mori seiki sl used for sale

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve adapter sleeve -Type: MK3/2 -Dimensions: Ø 24/195 mm -Weight: 0.5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK4/3 -Dimensions: Ø 32/140 mm -Weight: 0.4 kg

Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m

Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Specifications: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife Luminous flux Machine with CERA 3 coating Weight: 40.3 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

T - Slot Plate Field - Test Field Total area approx. 33.54 m² 6 plates 2,000 x 1,290 mm T - groove width 30 mm Thickness of the plates 95 mm Weight approx. 1,700 kg / plate - Price per panel -

maintenance-free sliding element SANKYO OILLESS SOL 30 x 250 mm ( SOL30x250mm ) New ! Dimensions: 250 x 30 x 32 mm

maintenance-free sliding element SANKYO OILLESS 115 x Ø 50 mm sliding bush outside Ø 58 mm Opening: 36 mm, 55° New ! Dimensions: 128 x 64 x 67 mm

Limit switches AZBIL SL1-A ( SL1A ) 1240P 250 V AC 5 A 30 V DC 5 A IP67 New ! Dimensions: 60 x 18 x 62 mm

Electronic Module, 16 Slot Chassis ALLEN - BRADLEY 16 Slot I/O Chassis 1771 - A4B B ( 1771-A4BB ) 968148908 A01 Dimensions: 610 x 315 x 200 mm

consisting of different shapes, sizes and designs Auction-ID: A7-49089-10

Hydraulic Cylinder SPOAC SLA 32070AP ( SLA32070AP ) S 401344 C = 600 Piston diameter: Ø 320 mm rod: Ø 70 mm stroke: 600 mm New ! Dimensions 540 x 540 x 830 mm

Slot weights, commercial weights, test weights PAGUS 500 g brass set 2 pcs. Accuracy: M3 diameter Ø 90 mm Dimension: 90 x 90 x 27 mm

Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: Solid, Round loop double woven hose | EN 1492/1-2 -Type/Loading capacity: WLL 10,000 kg -Length: 4.0 m -Quantity: 4x round slings available -Price: per piece -Transport dimensions: Ø 540 x 100 mm -Weight: 7.3 kg/pc.

Reinforcement Sleeve Set, Reinforcement Sleeve PARKER 8 TIZ.375-SS ( 8TIZ.375-SS ) Tube Diameter(Inner): Ø 10 mm Tube Diameter(Outside): Ø 12 mm Reinforcement Sleeve Set consists of 30 sleeves ! stainless steel. New ! Dimensions(Single Sleeve): 12 x 12 x 16 mm Dimensions: 100 x 80 x 20 mm

Slot weights, commercial weights, test weights PAGUS 250 g brass set 4 pcs. accuracy: M3 diameter Ø 50 mm Dimension: 50 x 50 x 72 mm

Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: Solid, Round loop double woven hose | EN 1492/1-2 -Type/Loading capacity: WLL 15,000 kg -Length: 1.5 m -Quantity: 1x round sling available -Transport dimensions: Ø 400 x 100 mm -Weight: 5.2 kg

3-Leg Chain Sling with Horizontal Clamps PAGUS 3 x Clamp 6 FHS FV0001 ( 6FHSFV0001 ) 3000 kg Gripping range: 0 - 100 mm Useful length with horizontal clamps: 2500 mm article consists of a 3-strand chain sling and 3 horizontal clamps used, tested ! Dimensions: 550 x 470 x 300 mm

Slot weights, commercial weights, test weights PAGUS 100 g brass set 5 pcs. Accuracy: presumably M3 diameter Ø 33 mm Dimensions: 33 x 33 x 68 mm

Slotted Weight Support Bar, Commercial Weights, Test Weights PAGUS 500 g Beam Bar + 10 pcs Slotted Weights Brass a 500 g Accuracy: M3 Diameter Ø 90 mm Dimensions: 90 x 90 x 410 mm

Bezel, Luenette, Self-Centering Luenette RÖHM SLZP-52180 ID. NO.: 685652 - S05 4-645-003-0 Clamping diameter: Ø 50 - 80 mm Swing: 180 mm Dimensions: 430 x 300 x 80 mm

Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: Solid, Round loop double woven hose | EN 1492/1-2 -Type/Loading capacity: WLL 8,000 kg -Length: 3.0 m -Quantity: 3x round slings available -Transport dimensions: Ø 400 x 80 mm -Weight: 4.2 kg/pc.

Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: Solid, Round sling EN 1492-2 PES -Type/Loading capacity: WLL 8,000 kg -Length: 6.0 m -Quantity: 4x round slings available -Transport dimensions: Ø 600 x 85 mm -Weight: 9.8 kg/pc.

Slot Weight Carrier Bar, Commercial Weights, Test Weights PAGUS 250 g Beam Bar + 14 pcs Brass Slot Weights a 250 g Accuracy: M3 Diameter Ø 50 mm Dimension: 50 x 50 x 810 mm

Compact slide SMC MXQ8-20 stroke 20 mm 1.5 - 7 bar piston diameter: Ø 8 mm slide: 62 x 32 mm used, tested ! Dimensions: 95 x 45 x 70 mm

Lifting strap, lifting belt, crane strap, lifting sling, round sling, double woven hose -Manufacturer: Solid, Round sling EN 1492-2 PES -Type/Loading capacity: WLL 8,000 kg -Length: 4.0 m -Quantity: 2x round slings available -Transport dimensions: Ø 450 x 80 mm -Weight: 6.3 kg/pc.

Slot Weight Beam Bar, Commercial Weights, Test Weights PAGUS 100 g Beam Bar + 20 pcs Brass Slot Weights a 100 g Accuracy: presumably M3 diameter 33 mm Bore of weights: Ø 8 mm Slot of weights: 6 mm Carrier rod: Ø top 6 bottom 7 mm Dimensions: 33 x 33 x 710 mm

2 pieces, reducing sleeves RH RÖHM 262 MK5 : MK3 DIN 2185 Dimensions: 170 x 40 x 90 mm

Centrifugal bucket set for steel gravel blasting machine GISAG PDS 2500 Dimensions(one bucket): 160 x 50 x 17 mm Thickness without side margin: approx. 12 mm Bore: Ø 11 mm spare part e.g. for GISAG PDS 2500/3 ! slingshot blade set consists of 8 pieces ! New !' Dimensions: 160 x 160 x 50 mm

Ultrasonic cake slicer Lummer U-301 - Ultrasonic cake slicer - Manufacturer: Lummer Food Technology - Type: U-301 - 3x300V50Hz - 3.0 kW - Year of construction : 09 / 2015

Centrifugal bucket set for steel gravel blasting machine, reinforced version GISAG PDS 2500 Dimensions(one bucket): 160 x 50 x 28 mm Thickness without side margin: approx. 10 mm Bore: Ø 11 mm spare part e.g. for GISAG PDS 2500/3 ! slingshot blade set consists of 8 pieces !' New !' Dimensions: 240 x 160 x 50 mm

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeve Ø28 mm -Type: F28X2X75 -Recording: MK2 -Quantity: 2x adjusting sleeves available -Price: per piece -Dimensions: Ø 40 x 170 mm -Total weight: 0.6 kg/pc.

Lattenbreithalter M.M. T.L. Slatted Wideholder Stainless Steel 3600 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm Hole Spacing: 80 x 80 mm New ! Dimensions: 3800 x 170 x 170 mm

Lattenbreithalter M. T.L. Slatted Wideholder Stainless Steel 3700 2352.8611 069.670 .6-19 Diameter: Ø 153 mm Storage: 120 x 120 mm Hole Spacing: 80 x 80 mm New ! Dimensions: 3900 x 170 x 170 mm

Slewing Bearing, Swivel Bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 middle bearing diameter: 260 mm Inner diameter: 190 mm Outer diameter: 329 mm without toothing sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg

- Roll to roll cutter -Year 2008, max roll diameter 450 mms. -Max width 360 mms . -Inverter with speed control -Many cutting devices for any size

2 sling chains 2 - strand Load capacity 45 tons 2 - Strand Useful length 5,000 mm Nominal chain thickness 32 mm Crack testing according to BGR 500 in 2012 new

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

WEBER CCS 602 WITH FLOWPACK PACKAGING LINE IN PERFECT CONDITION

Good day We hereby offer you a used sliding belt conveyor belt, type ITE/P50, from the manufacturer Schunk Fördertechnik GmbH, built in 2003. The centre distance is 2300 mm, the belt width 790 mm. The drive is provided by a geared motor with drive chain. Machine documentation is no longer available. We would be pleased if this conveyor belt is interesting for you. Your service team Mertens & Frowein GmbH

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Elements: Product transport/transfer area, robot stations, packaging material feed, forming/transfer area, multi-lane magazine/handling area, number of suction stations: 16, with CE marking. An on-site inspection is possible.

Including various accessories Auction-ID: A1-49790-1516

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Key data: 140 mm, 280 mm

Zimas D290V - Lathe Special price € 2,800 instead of € 3,490 excl. VAT - 2-axis position indicator - Stepless speed adjustment with digital display - Plan feed - Camlock mount C4 - Upper slide can be rotated 360° - Tailstock adjustment +/- 5 mm for taper turning Accessories - Undermount with 1x door & 3x drawer - Three-jaw chuck 160 mm with interchangeable jaws - Fixed bezel - Centering tip - Operating tools Specifications Range: - Circumferential Ø over bed: 290 mm - Circulating Ø over cross slide: 180 mm - Turning length between tips: 700 mm - Bed width: 182 mm Headstock: - Spindle bore: 38 mm - Spindle nose: MK5 - Speed levels: infinitely variable - Speed range: 80 - 2000 rpm Feed: - Metric threads: 0.2 - 3.5 mm / 18 steps - Inch thread: 8 - 56 dpi / 21 levels - Longitudinal feed: 0.085 - 0.832 mm - Transverse feed: 0.01 - 0.10 mm Sleds a ...

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Including various accessories Auction-ID: A1-49818-1516

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

We offer a refurbished Dokadek - 159,63m² with 70% discount All elements are made with original Doka Xlife formlining. The formwork was only used 1 x, was cleaned and checked and is in top condition New value approx. 102,205.60€ Special net price: 30.661,68€ 10 Dokadek element 0.81 x 2.44m 47 Dokadek element 1.22 x 2.44m 25 Dokadek balance beams 2.44m 21mm 26 Dokadek balancing beams 1.22m 21mm 10 Dokadek balancing beams 0.81m 21mm 63 Dokadek Wall Head 66 Dokadek support head 10 Dokadek Corner Head 5 Dokadek's crosshead 3 Dokadek mounting rod B 1 Dokadek stripping tool 25 Dokadek suspension brackets H20 3 Dokadek wall brackets 5 Dokadek panel pallet 1.22 x 2.44m 1 Dokadek panel pallet 0.81 x 2.44m 2 Dokadek range of compensating beams 3 Doka reusable containers 1.20x0.80m If you have any questions, please call 0049 176 70044689, Mr. Becker. Purc ...