motor 550 used for sale

1 x SEW-USOCOME helical geared motor type R47 DT71D4 Power 0.37 kW Output speed 32 rpm Motor speed 1380 rpm Reduction ratio i = 42.87 Auction-ID: A1-51157-37

Equipped with: 149.6 cc 1-cylinder 4-stroke petrol engine, approx. 6.9 kW (9.4 hp), air-cooled, automatic CVT transmission, electric start, front disc brake and rear drum brake, dimensions approx. 1800 × 740 × 790 mm and weight approx. 90 kg. Never used. Auction-ID: A1-47423-1753

See nameplate Auction-ID: A7-51245-103

Weight 510kg Auction-ID: A1-50864-191

Engine block put away while running Battery empty due to standstill 72119km Front bend at the connection of the damper rusted through, needs to be repaired Auction-ID: A3-46103-11338

Honda VFR1200XD Crosstourer from 2014, a road trail motorcycle equipped with a 1,237 cc petrol engine developing 95 kW (approx. 129 hp) and cardan final drive. Motorcycle particularly well equipped for travel with two GIVI side cases, GIVI E45 top case, Garmin Zumo GPS, large windscreen, handguards and crankcase guards. 55,200 km recorded during the technical inspection of 20/08/2024. Spoked rims, ABS and two-seater seat. Belgian documents present. First registration: 14/07/2014. Euro 3 – 1,237 cc – 95 kW – 2 seats. It presents an interesting package for a Crosstourer, not least thanks to its comprehensive touring equipment. Auction-ID: A3-46101-37235

A specialized motorcycle trailer for transporting motorcycles, equipped with a tilting drawbar and a ramp that is concealed under the loading platform. The chassis is made of curved profiles made of galvanized sheet steel and is equipped with numerous lashing points for lashing straps. The adjustable wheel clamp ensures that the motorcycle is securely and securely secured during transport. Auction-ID: A3-46136-17643

Equipped with engine: 125 cc, 4-stroke, 11 hp; Fuel: petrol (4-stroke); Transmission: Shift; Brakes: hydraulic disc brakes; Tire size: front 17\" / rear 14\"; Transport dimensions (in box): 135 × 45 × 65 cm; Transport weight: 78kg; Unused in box Auction-ID: A1-47423-1019

# Honda CM400T 395cc – 1981 – tight engine – 45,523 km Honda CM400T type NC01, first registered on 09/07/1981, equipped with a twin-cylinder petrol engine of 395 cm³ and a manual gearbox. The odometer shows approximately 45,523 km. Features : - Brand: Honda - Model: CM400T - Type: NC01 - Year: 1981 - VIN / Chassis Number: NC012201676(01) - Displacement: 395 cm³ - Fuel: Gasoline - Transmission: Manual transmission - Color: Red - Power: not specified on the documents presented - Belgian registration The bike has a custom/scrambler configuration, with raised handlebars, alloy wheels, mixed profile tyres, two-seater seat, dual instrumentation and chrome exhaust. The Honda manufacturer's plate is present on the frame. A key is visible on the ignition. The engine is tight and cannot be started. Therefore, no test drive is possible. The motorcycle is sold as a restor ...

Pigaggio X9 500 Do not drive March currently due to dead battery New tyres Helmet case Auction-ID: A3-46101-19509

Single-axle motorcycle trailer for the safe transport of a motorcycle. Compact and robust model, equipped with a fully galvanized chassis with good corrosion resistance. The trailer has a wooden floor, a central metal rail to guide the motorcycle during loading and a front wheel guard / lock to keep the wheel in position during transport. It is also equipped with several side tie-down points allowing the attachment of straps to secure the motorcycle. Features and equipment: Motorcycle trailer Single axle 2 wheels Galvanized metal frame Wooden floor Center guide rail for motorcycle Front skid plate / wheel lock Tie-down points for straps Reinforced front structure allowing lashing Metal side panels / side guards Mudguards Galvanized straight drawbar Towbar head for ball Jockey wheel Lighting and signage Side reflectors Open construction for easy loading and unload ...

Engine block put away while running For brake bleeding Battery empty due to standstill Collector's item, only for connoisseurs Auction-ID: A3-46103-11339

See nameplate Auction-ID: A7-51245-105

Features: - Front disc brake - Headlight - Turn signals / indicators - Side mirrors - Side supports / center stand - Wire wheels - Dual rear shock absorbers - Double round counter unit - Long seat - Rear light - Chrome-plated chain guard Work carried out / overhaul: - Motorcycle overhauled - Various seals replaced - Various bearings replaced - Replacing pistons - Cylinder(s) replaced/overhauled - Replacing valves and valve springs - Chain guard chrome-plated - Rear light adjusted - Turn signals adjusted - Side mirrors renewed/overhauled Included: - Box with various replaced/old parts, including parts from the overhaul work carried out Condition: used classic motorcycle in well-kept condition. Various technical overhaul work has been carried out and parts have been replaced. With signs of wear and age appropriate to the age. Execution and completeness according to photos. Auction-ID: A1-4 ...

BMW S 1000 R, first registered on 30/04/2015, equipped with the 999 cc in-line four-cylinder engine developing 118 kW, or approx. 160 hp. This sporty roadster motorcycle is equipped with a 6-speed manual gearbox and has around 66,100 km on the odometer. The bike features a Black Storm Metallic livery and features an inverted fork, an analogue and digital instrument cluster, ABS-equipped brakes, as well as 120/70 ZR17 tyres at the front and 190/55 ZR17 at the rear. According to the BMW option sheet, it has DTC, DDC, Pro riding modes, Sport package, heated grips and a gear shift assistant, among other things. A Wunderlich-branded smoke bubble, red anodized adjustable levers and axle guards are also visible in the photos. The motorcycle is accompanied by documents including registration certificates, certificate of conformity, BMW owner's manual and vehicle option sheet. Main equipm ...

Please note; So put away while walking has been standing still for some time (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47423-2500

Fiat Ducato motorhome equipped with an Elnagh Marlin airframe, put into service on 26/03/1999, with approximately 195,167 km. The vehicle has a complete layout including a kitchen with sink, three-burner stove, refrigerator, storage, convertible dinette, overcab bed and bathroom with toilet and hand shower. It is also equipped with a Fiamma side awning, a rear bike rack and, according to the owner, a solar panel installed on the roof. Around 1,000 km have been covered since major engine work carried out in 2026. A parts invoice dated 04/05/2026, in the amount of €717.01, is available. It mentions in particular the replacement of the cylinder head gasket, the timing kit with water pump, the oil cooler, the glow plugs, the thermostat, the belts and the filters. The engine starts and a video is available. However, the vehicle has not been driven or tested on the road. The gearbox, c ...

Brand/model: Suzumar MX-360/0AL (DS-360) Manufacturer: Sun Selections Co. Ltd (Etz Zone, Weihai, China), imported by B.V. Nimag, Heinenoord, Netherlands Category: C Max. persons: 5 Max. load capacity: 700 kg Max. motor power: 15.0 kW Max. motor weight: 60 kg Working pressure: tube 0.25 bar / keel 0.35 bar Serial Number: CN-SSLZE017L60 (last digit unclear/cut off) CE marking available Outboard Motor Brand: Tohatsu Corporation, Tokyo, Japan Model: MFS6BS 3R4 Year of construction: 2007 Serial Number: 015337XG Power: 4.4 kW (6 hp) Full load speed: 5000–6000 r/min Mass: 24–28 kg Trailer Single axle, with winch in front Auction-ID: A3-46140-11308

Battery down due to downtime +-3500km Model 2007 Engine block put away while running Auction-ID: A3-46103-11336

Battery flat due to standstill motorcycle yet to be introduced, NL documents Engine block put away while running Auction-ID: A3-46103-11335

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 73700 € : 1392.93 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 2 Wochen ab Auftragse : Italien : 2000 mm : 11 mm : 11 mm : 7 mm : 8 mm : 6.4 mm : 225 mm : 215 mm : 165 mm : 8 m/min : 3950 mm : 1200 mm : 1200 mm : 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the to ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 104400 € : 1973.16 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls a ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 110200 € : 2082.78 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the softwar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 100600 € : 1901.34 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll l ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 115900 € : 2190.51 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software so ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 142300 € : 2689.47 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS (PRICES ON REQUEST): hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.