128,876 used machines on RESALE, but how to find them? Machine Search
roll diameter: 550 mm roll length: 1500 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 90 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: min/max ca. 98-110 cm dimensions: ca. 40 x 8 x 256 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cone cutter Makita, type 5500 S in a fit state. Volts 220 volts motor power 1400 Watt speed of 1650/2200 lateral adjustment range 45/20 mm clamping range Max (Hxw) 240 x 210 mm trunnion strengths 0 mm to 130 mm PIN length an average 90 mm
used
Gr. Swing diameter: 600 mm Top width: 2200 mm Gr. Grinding diameter on grinding wheel 800 mm Ø: 125 mm Wheels Ø use of put sticks: 20-125 mm Grinding wheel dimensions: 800 x 28-800 x 42 x 305 mm 2 wheel speeds 3 workpiece speed: 32, 55 and 96 RPM Table Shift manual coarse/fine: 10/2 mm Machine. Feed speed of the grinding wheel: 0,005 - 0,025 mm Table 6-speed: 120-1540 mm / min Grinding spindle stock drive: 8 kW Electr. Supply: 380/400 V, 10 kW Space requirements: 6100 x 2300 x 1600 mm Weight: 7T
Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags
New Lambertini 4 jaw independent chuck 500 mm adaptation DIN 55027 - 11
approx. 100,16 running meters, H: 550cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 100,16 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 37 x stand approx. 550 cm x 110 cm, disassembled. 216 x traverse approx. 270 x 14 x 5 cm, D30. 432 x locking pins. Levels: Floor + 3 432 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 14.930,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / n ...
Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
Stainless steel silo container BSIF 550 Ltr. Content: 550 Ltr. Operating pressure: pressureless Year built: unknown Herst.: Shepherd Material: stainless steel 1.4301 container, frame iron painted Design: Rectangular container, stackable, passable with all common forklift trucks such as forklifts and lift trucks, dome lid 400 mm, drain disc valve DN 150 in stainless steel, very well maintained condition, vent cap in the upper lid, stainless steel pipe DN 80 in funnel, funnel inclination 45° last use: granules Height: approx. 1,480 mm Width/depth: approx. 1,200 mm / approx. 800 mm
approx. 36,30 running metres, H: 550cm, Compartment load: 3000 kg, pallet racks, Heavy duty racks, High racks, Industrial shelves, Shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 36,30 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 14 x stand approx. 550 cm x 110 cm, disassembled. 78 x traverse approx. 270 x 14 x 5 cm, D30. 156 x locking pins. Levels: Floor + 3 156 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 5500 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
approx. 19,60 running meters, H: 550cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial shelves, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 19,60 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 08 x Stand approx. 550 cm x 110 cm, disassembled. 42 x traverse approx. 270 x 14 x 5 cm, D30. 84 x locking pins. Levels: Floor + 3 84 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 3040,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per ...
approx. 14 running metres, H: 550cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 14 running metres Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 06 x Stand approx. 550 cm x 110 cm, disassembled. 30 x traverse approx. 270 x 14 x 5 cm, D30. 60 x locking pins. Levels: Floor + 3 60 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 2220,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
approx. 11.20 running metres, H: 550cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial shelves, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 11,20 running meters Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 05 x Stand approx. 550 cm x 110 cm, disassembled. 24 x traverse approx. 270 x 14 x 5 cm, D30. 48 x locking pins. Levels: Floor + 3 48 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1810,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per ...
Exhibition machine Inlet width: 1,400 mm Inlet height: 550 mm Rotor diameter: 1,600 mm Chopping knife count: 4 pieces Counter-knife number: 1 pc. with cutting gap adjustment Feed unit: 2 x 5 rollers Drive: 250-500 kW Machine weight: approx. 30,000 kg
approx. 8,40 running metres, H: 550cm, Compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 8,40 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 04 x Stand approx. 550 cm x 110 cm, disassembled. 18 x traverse approx. 270 x 14 x 5 cm, D30. 36 x locking pins. Levels: Floor + 3 36 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1400,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
Key data: 600
New planboard Roehm 600 mm Direct recording Camlock - 8
Machine type MIG/MAG welding system Make CEBORA Type MIG STAR 550 S Plant No. 991502 Connection voltage 3 x 400 volts Setting range 40 - 500 amperes Switch-on time 60% ED at 500 amperes 100% ED at 390 amperes Current setting 32 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant with separate DV-case Wire feed gearbox 4-wheel drive Fuse 32 Ampere Dimensions L x W x H 1,000 x 500 x 1,250 mm Weight 190 kg Age approx. 25 years Condition workshop-tested, good, incl. UVV test protocol Special accessories 3 x throttle pick-ups Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. Long 1 piece ground cable 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 piece user manual Warr ...
approx. 5.70 running metres, H: 550cm, compartment load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, shelves immediately from stock Data: H : approx. 550 cm D : approx. 110 cm L : approx. 5,70 m Load: 3000 kg compartment load Stand in galvanized Trusses 270 x 14 x 5 cm, D30 Trusses in orange Brand new BLT / PR55 manufactured in Europe & tested according to the current standard DIN EN 15512. 100% quality at the best price. Shelf consists of: 03 x Stand approx. 550 cm x 110 cm, disassembled. 12 x traverse approx. 270 x 14 x 5 cm, D30. 24 x locking pins. Levels: Floor + 3 24 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 990,00 € net plus legally valid VAT You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 € / net per piece.
Stock # U2347-3 Used mixer by Netzsch (DE) type VPI 550 with butterfly/tri-foil agitator. Mixer has contact parts designed in stainless steel. Shaft has a working length 650 mm and is equipped with butterfly agitator, with three paddles and external diameter 1080 mm. Agitator is diven by el. motor 48 kW and is hydraulically risen up to about 130 cm. Machine is equipped with local control pane and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Mixing pan is not included.
Description Hand-held battery-operated scrubbing machine with roller technology used for basic cleaning, wet cleaning, maintenance cleaning and polishing of flat floors up to 1900m²/h." Power requirement 220Volt 50Hz
oven 550 industrial 2x2x6m temperature range 100 - 550C Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel ...
Description mobile transfer BOGRAMA UEB 550 A with clocked blowing air and breakout station
Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL
IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...
IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills ...
round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Air compressor Planet Air L 550 with dryer KT 700; good condition; 550L/min.; 10 bar; incl. air dryer KT 700. Compressor Plant AIr AL 550; good condition; volume 550L/min.; 10 bar; with air dryer.
20 station collating, 1 x VAC 100a, 1 x VAC 100m, 1 x Stacker ST-40, 1 x folder ACF-30, 1 x Stitcher SPF 30, 1 x Three knife trimmer HT 330
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 800 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
new rear light, incorrectly ordered, from stock
Key data: 1025 mm, 1540 , 1090
Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 lt. Description: The EVP 550 vibratory finishing machine from ERBA has a flat work container base without separation. Emptying or separation is carried out via bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and, on request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely variable by means of a frequency converter (optional). The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligat ...
used
Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display
Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional
; Gross weight [kg]: 4200; Engine: Iveco CR13TE7W.S550; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Battery charger and coolant heater, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800
; Power [PS]: 598; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888
; Gross weight [kg]: 5071; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 888
maximum number of results exceeded
please refine your search
