motor 6000 v used for sale

Key data: 1400 KW, 1800 kVA, 10500 V

MWM Gas CHP TBG 620 V16 K Gas electricity and heat generator from 1999, 83,369 operating hours, with control, silencers and table cooler. 1 available 1,354 KWel x 1,500 rpm, 10,500 V/50 Hz. AC generator: AVK DIG 130 G/4, 1,800 KVA Manufacturer: MWM Model: TBG 620 V16 K Type: Natural Gas CHP Serial Number: 69886800117 Output [KWel]: 1,354 Engine: TBG 620 V16 K Engine serial number: 2201219 Engine power [KW]: 1,400 Year of Make: 1999 Hours: 83,369 Weight gene set [kg]: 13.860 Dimensions LxWxH [m]: 6.40 x 2.10 x 2.30 AC Generator AVK DIG 130 G/4 Manufacturer: AVK Model: DIG 130 G/4 Type: AC Synchronous Generator Serial Number: 8423506 A101 Power [KVA]: 1,800 Voltage [V]: 10,500 Frequency [Hz]: 50 Current [A]: 99 Speed [1/min]: 1,500 Year of Make: 1999 Hours: 83,369

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...

x-travel: 1.200 mm y-travel: 600 mm z-travel: 675 mm Control: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm : 40 fach Distance between table and spindle: 735 mm turning speeds: 10.000 U/min spindle drive: 18 kW Internal cooling system: 30 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 / 80 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 765 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VACUREMA type 120 T-VS for the processing of rPET, technically qualified overhauled, Built in 2004, capacity up to 650 kg/h, with approval according to the standards of the F.D.A. (USA) and ESFA (EU) for direct contact of food of manufactured rPET products. Electrics European standard. Delivery Time: Short Term. Also Folien + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.

NGR S-GRAN 65 VHD, Constructed in 2011, offered checked for good conditions, including:, loading conveyor belt, tunnel metal detector, densifier, extruder with 65 mm Ø screw, degassing point, hydraulic screenchanger, water ring pelletizer, drying centrifuge, extraction vent with cyclon and bag supporting structure., conditions: used, checked, type: compact recycling line

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm

VEGA PEGASSO 145, Production year:2004, Kind of boxes: straight line / crash lock bottom / 4 corners / 6 corners / double wall boxes, Materials: cardboard gr 200 – 800 / corrugated board (waves: E-F-N-B), in production actually, Available in end of September 2024

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

A combined vertical CNC turning and cylindrical grinding center EMAG is available. Chuck diameter: 250mm, max. swing diameter: 260mm, travel X/Z: 680mm/200mm, rapid traverse X/Z: 45m/min/30m/min, grinding spindle speed: 45000rpm, tool stations: 12, basket dimensions X/Y: 400mm/600mm, basket stack: 3. Machine dimensions X/Y/Z: approx. 3200mm/1900mm/2650mm, weight: approx. 8000kg, control: Siemens 840DS, operating hours: approx. 35000h, program hours: approx. 22000h. Documentation available. An on-site inspection is possible with power.

General SKU215X084 LocationBarneveld CEcheck MakeVMI Main Features MaterialStainless steel Motor3 KW Length1290 mm Specified Features - Stirrer Stirrercheck Propellor stirrercheck Shaft length1290 mm Sizes stirring headDia. 170 mm Number of stirrers on shaft1 Motor3,0 kW, 230/400 volt, 1436 rpm, (Ex) With variable speed drivecheck Mounted on supportcheck Adjustable heightcheck MaterialStainless steel 1.4404 (316L) Information TypeT110 SE Mach.No.162928 Year of construction2011 Mounted on wheelscheck With switchcheck Floor space1,25x1,40 m Total height2,30 m Weight450 kgStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please v ...

Starting Air Valve Wärtsila Sulzer From old stock Unused!

2x Defibrillator – used - : Price per unit: 450.-€ (net) Manufacturer: defibtech Type: Lifeline view Year of Make: 2014 Condition: good Available: immediately Location: 88448 Attenweiler

Reference Num.: 4291 Brand: Xerox Type: Versant 280 Construction year: 2023 Impressions: 1 mio Available: directly Status: In production Location: Deutschland

x-travel: 610 mm y-travel: 510 mm z-travel: 610 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip tank - electronical hand wheel Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 KW, 2300 kVA, 400 V

2G Containerized MWMM TCG 2020 V16 29.000 HOURS Year 2012 by 22.000 E60 done 400volt generator installation in the Netherlands

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm table surface area: 1250 x 1250 mm spindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/min faceplate turning speed range: 7,1 - 224 U/min faceplate diameter: 600 mm table load: 4000 kg main drive motor: 11 kW max. travel of spindle: 900 mm total power requirement: 15 kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 6 x 3,1 x 3,1 m Overhauled/Modernized in 2003 - DRo Heidenhain - Faceplate with slide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade Ø: 370 mm Cutting Area at 90° round: 120 mm Square: 100 mm Rectangle: 180 x 100 mm at 45° round: 120 mm Square: 100 mm at 60° round: 110 mm Square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Space requirement: 1000 x 1000 x 1800 mm Weight: 390 kg

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm table surface area: 1250 x 1250 mm spindle taper: ISO 50 spindle turning speed range: 7,1 - 1120 U/min faceplate turning speed range: 7,1 - 224 U/min faceplate diameter: 600 mm table load: 4000 kg main drive motor: 11 kW max. travel of spindle: 900 mm total power requirement: 15 kVA weight of the machine ca.: 14,5 t dimensions of the machine ca.: 6 x 3,1 x 3,1 m - DRo Heidenhain - Faceplate with slide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 300 mm bore stroke: 200 mm spindle taper: MK 4 spindle turning speed range: 55 - 600 U/min table diameter: 500 mm column diameter: 180 mm feeds: 0,07/0,11/0,16/0,22 mm/U total power requirement: 1,47 / 1,84 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: 1,3 x 0,65 x 2,17 m Condition: ready for operation: Electric 380 Volt: Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quality grade: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25513 Specifications: - Max. working length 2050 mm - Column passage 1750 mm - Max. pressing force 850 kN - Distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 365 mm - Lifting speeds - Rapid traverse downward speed 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx. W 2700 x H 2900 x D 2100 mm - Weight approx. 9100 kg - with: - with 5 axis CNC control DELEM , DA - Y1 + 2 ; X ; R ; Z - Two-hand control panel with foot switch - Controlled crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Tool clamping - Die table displacement pneumatically supported

Werner & Pfleiderer Bread Plant composed of: 030.06913 Dough divider/weigher type V500 Year of construction 2013 1 or 2 chamber machine (depending on weight) Weight ranges: approx. 300 - 2,600 g/piece (1 chamber) approx. 150 - 1,200 g/piece (2 chambers) Output up to 3,200 pieces per hour (2 rows) with TOUCH control with digital hour counter with lubrication with extended hopper for approx. 200kg dough 030.06914 Conical round knitter type CCR 59 2002 Year of construction 2016 Weight range approx. 400 – 1,600gr Teflon coated Output approx. 3,600 pcs/h, with lubrication and blower, with heating Input 12 o'clock Issue 6 o'clock via slide Effective length approx. 6m - Tested and cleaned immediately available

wall-mounted refrigerated cabinet, Used device built in 2016 with 4 shelves 120 x 35cm Temperature range: +1 to +10°C Ready to plug in 230 V Digital temperature display with night roller blind Automatic defrost Automatic condensation External dimensions 120x65H190cm

Description Vetter Rotomax Turning Crane 80 to Details Type Rotomax Vetter Rotomax Load Turning Crane 80 to Machine no. 003074/1 Year of construction 2000 Load capacity 80,000 kg Net weight: 12,200 kg Wheel distance 1,600 - 6,000 mm Angle of inclination of the turning devices ß = 20 Max. torque 95,000 Nm Rotation speed 1.9 m/min Voltage UB 400 V 3 AC Control voltage Ust 24 V 1 AC incl. new slings and used slings incl. radio remote control

Production Orientation ////: Vertical Conveyor system ////: Feeding and discharging optional and depending on the product Foil feeder ////: rear Shaped shoulder ////: fixed Operator Display ////: Touch Screen with Memomry Function Drives & Control ////: 3 servo motors and PLC control Package length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packing height ////: depending on mould shoulder Speed ////: 20-110 bags/min. depending on material, package size and product Film width ////: 100-320 mm Consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm Plant material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Incl. Wheel Printer optional vs. Surcharge 1200,-  ...

Our state-of-the-art VFFS packaging machine is a generalist and has been developed to optimally support companies looking for the highest quality standards. With outstanding workmanship and a wide range of work, our machine offers intuitive operation that optimizes your packaging processes. The extremely powerful motors and the user-friendly colour touchscreen control system give you maximum flexibility during format changes, greatly simplifying your packaging operations. The machine has memory slots for setting the machine parameters. For this packaging line, we also offer fully and semi-automatic feeders including weighing systems, which we can also integrate for you at a later date. If you would like to optimise your packaging processes through a strong production output with high quality, we at Impuls Packaging are your ideal partner. Features of the facility 1. Single fi ...

Air consumption: 120 m³/h Pressure power: 10 bar power requirement: 15 kW Packing: ca. 1,20,81,4 m Shipping weight: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 280 mm centre distance: 1200 mm turning diameter over bed: 570 mm turning diameter over slide: 365 mm turning length: 1000 mm spindle taper: DIN 55027 Gr. 8 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 62 mm turning speed range: 3 - 2500 U/min feed:: 5000 mm / min rapid travel - longitudinal/face: 10 m/min 3-jaw-chuck diameter: 250 mm quick change toolholder: SANDVIK Coromant Capto drive capacity - spindle motor: 25 kW taper in tailstock-quill: MK 5 dia. of quill: 100 mm quill stroke: 190 mm coolant: voltage: 400 V weight of the machine ca.: 5,0 t dimensions of the machine ca.: 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 840 mm turning diameter over slide rest: 640 mm turning length: 3300 mm spindle bore: 74 mm turning speeds: 7,1-1400 U/min 3-jaw chuck: 315 mm steady: rapid traverse: turning dia. in gap: 920 mm length of gap: 370 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 6000 mm spindle bore: 82 mm turning speeds: 4,5-900 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: rapid traverse: total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Y ...

turning diameter over bed: 1000 mm turning diameter over slide rest: 760 mm turning length: 2750 mm spindle bore: 82 mm turning speeds: 3,55-710 U/min faceplate: 1000 mm 3-jaw chuck: 500 mm steady: 2 turning diameter in the gap: 1400 mm length of gap: 900 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by ap ...

Fully automatic filling line for buckets 2-5 kg. Incl. palletizing robot and wrapper.

Vevor 450SC year: 2009 450 mm cutting width digital read out electeic clamp & cutting

A vertical washing and drying system for flat glass is offered: 3 cleaning zones, 6 roller brushes, drying zone (warm air), warm water treatment (heating tank), quartz sand filter, recirculation system, suitable for: float glass, laminated glass, load capacity: 150kg/m², glass thickness: up to 15mm, working height: approx. 2000mm. Inspection possible by arrangement.

Industrial Table Cooler – Van Spall Associates We are offering a Used industrial table cooler from Van Spall Associates, a division of CHP Engineering Services Ltd – built for durability and high-efficiency cooling in demanding industrial environments. Product Specifications: Model No: ABC 123 9303 - DTS Serial No: 0204 D 9351 Test Pressure: 20 BAR Design Pressure: 16 BAR Design Temperature: 90°C / 115°C Date Tested: 13/11/99 Condition: Fully functional, tested, and ready for deployment This robust table cooler is ideal for heat exchange and cooling applications in industrial and power generation settings. Available for immediate sale! For inquiries and pricing: financeukpowergeneratorsltd.com 07379 844145

⚙ 🔧 In this package you will find multi-purpose waling WU12 Top50 in various lengths 🚧 The walings have the same function as the multi-purpose walings WS10 Top50. Due to the larger profile dimension, they are suitable for higher loads. The hole pattern is identical to that of the multi-purpose walings WS10 Top50 - they are used to transfer the load and give the formwork element stability and rigidity. Depending on the requirements, the support can be attached to the steel wall bar using different fastening devices. 💡 The multi-purpose walings are bundled on support wood. If required, we will also be happy to take care of the delivery 🚛 or you can simply pick up your multi-purpose walings yourself from the Form-on warehouse. Price: from € 41,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sa ...

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

✨ Grab it now †your top scaffold deal! ✨ We’ve got a 100 m² facade scaffold with a system width of 1.09 m , ready to use right away. The package includes a walk-through frame, adjustable base jacks, and everything you need for your next project. 🏗️ This set is based on the proven Layher Blitz frame scaffold and combines durable materials, high stability, and easy handling . The steel or aluminum decks are particularly long-lasting, and the integrated walk-throughs with ladders make working comfortable and safe. Thanks to the standardized 2.57 m frame length , the scaffold can be easily expanded and is fully compatible with all original components. 💪 The plug-in system allows for quick assembly and disassembly, saving valuable time on the construction site. At the same time, the sturdy design ensures you can work safely ...

Still working with outdated formwork systems? Time to change that. The used Dokadek 30 panel formwork brings structure to your site and focuses on what matters: quick setup , clear workflows , and safe handling .   Looking for a reliable formwork system for straightforward slab projects ? This is your chance: Buy Dokadek used †functional, robust, and ready to ship. Less lifting 🧱 , less searching 🔍 , less risk ⚠ †more focus on what really counts: moving forward. 🚀   ✅ Why Dokadek 30 (used) is worth it: ✔ Fast setup without beams ✔ Simple, intuitive system layout ✔ Minimal material variety †maximum efficiency ✔ Assembly directly from ground level ✔ Ideal if you’re looking to buy used slab formwork   ⏳ Still thinking? Others have already placed their o ...

Doka diagonal crosses in ⭐⭐⭐ star quality. The diagonal crosses are used to reinforce shoring frames. 💡 All advantages at a glance: quick and easy assembly thanks to permanently connected diagonal braces secure and quick attachment to the shoring thanks to innovative locking pawls different lengths for variable frame spacing from 1.00m to 3.00m in 50-cm-increments clear length identification using color clips and embossing compatible with both the Staxo 40 and Staxo 100 shoring systems 🔧 ⚙ 🔨 The material is supplied in stacking pallets, these are not included in the unit price. Price: from € 30,60 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwor ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...