total height0,9 M Weight280 KGStirrersVollrathMixers > StirrersBrand > Vollrath What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU305S482 MakeWaltter Brucks (D) LocationBarneveld TypeVIII G Main Features MaterialStainless steel Motor0.55 KW Inlet diameter635 mm Specified Features - Coating pan MaterialStainless steel Coating pancheck Pan diameter950mm Pan depth580mm In-/Outletdia. 635mm Pan can be tiltedcheck Motor0,55 kW 380/220 Volt Information No.5105 Year of construction1975 With switchcheck Floorspace1,3x1,2 M Total height2,0 M Weight350 KgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU358S867 LocationBarneveld MakeGallenkamp TypeOVL 570 010J No.4A 0007 Main Features MaterialAluminium Volume29 Ltr. Max.temp.200 °C Specified Features - Drying oven MaterialAluminium Vacuum drying ovencheck Max. temperature200 degr. C Number of compartments:1 Capacity29 ltr Internal width375 Internal depth300 Internal height260 Electric heatingcheck Electric capacity0,9 kW Number of doors:1 With trays(2x) 355x275x45mm Information Year of constructionunknown With switchcheck Floorspace0,7x0,5 M Total height0,5 M Weight60 KgDrying ovensGallenkamp UkDryers > Drying ovensBrand > Gallenkamp Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...

General SKU090W551 MakeBrabender Year of constructionunknown, With electric heating LocationBarneveld Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads DiscountViscosity test machinesBrabenderDiscountPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU306M436 LocationBarneveld MakeKusters Venlo No.60193/7 Specified Features - Shredder Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Outlet150x150mm Motor0,25kW, 230/400Volt, 1380rpm MaterialMild steel, Stainless steel 1.4301 (304) Information Year of construction2006 Mounted on legscheck With switchgearcheck Floorspace1,5 x 0,9m Total height2,1m Weight600kg Extra Specificationsblades are made of mild steelShreddersKusters VenloBreakers > ShreddersBrand > Kusters Venlo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.

General SKU254S211 LocationBarneveld CEcheck MakeZenner Ventilatoren GmbH TypeVRZ 1000/20/1 ZAH Pressure Pressure buildup0.0459 Bar Main Features Capacity13.3 m3/Min Motor18.5 KW Pressure0.045 Bar Specified Features - Blower Blowercheck Capacity799 m3/h (total increase of pressure 4587 Pa, density 0,65 Kg/m3) Motor18.5 kW 400/690 volt Inletdia. 190mm Outletdia. 190mm MaterialStainless steel Information No.78153 Year of construction2015 Floorspace2,3x1,5 M Total height1,7 M Weight1400 Kg Extra SpecificationsMax temperature 450 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

This VITAP GIOTTO edgebander manufactured in 2025 is designed for edge banding on straight, shaped, concave, and convex panels. It features a semi-automatic contour edge bander with a Teflon-coated glue pot, adjustable glue application, and an automatic roll cutting device. Ideal for handling large workpieces with its reinforced, swiveling arm and integrated vacuum. Consider the opportunity to buy this VITAP GIOTTO edgebander. Contact us for more information about this machine.

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

This 3-axis VHF CAM 20230 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 20230 Bed Type Milling Machine. Contact us for more information.

General SKU250S169 MakeDiosna Dierks & Söhne GmbH (D) TypeP/VAC P10 Laboratory Processor Mach.No.370-029 Year of construction2005 Main Features MaterialStainless steel Volume10 Ltr. Motor5 KW Specified Features - Universal mixer MaterialStainless steel 1.4404 (316L) Universal mixercheck Capacity10 ltr. Vessel sizesdia. 320x180mm With covercheck Inletdia. 100mm (1x), dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 100mm With jacketcheck With motor3 / 5 kW 400 Volt (Ex) Rotor speed240 / 478 rpm With lump breakercheck With motor1,5 kW 230/400 Volt (Ex) Rotor speed2840 rpm Information LocationBarneveld Mount.on stainless steel framecheck Mounted on wheelscheck With switchgearintegrated Floorspace1,2x2,3 M Total height1,8 M Weight1000 Kg CEcheck ATEX compatiblecheck Extra SpecificationsIncluding Tempering system brand Single type STW 1-9-B5 / 20-T ...

Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg

General SKUR0159 MakePink GmbH Thermosysteme TypeVSD-EX 650-650-140-4 Machine number2005 4783 Year of construction2005 Pressure Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialHastelloy Volume250 Ltr. Surface2.7 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface2,7 m² Drying chamber sizes670x670x140mm (4x) With jacketcheck Max. temperature115 degr. C Number of trays4 Tray sizes670x670mm Distance between the trays140mm Max. temperature115 degr.C With containers4x Container sizes650x650x40mm With 1 doorcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information LocationBarneveld With switchgearcheck Floorspace1,6x1,2 M Total height2,3 M Weight1400 Kg CEcheckTray dryersPink WertheimDryers > Tray dryersBrand > Pink Wertheim What you can expect from Foeth: ...

General SKU316S533 MakeHoeksma en Velt Zuivelwerktuigen (NL) LocationBarneveld Main Features MaterialStainless steel Volume4000 Ltr. Specified Features - Horizontal tank MaterialStainless steel 1.4401 (316) Horizontal tankcheck Capacity4000 Ltr. Top connections3100x1600 mm Outlet73 mm (2x) Motor1,3 kW 400 Volt Speed mixing shaft9,6/19 rpm. Information No.5656 Year of construction1967 Mounted on legscheck Floorspace3,8x1,8 M Total height1,8 M Weight1200 KgHorizontal tanksHoeksma & VeltTanks > Horizontal tanksBrand > Hoeksma & Velt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU303P611 MakeCPM Wolverine Proctor (UK) LocationBarneveld CEcheck TypeVariable circulation lab dryer Main Features MaterialStainless steel Volume900 Ltr. Max.temp.250 °C Specified Features - Drying oven Drying ovenvariable circulation laboratory dryer Max. temperature250 degr.C Number of compartments:1 Capacity900 Ltr Internal width800mm Internal depth1030mm Internal height1100mm Steam heatingcheck Number of doors:2 With air circulationcheck With fan(2x) Motorcirculation fan 2,0 KW, Motor exhaust fan 3,0 KW With air humidificationcheck With trays(4x) 762x508x102 28% perforated MaterialStainless steel Information No.L 09091 Year of construction2009 With switchgearcheck Floorspace2,8x2,2 M Weight2000 KG Extra Specificationsheat exchanger : Heap Dawson Limited, Serial 6744, PS 10 bar, max 250 degr.C. Drying ovensCPM Wolverine ProctorDryers > Dryi ...

General SKU364S880 LocationBarneveld MakePUC Probst & Class GmbH (D) TypePUC-Vikosator JV 10 No.64308 Main Features MaterialMild steel Motor5.5 KW Inlet diameter60 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesdia. 100x60mm Teethed rotorcheck With hoppercheck Inletdia. 60mm Outlet90x45mm Motor5.5 kW 380 Volt MaterialMild steel Information Year of constructionunknown Mounted on wheelscheck With switchcheck Floorspace0,6x0,5 M Total height1,0 M Weight140 KgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU356S861 LocationBarneveld MakeSBM Schoeller-Bleckmann Medizintechnik GmbH TypeVakutherm ADV 13 8 15 / 2F No.001431 Pressure Working pressure3.3 Bar Vacuum possiblecheck Working pressure jacket2.75 Bar Main Features MaterialStainless steel Volume2000 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Autoclave Vertical autoclavecheck Notified body(Tuv) Capacity2000 Ltr Internal width800mm Internal depth1550mm Internal height1500mm Inlet/OutletDN40, DN25, DN15 Max. temperature140 degr.C. With jacket(580 Ltr) Max. temperature140 degr.C. MaterialStainless steel 1.4404 (316L) Information Year of construction1997 Floorspace3,0x2,0 M Total height3,0 M Extra SpecificationsHeat transfer from sterilisator 6.5 KW (2x) Fan with motor 2,2KW 380 Volt AutoclavesSBMAutoclaves > AutoclavesBrand > SBM What you can expect from Foeth: -- Machine is in working cond ...

General SKU224S098 MakeNiro Atomizer (DK) TypeVFI/H/A 2,5 No.43164 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Surface1.96 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.96 m2 Bed sizes700x2800mm Product outlet200x600mm Air inletdia. 300mm Air outletdia. 350mm Drive with excentriccheck Motor2.2 kW 220-240/380-420 Volt MaterialStainless steel Information Mounted on mild steel framecheck Floorspace4,7x1,6 M Total height3,2 M Weight1800 KgFluid bed dryers continuousNiro AtomizerDryers > Fluid bed dryers continuousBrand > Niro Atomizer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visi ...

General SKU306M440 LocationBarneveld MakeKusters Venlo No.60193/4 Specified Features - Shredder MaterialMild steel, Stainless steel 1.4301 (304) Shreddercheck Double shaftcheck With hoppercheck Inlet600x400x240mm Motor0,25kW, 230/400Volt, 1380rpm Information Year of construction2006 Mounted on legscheck With switchgearcheck Floorspace1,5 x 0,9m Total height2,1m Weight600kg Extra Specificationsblades are made of mild steelShreddersKusters VenloBreakers > ShreddersBrand > Kusters Venlo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU289P522 MakeVötsch Industrietechnik GmbH TypeNTSD 75/100 Machine number577 81049 Year of construction1998 Main Features MaterialStainless steel Volume562 Ltr. Max.temp.280 °C Specified Features - Drying oven Drying ovenhot air sterilizer Max. temperature280 degr.C. Number of compartments:1 Capacity562 dm3, (Total steam capacity 1,19m3) Internal width750mm Internal depth750mm Internal height1100mm Electric capacity16,2 KW Number of doors:1 + 1 (Sterile and non-Sterile side) With air circulationcheck With fancheck Motor1,1 KW, 400 Volt With racks(3x) With timercheck MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck With switchgearcheck Floorspace1,6x1,3 M Total height2,1 M Weight900 KG Extra SpecificationsRated capacity 16,2 kW, with circulating air Fan 1,1 KW, 400 VoltDrying ovensVötschDryers > Drying ovensB ...

General SKU225T278 MakeHandtmann TypeVF100B No.1571 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Specified Features - Piston filler MaterialStainless steel Filling linecheck Dosingcheck Electric capacity5 kW Capacityup to 420 portions/min. With hoppercheck (160 Ltr.) With switchcheck Floorspace1215x2385 mm Total height1770 mm Information With switchcheck Floorspace1,5x1,3 m Total height2,1 m Weight1150 kgPiston fillersHandtmannPackaging machines > Piston fillersBrand > Handtmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Slotting Machine - Vertical VS 600 -Rotary table - diameter 600mm -Lifting range approx. 360mm -Three-jaw chuck - diameter 325mm -Good general condition Dimensions: LxWxH 1.9x1.2x2.2 meters / Weight approx. 1700Kg

greates pass round over bed: 520 mm swing diameter over bed slide: 480 mm turning length: 3000 mm control: 840 D SIEMENS number of tools: 12 Driven tools - quantity: 6 spindle bore: 103 mm c-axis: ja 0 weight of the machine ca.: t dimensions of the machine ca.: m Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POW ...

LWB Steinl VCRS-T 300/36 T / Machine like new Year of Make: 2006 Injection unit: Dosing volume: 36cc Clamping unit: Clamping force: 36 t Ejector: hydraulic Clamping unit: hydraulic Control: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit was made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Manufacturer : REHM Thermal Systems Model: VXS air 3500 (Type 734) Type: Convection Reflow Soldering Oven Quantity available: 2 units Condition: Used Key Specifications - Heating zones: 7 pre-heating zones / 3 peak zones / 4 cooling zones - Fan control: 1x top heating fan regulation - PCB width: 55 to 460 mm (with centre support from 65 mm), optional 508 mm - Chain pins: nickel-plated, 5 mm bolt length standard - Transport system width adjustment: manual (electric touchpad operation) - Heating: top and bottom heating - Display: flat screen and three-colour signal lamp - Control system: industrial PC with Ethernet network interface - Software: Vicon with Windows 10 Enterprise LTSC - Certification: CE compliant - Standby mode: Yes Find more here - / Contact us at -

Key data: 800 kN

Engel Victory 500/80 Tech / Production line with the Engel Viper 12 robot Year of Make: 2011 Injection unit: Screw diameter: 45 mm Injection weight: approx. 295 g Spray pressure: 1598 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface Hydraulic core pull x 3 Hardened injection unit - Bimetal Robot Angel Viper 12 Year of Make: 2014 5-axis robot: 4 axes are driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Purchase of the robot at an additional cost Dimensions: Weight: 5300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pumps/motor: 15 kW All off ...

Key data: 1100 kN

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 k ...

Key data: 1400 kN

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition, the machine worked in a so-called clean room Operating hours: approx. 8,000 in automatic mode Total number of operating hours: 12,005 h Euromap 67 Robot interface Air Valve x 6 Hydraulic core pull x 5 Control with hot run ...

Key data: 1400 kN

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal M ...