126,701 used machines on RESALE, but how to find them? Machine Search
Sliding Belt Magnetic Conveyor, Magnetic Slide Conveyor GÖSSLING Z-Conveyor, Sliding Belt System, Conveyor Belt, Magnetic Belt ConveyorMasch. No: 21113628 02 / 2053405 60 Year of construction 2002 / 2016 overhauledSlide width 255 mmDistance of permanent magnets 270 mmInsertion length approx. 1000 mmInsertion height 200 mmSlide-in width 390 mmConveying height - discharge height approx. 1000 mmConveying speed approx. 15 meters/min. Motor power belt drive approx. 0.55 kWNe-connection 400 volts, 50 Hz- Circulating chain equipped with permanent magnets- Overall height
Clamping plate with T-slots made of cast steel-grey cast ironBase plate of radial drilling machineAssembly table, assembly station, base plate for column-slewing craneLength 1850 mmWidth 915 mmPlate thickness 230 mmTable surface with T-slots 1030 x 750 mm- Clamping surface with T-slots 22 mm, distance = 250 mm- Milled top side parallel to the underside = clamping surface- Milled underside also the bars lie flat and support- Ideal as a base plateDead weight 1140 kggood condition; used
Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used
Round clamping plate with T-slot straightening plate and clamping tableDiameter 1500 mmCentering hole in the middle 80 mmPlate thickness 54 mmWorking height 970 mm- 6 T-slots 18 mm- 3 threaded holes M20, bolt circle 1000 mm- Steel substructure without centric holeWeight 785 kggood condition; used
Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040
Crane Motor, Travel Drive Crane Bridge Drive with GearSliding Armature Motor, Thrust Bencher Motor, Three-Phase Electric Motor, Brake Motor, Crane Motor, Rope Hoist Drive, Crane Drive, Lifting Motor, Fine Stroke MotorManufacturer: DEMAGMotor Type: 24/10 KF8-2Motor No.: 982869Motor Design: B5Rated Voltage: 380 VAC Rated Frequency: 50 HzPower Level 1: 0.58 kW = 715 rpm. Power level 2: 2.3 kW = 2900 rpm.with gearbox DEMAG type KS 12Reduction gearboxFabr. No. 1909104Translation: i = 118with impeller for crane rail2 pieces available,
Column slewing crane DEMAG type KBK 1Year of construction: approx. 1980Lifting capacity 500 kgSlewing range 270Radius 2000 mmOverall height 2300 mmHeight to lower edge boom 1800 mm- Boom profile DEMAG C-profile rail KBK 1- Carriage for DEMAG C-profile rail KBK 1- Base plate crane column L x W x H = 370 x 370 x 20 mm (4 holes approx. 27 mm)Net weight 145 kg; used
A complete Rösler mass finishing machine is available. 1) Central mass finishing machine (centrifugal system) Rösler RotoMatic R 280/24 SE, year of construction: 2008, connected load: 18kW, weight: approx. 7500kg. 2) Rotary dryer Rösler RT 550 EURO-So., year of construction: 2008, connected load: 8.9kW, weight: approx. 1050kg. 3) Rösler R 290/4500 FB/T conveyor belt, year of manufacture: 2008, belt width: 290mm, belt length: 4900mm, connected load: 0.55kW, weight: approx. 430kg. 4) Buffer chute Rösler R 16/6/4 PR, year of construction: 2008, connected load: 4kW, weight: approx. 570kg. 5) Feeding unit Rösler BE 200 K-So., year of manufacture: 2008, connected load: 1.1kW, weight: approx. 200kg. Documentation available. On-site inspection is possible.
Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging / Weighing / Labeling KUCHLER S.A.M. P3 Specifications: Slicer type: SAM P3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Scale/Labeler: Mettler Toledo PAZ UC-GTT-M 400 Volt / 50 Hz / 3.79 A Year of Make: 2015 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated New price in this version approx. EUR 45,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Fully Automatic Slicer Packaging Line Cutting / Depositing / Packaging KUCHLER S.A.M. PX3 Specifications: Slicer type: SAM PX3 /26 (wide version with large chain frame, offshoot and conveyor belt) Type Foil Machine: SAM Foil Maker 21/26 Type Packer: SAM Welding Station 21/26 400 Volt / 50 Hz / 3.55 A Year of Make: 2019 Foil size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Output up to 150 parcels per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, Teflon-coated including original knife sharpener including original knife lifter including adjustment boards for each individual machine including 1 package of foil New price in this version approx. EUR 55,000 Function checked, machine ready for immediate use! Condition, see original pictures! If you have ...
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: EST Ticino Type: ET-BM 400 Turning length: 1500 mm Turning diameter bed Ø: 800 mm Turning diameter slide: 470 mm Turning diameter pit Ø: 400 mm Pit length: 750 mm Spindle bore: 130 mm Power spindle: 15 kW Bed width: 600 mm Quill: 130 Ø Stroke quill: 300 mm Spindle mount: 6 Mk Speed: 600 rpm Dimensions (estimated) Length: 4500 mm Width: 1800 mm Height: 1800 mm Weight: 5200 kg with accessories: -Safety equipment - Face plate, four-jaw chuck, clamping jaws, tool holders, tips, drill chucks, tools All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the S ...
Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions
A complete vibratory finishing system Rösler, consisting of several components, is available. 1) Trough-type system Rösler R 550/4600 DA, connected load: 15kW, weight: approx. 6000kg. 2) Water treatment centrifuge Rösler Z 600 ASS-1-Turbo. 3) Conveyor belt Rösler R 360/4100 FB/S, belt length: 8220mm, width: 379mm, weight: approx. 400kg. 4) Conveyor belt Rösler R 360/2800 FB/T, belt length: 5650mm, width: 379mm, weight: 230kg. 5) Discharge belt Rösler R 600/2000 FB/T, belt length: 4050mm, width: 620mm, weight: approx. 310kg. Documentation available. An on-site inspection is possible.
gebr. Slotted Hole Drilling Machine GANNER GANNOMAT Junior LBM 320 Drilling on 2 levels YOC 1992 Motor power: 1.5 kW (380V / 16A plug) Rated current: 3.4 A Spindle speed: 3,000 rpm Pneumatic height adjustment: 150 mm Clamping height of the workpieces: max. 250 mm Working height: 850 mm Dowel pitch: 12 mm 2-lever operation 2 pneum. Workpiece clamp 3 plug-in stops (2x 90°, 1 x mitre stop) Compressed air connection: 6 bar Weight: 270 kg Floor space: 1,200 mm x 1,000 mm Technical data according to manufacturer's specifications.
Slotted hole drilling machine SAMCO AS 16 -used-engine movable, dowel drilling device---------- Technical data ----------Work table dimensions: 550 x 285 mm, drilling width: 190 mm, drilling depth: 120 mm, speed: 2,840 rpm, motor: 1.5 kW, weight: 220 kg
Sliding table saw ALTENDORF F 35 Type 3 - 1000-Exhibition-Machine-5.5 kW (7.5 HP), 3 speeds, Motorized height and swivel adjustment, Large protective cover, Double trolley 3,200 mm, Scoring unit with LED lighting, CNC parallel fence, Cutting width 1,000 mm, Angle mitre stop 3,450 mm, without length compensation, Table top extension/table top extension:, With high-quality CDF surface---------- Technical data ----------Swivel range: 0 - 46 Â, Carriage length: 3,200 mm, Cutting length: 3100 mm, Cutting width:
Sliding table saw ALTENDORF F45 -used-double trolley, scoring unit, rip fence with fine adjustment, boom table, hydraulic height adjustment, hydraulic swivel adjustment, digital display of the swivel angle, speed display, table extension anodized aluminum, table extension aluminum anodized, angle mitre stop, upper protective cover narrow and wide, automatic brake, dust-tested---------- Technical data ----------Swivel range: 45 Â, carriage length: 3,200 mm, Cutting width: 1,300
A roll slitting machine Euromac is available. Materials: monolayer plastic, laminates, extrusion film, paper, metal foil, and aluminium laminates. Working speed: 300m/min, film width range: 500mm-1300mm, max. roll diameter: 920mm, roll core diameter: 76mm/152mm (3 inch/6 inch). The system can only unwind and trim. Without 100% web inspection. Includes Sick safety device. Documentation available. An on-site inspection is possible.
Belt conveyor slider 1900-300-1050 Make: Transnorm like new, showroom machine Year 2018 Length:1900 mm Belt width: 300 mm Stand dimensions: 790x480 mm Current conveyor belt height: 1050 mm Adjustable foot height: 100 mm Maximum ejection width: 890 mm Belt conveyor speed: 0,03-1,487m/s Electrical data Completely wired with sensors, direct wiring in the control box Belt conveyor motor data: V300-500, kw 0,75/S1 with frequency converter Ejection motor data: V300-500, kw 0,11-1,1/S1 with frequency converter and Brake Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Belt width in mm: 300 Conveying length in mm: 1900 Antrieb: SEW Getriebemotor mit MOVIMOT Foot plates: 790x480 Conveyor speed m / s: 0,03-1,487 Bauhöhe in mm (BH): 1050 For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be ...
GRAEF MASTER 3370 Specifications: 400 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:
Fully automatic slicer / slicer GRAEF VA 800 / Art.Nr. VA804DE-C3 Specifications: 230 Volt / 50 Hz / 2.4 A / 500 W Knife diameter: 300 mm Stainless steel knife including underframe trestle Machine with CERA 3 coating Machine weight: 75 kg Year of Make: 2017 Knife speed 229 rpm Cutting thickness: 0.5 to 10 mm Stacking up to 4 stacking trays Longitudinal and transverse compartments, variable up to 4 rows, and round shelf Carriage designed for up to 40 cm of food to be cut Condition, see original pictures! If you have any questions, email or call.
Height=0.45 m, Overall length= 0.2 m, Overall width= 0.45 m, Net weight= 20 kg,
Height=0.98 m, Overall length= 0.8 m, Overall width= 0.91 m,
Height=1.31 m, Overall length= 0.64 m, Overall width= 1.11 m, Net weight= 178 kg,
Height=1.35 m, Overall length= 0.74 m, Overall width= 0.97 m, Net weight= 250 kg,
Height=1.6 m, Overall length= 1.3 m, Overall width= 1.05 m, Net weight= 780 kg,
Height=0.4 m, Overall length= 0.45 m, Overall width= 0.45 m, Net weight= 20 kg,
Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,
Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,
Height=1.93 m, Overall length= 0.8 m, Overall width= 2.37 m, Net weight= 465 kg,
Height=2 m, Overall length= 2.3 m, Overall width= 1.95 m, Net weight= 450 kg,
Height=0.46 m, Overall length= 0.63 m, Overall width= 0.59 m, Net weight= 48 kg,
Height=1.11 m, Overall length= 0.71 m, Overall width= 1.05 m, Net weight= 280 kg,
Height=1.25 m, Overall length= 0.98 m, Overall width= 1.85 m, Net weight= 314 kg,
Height=0.46 m, Overall length= 0.625 m, Overall width= 0.585 m, Net weight= 45 kg,
Height=1.3 m, Overall length= 0.8 m, Overall width= 1.86 m, Net weight= 204 kg,
Height=0.46 m, Overall length= 0.625 m, Overall width= 0.585 m, Net weight= 45 kg,
Height=1.835 m, Overall length= 2.32 m, Overall width= 0.8 m, Net weight= 480 kg,
Height=1.68 m, Overall length= 2.27 m, Overall width= 1.48 m, Net weight= 936 kg,
Height=1.31 m, Overall length= 2.73 m, Overall width= 1.05 m, Net weight= 565 kg,
Height=1.1 m, Overall length= 0.65 m, Overall width= 0.51 m,
Height=1.37 m, Overall length= 0.7 m, Overall width= 1.1 m, Net weight= 130 kg,
Height=0.76 m, Overall length= 0.625 m, Overall width= 0.585 m, Net weight= 45 kg,
Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,
Height=1.48 m, Overall length= 1.31 m, Overall width= 2.38 m, Net weight= 875 kg,
maximum number of results exceeded
please refine your search
