136,857 used machines on RESALE, but how to find them? Machine Search
turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Industrial hall with office space with an area of 1137 m2 constructed in 2013 is located in the Pomeranian Voivodeship between Słupsk and Lębork. Its excellent location in a special industrial zone close to the S6 expressway provides good transport links of the warehouse to the larger cities of Pomerania, i.e.: – Lębork: 21.4 km, – Słupsk: 34.1 km, – Bytów: 49.2 km, – Wejherowo: 56.9 km, – Gdynia: 78.6 km. The plot on which the industrial hall is located has a total area of 10900 m2 and is divided into: – office and production hall building (1137 m2), – space around the building paved with paving stones (820 m2), – the remaining part of the plot developed into green areas (approx. 8900 m2). The industrial hall building is divided into two parts: an office and social space of 397 m2 and a production space of 740 m2. The office space is finished on a turn ...
: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FAM Mantis Belt slicer 2006, stainless, V belt slicer, HMI Touch screen controls, V belt length 2300mm, equipped with cutting wheel that holds 25 knives, up to 7000Kgs per hour, mobile, 3Ph
Ref. №: 4386 Automatic slicer 1 long portioning conveyor, approx. 2,800 mm, belt width 410 mm Maximum cut-off length (mm/inch) 0.1–55 mm Maximum value of cuts/min.: 300 Maximum infeed length 800 mm Circular blade diameter: 420 mm Cross section of product w x h (mm/inch) 280 x 160 1 standard gripper, height approx. 100 mm, width approx. 180 mm Maximum stacking height (mm)100 Connecting load (kW) 4.8 Machine dimensions in mm: Width: 1000 Length: 3800 Height: 2200 Weight: Approx. 820 kg
Machine with double magazin suitable for this .seema.de/de/products/5133 capacity / hour ca.: 6000 Magazin: single roll Drive: motor drive, inverter Shrinktunnel: hot air tunnel working direction: linear, right-left (CCW)
4 chambers with dry steam, glass doors, suitable for this .seema.de/de/products/4555 Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400
Sleevemaschine Speed 10.000 bph magazin wiwth 2 rolls and non-stop roll changeover
Line consisting of:, Marel Masterslice, Type: TA1511, Serial number: 10090783, Year of construction: 2011, Outfeed conveyor: 170 mm wide, Dimensions: 2100 x 1000 x 1500 mm, Marel Maasterfill, Type: TA1516, Year of construction: 2011, Dimensions: 1000 x 750 x 1200 mm
Qty. 1 Second-hand Slab Surface Scalper Mfc.: TBA Built: 1972 Scalped Slab Dimensions: 1000-3000 x 740-2000 x 180-350 mm – L x W x T Main Drive Electric Motor Power: 250 kW, 380 V, 735 RPM Scalping depth at once: 4-5 mm Capacity: Average 7 tons/h (For 1040 mm width slab)
Knife speed: 450 RPM, Knife set: grater, Infeed height: 1550 mm, Outfeed height: 600 mm, Power: 3 x 380V, 50Hz, 2.2kW, Dimensions: 1400 x 800 x 1550 mm, Weight: 260 kg
Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.
: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the ...
turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Double corner round slotting machine Tränklein EK-D 100; cleaned and tested; 2x Knife 16mm (other sizes on request); Insertion height max.100mm; optical sensor; Foot release. Double corner rounding machine Tränklein EK-D 100; cleaned and checked; 2x knife 16mm (other diameters on request); max.pile hight 100mm; optical sensor; foot switch.
Line is consisting of:, Treif slicer, Type: Divider 660+, Serial number: 660002.21888.133706, Year of construction: 2018, Cuts: max 2640 RPM, Slice thickness: 0.5 - 25 mm, Stacking height: up to 100 mm, Product size: max 280 x 160 mm, Product length: max 850 mm, Belt width: 385 mm, Compressed air: min 6 Bar, Power: 3 x 400V, 50Hz, 7.5kW, Dimensions: 1900 x 1050 x 2150 mm, Weight: 850 kg, Including knife holder and tool trolley, Treif / Wipotec check weigher, Belt width: 345 mm, Weighing platform: 400 mm, Dimensions: 400 x 1100 x 1050 mm, Treif transversal sorter, Belt width: 420 mm, Dimensions: 700 x 1050 x 1050 mm, Treif sorting conveyor, Belt width: 420 mm, Dimensions: 2300 x 1150 x 1250 mm, Treif knife sharpener, Type: HS-380, Serial number: 243003.61973.105787, Year of construction: 2009, Dimensions: 500 x 900 x 1650 mm, Weight: 90 kg, Variovac thermoformer, Type: Optimus, Serial num ...
Qty. 1 Second-hand Aluminium Slitting Line Manufacturer: Stamco Inc., USA Year of Manufacturing: 1981 Strip Width: 1828 mm (72”) Trim 1981 mm (78”) Untrim Thickness: 0.2 mm to 1.27 mm (0.003” to 0.050”) Line Speed: 304 m/min - 609 m/min Thread Speed: 15 m/min Input/Output Coil Weight – 10 T Input Coil OD: 2400 mm (96”) Input Coil ID: 508 mm (20”) Capacity: 8 cuts of 1.27 mm and 10 cuts of 0.9144 at line speed 304 m/min 13 uts of 0.6 mm and 21 cuts of 0.25 mm at line speed 609 m/min
Machine Specifications Wirtgen SP1500 - Base Paver - Year of Manufacture: 2007 - Operating Hours: 9,764 h Wirtgen SP1500 - Top Paver - Year of Manufacture: 2007 - Operating Hours: 10,219 h Wirtgen TCM 1800 - Texture Curing Machine - Year of Manufacture: 2007 - Operating Hours: 8,736 h Find more here - .ucymachines/ Contact us at - sales@ucymachines
turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Semi-automatic Cutting thickness 0.5 - 8mm, (without offshoots up to 24mm) ideal for meat or sausage/cheese Knife diameter 330mm with automatic acceptance of the section dig. Control Material to be cut: max. 250 x 120 mm
Bread slicer Rego Rotec 500 Year of Make: 2012 Condition: cleaned & tested Passage width: 230 mm Passage height: 140 mm Insertion depth: 500 mm Cutting thickness: 3-25 mm Max. number of slices: 145 per min. Dimensions WxDxH: 1127 x 705 x 1090 mm
Bread slicer Treif Diskus 400 Year of Make: 2007 Cutting without oil One-button operating system Areas of application: Crafts, commercial kitchens, supermarkets, bakery branches Dimensions (LxWxH): 800x700x1100 mm Weight: 195 kg Max. insertion length: 400 mm Disc thickness 4-24 mm Max. insertion cross-section (WxH): 330x150 mm Max. 130 sections per min
Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.
Bread Roll Cutter Lochbihler Leo TG Year of Make: 2016 Condition: cleaned and serviced Passage width: up to max. 160 mm Passage height: up to max. 80 mm Speed: infinitely variable Hourly output: up to approx. 2000 rolls Flow Height: Adjustable Cutting height: adjustable Height scale: for knife and upper belt Electrics: separately constructed control box Clear cover on the front Breadcrumb drawer completely removable Inlet extension: height-adjustable Inlet extension: foldable Outlet plate: Tilt angle adjustable Outlet plate: foldable 230 Volt ready to plug in
Bread slicer MWSchickart TS 38 Plus RS Condition: cleaned & tested Bread slicer with round blade Highest cutting quality Each slice in a continuous cutting thickness of 5 ? 25 mm overlapped Oil-free cutting guarantees a longer shelf life of the bread Up to 38 cm length inserts Halve the bread to 32 cm in diameter and cut it into quarters Perfect cut in an almost warm state
Qty. 1 Second-hand slitting line - dismantled Mfc.: Guida Impianti SpA Built: TBA Strip width: 20 - 650 mm Thickness: 0.20 - 3 mm Coil for 9400 kg Entry coil up to 5 ton Worked for Aluminium, LAF and Stainless Steel
Bread slicer MWSchickart TS 38 Plus Condition: cleaned & tested Bread slicer with round blade Highest cutting quality Each slice in a continuous cutting thickness of 5 ? 25 mm overlapped Oil-free cutting guarantees a longer shelf life of the bread Up to 38 cm length inserts Halve the bread to 32 cm in diameter and cut it into quarters Perfect cut in an almost warm state
turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.
Specifications Serial no: 503592/01—CAB14191 Year of manufacture 06-2005 Range: 6 meters Further description to follow as soon as possible. 07.2.230
Capacity: max 200 strokes/min, Cutting thickness: max 20 mm, Belt width: 565 mm, Outfeed height: 970 mm, Compressed air: 4 Bar, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 1200 x 1700 x 2000 mm, Weight: 750 kg
Capacity: max 200 strokes/min, Cutting thickness: max 20 mm, Belt width: 565 mm, Outfeed height: 970 mm, Compressed air: 4 Bar, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 1200 x 1700 x 2000 mm, Weight: 750 kg
As good as new pallet sliding device PSV-Ultra from SW Paratus for sale. The facility dates from 2024 and is in a very well-maintained, almost mint condition. It is ready for immediate use and is ideal for warehousing, logistics, production and professional material handling. ✅ Manufacturer: SW Paratus ✅ Model No.: PSV-Ultra ✅ Type: Euro-Lifter-CC ✅ Year of construction: 2024 ✅ Condition: Mint ✅ Immediately available The robust and high-quality design ensures reliable and efficient pallet handling in daily operation. The device has been used only a little and accordingly shows hardly any signs of use.
Very robust and very well preserved complete round timber feed make LINCK. Built in 2011. Feed deck 5 chain conveyors, step slider with 4 steps. Wood length max. 5.2 m. Suitable for medium-thick round timber. Stable side walls, including steel substructure. The system is still assembled at the original location.
Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg
Slotting Machine - Vertical VS 600 -Rotary table - diameter 600mm -Lifting range approx. 360mm -Three-jaw chuck - diameter 325mm -Good general condition Dimensions: LxWxH 1.9x1.2x2.2 meters / Weight approx. 1700Kg
Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg
Slicer Bizerba SE 12, Diagonal Cutter, Connection 400V, year of construction 2006, Dimensions approx. 70x60x45cm, weight approx. 50kg good used condition, fully functional
Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg
maximum number of results exceeded
please refine your search
